WIP: fix bluemap markers

New backup server just dropped!
This server is awfully slow, and the mdraid setup is awfully slow, and I doubt that this will be a good experience, but we now have a backup server again?

- Tried Disko and nixos-anywhere
- Tried using mdraid
- Found that md is ancient and bad
- Found that disko is 100% extra steps, and a lot more complicated and noisy than just formatting your disks yourself
- Found that systemd-boot doesn't support mdraid
- Found that we probably don't need to mirror the boot partition :)
- Found that old hardware is slow
- Found that old hardware can have poor support for iPXE with UEFI, and might do weird BIOS stuff on you when you least expect it
- Reaffirmed that zfs is love

Current disk layout:
- mdraid for boot/root disk
    - 4TB WD Red with 500MiB ESP with systemd-boot, Remaining mdraid - Old?
    - 4TB WD Red with 500MiB Unused partition, Remaining mdraid - Old?
- zfs pool "tank" for the actual backup data
    - 8TB Toshiba MG08 - New
    - 8TB Exos 7E10 - New

TODO:

- Document the death of Toriel on the wiki
- Document Bakke on the wiki
  - ... describing the poco loco disk layout
- Start backing stuff up
  - Restic? Borg? Rsync?
  - Make backup retention policy and zfs snapshot system
  - Document backup procedures

Reviewed-on: https://git.pvv.ntnu.no/Drift/pvv-nixos-config/pulls/87
Co-authored-by: Felix Albrigtsen <felix@albrigtsen.it>
Co-committed-by: Felix Albrigtsen <felix@albrigtsen.it>

.editorconfig

@@ -0,0 +1,10 @@
+root = true
+
+[*]
+end_of_line = lf
+insert_final_newline = true
+trim_trailing_whitespace = true
+
+[*.nix]
+indent_style = space
+indent_size = 2

.envrc

@@ -0,0 +1 @@
+use flake

.git-blame-ignore-revs

@@ -0,0 +1 @@
+e00008da1afe0d760badd34bbeddff36bb08c475

.gitea/workflows/build-topology-graph.yml

@@ -0,0 +1,32 @@
+name: "Build topology graph"
+on:
+  push:
+    branches:
+      - main
+jobs:
+  evals:
+    runs-on: debian-latest
+    steps:
+    - uses: actions/checkout@v6
+
+    - name: Install sudo
+      run: apt-get update && apt-get -y install sudo
+
+    - uses: https://github.com/cachix/install-nix-action@v31
+
+    - name: Configure Nix
+      run: echo -e "show-trace = true\nmax-jobs = auto\ntrusted-users = root\nexperimental-features = nix-command flakes\nbuild-users-group =" > /etc/nix/nix.conf
+
+    - name: Build topology graph
+      run: nix build .#topology -L
+
+    - name: Upload topology graph
+      uses: https://git.pvv.ntnu.no/Projects/rsync-action@v2
+      with:
+        source: result/*.svg
+        quote-source: false
+        target: ${{ gitea.ref_name }}/topology_graph/
+        username: gitea-web
+        ssh-key: ${{ secrets.WEB_SYNC_SSH_KEY }}
+        host: pages.pvv.ntnu.no
+        known-hosts: "pages.pvv.ntnu.no ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIH2QjfFB+city1SYqltkVqWACfo1j37k+oQQfj13mtgg"

.gitea/workflows/eval.yml

@@ -4,10 +4,10 @@ on:
   push:
 jobs:
   evals:
-    runs-on: ubuntu-latest
+    runs-on: debian-latest
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v6
     - run: apt-get update && apt-get -y install sudo
-    - uses: https://github.com/cachix/install-nix-action@v23
+    - uses: https://github.com/cachix/install-nix-action@v31
     - run: echo -e "show-trace = true\nmax-jobs = auto\ntrusted-users = root\nexperimental-features = nix-command flakes\nbuild-users-group =" > /etc/nix/nix.conf
     - run: nix flake check

.gitignore

@@ -1,2 +1,4 @@
 result*
 /configuration.nix
+/.direnv/
+*.qcow2

.mailmap

@@ -0,0 +1,25 @@
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> <daniel.olsen99@gmail.com>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Lovbrotte Olsen <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Olsen <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> danio <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Olsen <danio@bicep.pvv.ntnu.no>
+
+
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> h7x4 <h7x4@nani.wtf>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Øystein Tveit <oysteikt@pvv.ntnu.no>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> oysteikt <oysteikt@pvv.ntnu.no>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Øystein <oysteikt@pvv.org>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Oystein Kristoffer Tveit <oysteikt@pvv.ntnu.no>
+
+Felix Albrigtsen <felixalb@pvv.ntnu.no> <felix@albrigtsen.it>
+Felix Albrigtsen <felixalb@pvv.ntnu.no> <felixalbrigtsen@gmail.com>
+Felix Albrigtsen <felixalb@pvv.ntnu.no> felixalb <felixalb@pvv.ntnu.no>
+
+Peder Bergebakken Sundt <pederbs@pvv.ntnu.no> <pbsds@hotmail.com>
+
+Adrian Gunnar Lauterer <adriangl@pvv.ntnu.no> Adrian G L <adrian@lauterer.it>
+Adrian Gunnar Lauterer <adriangl@pvv.ntnu.no> Adrian Gunnar Lauterer <adrian@lauterer.it>
+
+Fredrik Robertsen <frero@pvv.ntnu.no> frero <frero@pvv.ntnu.no>
+Fredrik Robertsen <frero@pvv.ntnu.no> fredrikr79 <fredrikrobertsen7@gmail.com>

.sops.yaml

@@ -1,25 +1,37 @@
 keys:
   # Users
-  - &user_danio age17tagmpwqjk3mdy45rfesrfey6h863x8wfq38wh33tkrlrywxducs0k6tpq
+  - &user_danio age1ug30gg4y7ftuya0wdv7q0vh4egn00wlv2th7mt7cgc2ze46wmvyq9lq6ge
+  - &user_eirikwit age1ju7rd26llahz3g8tz7cy5ld52swj8gsmg0flrmrxngc0nj0avq3ssh0sn5
   - &user_felixalb age1mrnldl334l2nszuta6ywvewng0fswv2dz9l5g4qcwe3nj4yxf92qjskdx6
   - &user_oysteikt F7D37890228A907440E1FD4846B9228E814A2AAC
-  - &user_eirikwit age1ju7rd26llahz3g8tz7cy5ld52swj8gsmg0flrmrxngc0nj0avq3ssh0sn5
+  - &user_pederbs_bjarte age1zhxul786an743u0fascv4wtc5xduu7qfy803lfs539yzhgmlq5ds2lznt5
+  - &user_pederbs_nord age1wrssr4z4g6vl3fd3qme5cewchmmhm0j2xe6wf2meu4r6ycn37anse98mfs
+  - &user_pederbs_sopp age1hmpdk4h69wxpwqk9tkud39f66hprhehxtzhgw97r6dvr7v0mx5jscsuhkn
 
   # Hosts
-  - &host_jokum age1gp8ye4g2mmw3may5xg0zsy7mm04glfz3788mmdx9cvcsdxs9hg0s0cc9kt
+  - &host_bakke age1syted6kt48sumjjucggh6r3uca4x2ppp4mfungf3lamkt2le05csc99633
-  - &host_ildkule age1hn45n46ypyrvypv0mwfnpt9ddrlmw34dwlpf33n8v67jexr3lucq6ahc9x
   - &host_bekkalokk age12nj59tguy9wg882updc2vjdusx5srnxmjyfaqve4zx6jnnsaw3qsyjq6zd
-  - &host_bicep age1sl43gc9cw939z5tgha2lpwf0xxxgcnlw7w4xem4sqgmt2pt264vq0dmwx2
+  - &host_bicep age19nk55kcs7s0358jpkn75xnr57dfq6fq3p43nartvsprx0su22v7qcgcjdx
+  - &host_ildkule age1x28hmzvuv6f2n66c0jtqcca3h9rput8d7j5uek6jcpx8n9egd52sqpejq0
+  - &host_kommode age1mt4d0hg5g76qp7j0884llemy0k2ymr5up8vfudz6vzvsflk5nptqqd32ly
+  - &host_lupine-1 age1fkrypl6fu4ldsa7te4g3v4qsegnk7sd6qhkquuwzh04vguy96qus08902e
+  - &host_lupine-2 age1mu0ej57n4s30ghealhyju3enls83qyjua69986la35t2yh0q2s0seruz5n
+  - &host_lupine-3 age1j2u876z8hu87q5npfxzzpfgllyw8ypj66d7cgelmzmnrf3xud34qzkntp9
+  - &host_lupine-4 age1t8zlawqkmhye737pn8yx0z3p9cl947d9ktv2cajdc6hnvn52d3fsc59s2k
+  - &host_lupine-5 age199zkqq4jp4yc3d0hx2q0ksxdtp42xhmjsqwyngh8tswuck34ke3smrfyqu
+  - &host_ustetind age1hffjafs4slznksefmtqrlj7rdaqgzqncn4un938rhr053237ry8s3rs0v8
 
 creation_rules:
   # Global secrets
   - path_regex: secrets/[^/]+\.yaml$
     key_groups:
     - age:
-      - *host_jokum
       - *user_danio
       - *user_felixalb
       - *user_eirikwit
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt
 
@@ -31,15 +43,21 @@ creation_rules:
       - *host_bekkalokk
       - *user_danio
       - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt
 
-  - path_regex: secrets/jokum/[^/]+\.yaml$
+  - path_regex: secrets/kommode/[^/]+\.yaml$
     key_groups:
     - age:
-      - *host_jokum
+      - *host_kommode
       - *user_danio
       - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt
 
@@ -49,6 +67,9 @@ creation_rules:
       - *host_ildkule
       - *user_danio
       - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt
 
@@ -58,5 +79,48 @@ creation_rules:
       - *host_bicep
       - *user_danio
       - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
+      pgp:
+      - *user_oysteikt
+
+  - path_regex: secrets/ustetind/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_ustetind
+      - *user_danio
+      - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
+      pgp:
+      - *user_oysteikt
+
+  - path_regex: secrets/lupine/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_lupine-1
+      - *host_lupine-2
+      - *host_lupine-3
+      - *host_lupine-4
+      - *host_lupine-5
+      - *user_danio
+      - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
+      pgp:
+      - *user_oysteikt
+
+  - path_regex: secrets/bakke/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_bakke
+      - *user_danio
+      - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt

README.MD

@@ -1,57 +0,0 @@
-# PVV NixOS configs
-
-## Hvordan endre på ting
-
-Før du endrer på ting husk å ikke putte ting som skal være hemmelig uten å først lese seksjonen for hemmeligheter!
-
-Etter å ha klonet prosjektet ned og gjort endringer kan du evaluere configene med:
-
-`nix flake check --keep-going`
-
-før du bygger en maskin med:
-
-`nix build .#<maskinnavn>`
-
-hvis du vil være ekstra sikker på at alt bygger så kan du kjøre:
-
-`nix build .` for å bygge alle de viktige maskinene.
-
-NB: Dette kan ta opp til 30 minutter avhengig av hva som ligger i caches
-
-Husk å hvertfall stage nye filer om du har laget dem!
-
-Om alt bygger fint commit det og push til git repoet.
-Det er sikkert lurt å lage en PR først om du ikke er vandt til nix enda.
-
-Innen 24h skal alle systemene hente ned den nye konfigurasjonen og deploye den.
-
-Du kan tvinge en maskin til å oppdatere seg før dette ved å kjøre:
-`nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --flake git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git --upgrade`
-
-som root på maskinen.
-
-## Seksjonen for hemmeligheter
-
-For at hemmeligheter ikke skal deles med hele verden i git - eller å være world
-readable i nix-storen, bruker vi [sops-nix](https://github.com/Mic92/sops-nix)
-
-For å legge til secrets kan du kjøre f.eks. `sops secrets/jokum/jokum.yaml`
-Dette vil dekryptere filen og gi deg en text-editor du kan bruke for endre hemmelighetene.
-
-Et nix shell med dette verktøyet inkludert ligger i flaket og shell.nix og kan aktiveres med:
-
-`nix-shell` eller `nix develop`. Vi anbefaler det siste.
-I tilegg kan du sette opp [direnv](https://direnv.net/) slik at dette skjer automatisk
-
-for å få tilgang til å lese/skrive hemmeligheter må du spørre noen/noe som har tilgang til hemmelighetene
-om å legge til age eller pgp nøkkelen din i [`.sops.yaml`](https://git.pvv.ntnu.no/Drift/pvv-nixos-config/src/main/.sops.yaml)
-
-Denne kan du generere fra ssh-nøkkelene dine eller lage en egen nøkkel.
-
-### Legge til flere keys
-
-Gjør det som gir mening i .sops.yml
-
-Etter det kjør `sops updatekeys secrets/host/file.yml`
-
-MERK at det ikke er `sops -r` som BARE roterer nøkklene for de som allerede er i secretfila

README.md

@@ -0,0 +1,36 @@
+# PVV NixOS config
+
+This repository contains the NixOS configurations for Programvareverkstedet's server closet.
+In addition to machine configurations, it also contains a bunch of shared modules, packages, and
+more.
+
+## Machines
+
+| Name                       | Type     | Description                                               |
+|----------------------------|----------|-----------------------------------------------------------|
+| [bekkalokk][bek]           | Physical | Our main web host, webmail, wiki, idp, minecraft map, ... |
+| [bicep][bic]               | Virtual  | Database host, matrix, git mirrors, ...                   |
+|  bikkje                    | Virtual  | Experimental login box                                    |
+| [brzeczyszczykiewicz][brz] | Physical | Shared music player                                       |
+| [georg][geo]               | Physical | Shared music player                                       |
+| [ildkule][ild]             | Virtual  | Logging and monitoring host, prometheus, grafana, ...     |
+| [kommode][kom]             | Virtual  | Gitea + Gitea pages                                       |
+| [lupine][lup]              | Physical | Gitea CI/CD runners                                       |
+|  shark                     | Virtual  | Test host for authentication, absolutely horrendous       |
+| [wenche][wen]              | Virtual  | Nix-builders, general purpose compute                     |
+
+## Documentation
+
+- [Development - working on the PVV machines](./docs/development.md)
+- [Miscellaneous development notes](./docs/development-misc.md)
+- [User management](./docs/users.md)
+- [Secret management and `sops-nix`](./docs/secret-management.md)
+
+[bek]: https://wiki.pvv.ntnu.no/wiki/Maskiner/bekkalokk
+[bic]: https://wiki.pvv.ntnu.no/wiki/Maskiner/bicep
+[brz]: https://wiki.pvv.ntnu.no/wiki/Maskiner/brzęczyszczykiewicz
+[geo]: https://wiki.pvv.ntnu.no/wiki/Maskiner/georg
+[ild]: https://wiki.pvv.ntnu.no/wiki/Maskiner/ildkule
+[kom]: https://wiki.pvv.ntnu.no/wiki/Maskiner/kommode
+[lup]: https://wiki.pvv.ntnu.no/wiki/Maskiner/lupine
+[wen]: https://wiki.pvv.ntnu.no/wiki/Maskiner/wenche

base.nix

@@ -1,133 +0,0 @@
-{ config, lib, pkgs, inputs, values, ... }:
-
-{
-  imports = [
-    ./users
-    ./modules/snakeoil-certs.nix
-  ];
-
-  networking.domain = "pvv.ntnu.no";
-  networking.useDHCP = false;
-  # networking.search = [ "pvv.ntnu.no" "pvv.org" ];
-  # networking.nameservers = lib.mkDefault [ "129.241.0.200" "129.241.0.201" ];
-  # networking.tempAddresses = lib.mkDefault "disabled";
-  # networking.defaultGateway = values.hosts.gateway;
-
-  systemd.network.enable = true;
-
-  services.resolved = {
-    enable = lib.mkDefault true;
-    dnssec = "false"; # Supposdly this keeps breaking and the default is to allow downgrades anyways...
-  };
-
-  time.timeZone = "Europe/Oslo";
-
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus16";
-    keyMap = "no";
-  };
-
-  system.autoUpgrade = {
-    enable = true;
-    flake = "git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git";
-    flags = [
-      "--update-input" "nixpkgs"
-      "--update-input" "nixpkgs-unstable"
-      "--no-write-lock-file"
-    ];
-  };
-  nix.gc.automatic = true;
-  nix.gc.options = "--delete-older-than 2d";
-
-  nix.settings.experimental-features = [ "nix-command" "flakes" ];
-
-  /* This makes commandline tools like
-  ** nix run nixpkgs#hello
-  ** and nix-shell -p hello
-  ** use the same channel the system
-  ** was built with
-  */
-  nix.registry = {
-    nixpkgs.flake = inputs.nixpkgs;
-  };
-  nix.nixPath = [ "nixpkgs=${inputs.nixpkgs}" ];
-
-  environment.systemPackages = with pkgs; [
-    file
-    git
-    gnupg
-    htop
-    nano
-    ripgrep
-    rsync
-    screen
-    tmux
-    vim
-    wget
-
-    kitty.terminfo
-  ];
-
-  programs.zsh.enable = true;
-
-  users.groups."drift".name = "drift";
-
-  # Trusted users on the nix builder machines
-  users.groups."nix-builder-users".name = "nix-builder-users";
-
-  services.openssh = {
-    enable = true;
-    extraConfig = ''
-      PubkeyAcceptedAlgorithms=+ssh-rsa
-    '';
-    settings.PermitRootLogin = "yes";
-  };
-
-  # nginx return 444 for all nonexistent virtualhosts
-
-  systemd.services.nginx.after = [ "generate-snakeoil-certs.service" ];
-
-  environment.snakeoil-certs = lib.mkIf config.services.nginx.enable {
-    "/etc/certs/nginx" = {
-      owner = "nginx";
-      group = "nginx";
-    };
-  };
-
-  services.nginx = {
-    recommendedTlsSettings = true;
-    recommendedProxySettings = true;
-    recommendedOptimisation = true;
-    recommendedGzipSettings = true;
-
-    appendConfig = lib.mkIf (!config.services.matrix-synapse-next.enable or false) ''
-      pcre_jit on;
-      worker_processes auto;
-      worker_rlimit_nofile 100000;
-    '';
-    eventsConfig = lib.mkIf (!config.services.matrix-synapse-next.enable or false) ''
-      worker_connections 2048;
-      use epoll;
-      multi_accept on;
-    '';
-  };
-
-  systemd.services.nginx.serviceConfig = lib.mkIf (!config.services.matrix-synapse-next.enable or false) {
-    LimitNOFILE = 65536;
-  };
-
-  services.nginx.virtualHosts."_" = lib.mkIf config.services.nginx.enable {
-    sslCertificate = "/etc/certs/nginx.crt";
-    sslCertificateKey = "/etc/certs/nginx.key";
-    addSSL = true;
-    extraConfig = "return 444;";
-  };
-
-  networking.firewall.allowedTCPPorts = lib.mkIf config.services.nginx.enable [ 80 443 ];
-
-  security.acme = {
-    acceptTerms = true;
-    defaults.email = "drift@pvv.ntnu.no";
-  };
-}

base/default.nix

@@ -0,0 +1,89 @@
+{
+  pkgs,
+  lib,
+  fp,
+  ...
+}:
+
+{
+  imports = [
+    (fp /users)
+    (fp /modules/snakeoil-certs.nix)
+
+    ./networking.nix
+    ./nix.nix
+    ./vm.nix
+    ./flake-input-exporter.nix
+
+    ./services/acme.nix
+    ./services/uptimed.nix
+    ./services/auto-upgrade.nix
+    ./services/dbus.nix
+    ./services/fwupd.nix
+    ./services/irqbalance.nix
+    ./services/logrotate.nix
+    ./services/nginx.nix
+    ./services/openssh.nix
+    ./services/postfix.nix
+    ./services/prometheus-node-exporter.nix
+    ./services/prometheus-systemd-exporter.nix
+    ./services/promtail.nix
+    ./services/smartd.nix
+    ./services/thermald.nix
+    ./services/userborn.nix
+    ./services/userdbd.nix
+  ];
+
+  boot.tmp.cleanOnBoot = lib.mkDefault true;
+  boot.kernelPackages = lib.mkDefault pkgs.linuxPackages_latest;
+
+  time.timeZone = "Europe/Oslo";
+
+  i18n.defaultLocale = "en_US.UTF-8";
+  console = {
+    font = "Lat2-Terminus16";
+    keyMap = "no";
+  };
+
+  environment.systemPackages = with pkgs; [
+    file
+    git
+    gnupg
+    htop
+    nano
+    ripgrep
+    rsync
+    screen
+    tmux
+    vim
+    wget
+
+    kitty.terminfo
+  ];
+
+  # .bash_profile already works, but lets also use .bashrc like literally every other distro
+  # https://man.archlinux.org/man/core/bash/bash.1.en#INVOCATION
+  # home-manager usually handles this for you: https://github.com/nix-community/home-manager/blob/22a36aa709de7dd42b562a433b9cefecf104a6ee/modules/programs/bash.nix#L203-L209
+  # btw, programs.bash.shellInit just goes into environment.shellInit which in turn goes into /etc/profile, spooky shit
+  programs.bash.shellInit = ''
+    if [ -n "''${BASH_VERSION:-}" ]; then
+      if [[ ! -f ~/.bash_profile && ! -f ~/.bash_login ]]; then
+       [[ -f ~/.bashrc ]] && . ~/.bashrc
+      fi
+    fi
+  '';
+
+  programs.zsh.enable = true;
+
+  # security.lockKernelModules = true;
+  security.protectKernelImage = true;
+  security.sudo.execWheelOnly = true;
+  security.sudo.extraConfig = ''
+    Defaults lecture = never
+  '';
+
+  users.groups."drift".name = "drift";
+
+  # Trusted users on the nix builder machines
+  users.groups."nix-builder-users".name = "nix-builder-users";
+}

base/flake-input-exporter.nix

@@ -0,0 +1,55 @@
+{
+  config,
+  inputs,
+  lib,
+  pkgs,
+  values,
+  ...
+}:
+let
+  data = lib.flip lib.mapAttrs inputs (
+    name: input: {
+      inherit (input)
+        lastModified
+        ;
+    }
+  );
+  folder = pkgs.writeTextDir "share/flake-inputs" (
+    lib.concatMapStringsSep "\n" (
+      { name, value }: ''nixos_last_modified_input{flake="${name}"} ${toString value.lastModified}''
+    ) (lib.attrsToList data)
+  );
+  port = 9102;
+in
+{
+  services.nginx.virtualHosts."${config.networking.fqdn}-nixos-metrics" = {
+    serverName = config.networking.fqdn;
+    serverAliases = [
+      "${config.networking.hostName}.pvv.org"
+    ];
+    locations."/metrics" = {
+      root = "${folder}/share";
+      tryFiles = "/flake-inputs =404";
+      extraConfig = ''
+        default_type text/plain;
+      '';
+    };
+    listen = [
+      {
+        inherit port;
+        addr = "0.0.0.0";
+      }
+    ];
+    extraConfig = ''
+      allow ${values.hosts.ildkule.ipv4}/32;
+      allow ${values.hosts.ildkule.ipv6}/128;
+      allow 127.0.0.1/32;
+      allow ::1/128;
+      allow ${values.ipv4-space};
+      allow ${values.ipv6-space};
+      deny all;
+    '';
+  };
+
+  networking.firewall.allowedTCPPorts = [ port ];
+}

base/networking.nix

@@ -0,0 +1,13 @@
+{ lib, values, ... }:
+{
+  systemd.network.enable = true;
+  networking.domain = "pvv.ntnu.no";
+  networking.useDHCP = false;
+
+  # The rest of the networking configuration is usually sourced from /values.nix
+
+  services.resolved = {
+    enable = lib.mkDefault true;
+    dnssec = "false"; # Supposdly this keeps breaking and the default is to allow downgrades anyways...
+  };
+}

base/nix.nix

@@ -0,0 +1,40 @@
+{ lib, config, inputs, ... }:
+{
+  nix = {
+    gc = {
+      automatic = true;
+      options = "--delete-older-than 2d";
+    };
+    optimise.automatic = true;
+
+    settings = {
+      allow-dirty = true;
+      auto-allocate-uids = true;
+      builders-use-substitutes = true;
+      experimental-features = [ "nix-command" "flakes" "auto-allocate-uids" ];
+      log-lines = 50;
+      use-xdg-base-directories = true;
+    };
+
+    /* This makes commandline tools like
+    ** nix run nixpkgs#hello
+    ** and nix-shell -p hello
+    ** use the same channel the system
+    ** was built with
+    */
+    registry = lib.mkMerge [
+      {
+        "nixpkgs".flake = inputs.nixpkgs;
+        "nixpkgs-unstable".flake = inputs.nixpkgs-unstable;
+      }
+      # We avoid the reference to self in vmVariant to get a stable system .outPath for equivalence testing
+      (lib.mkIf (!config.virtualisation.isVmVariant) {
+        "pvv-nix".flake = inputs.self;
+      })
+    ];
+    nixPath = [
+      "nixpkgs=${inputs.nixpkgs}"
+      "unstable=${inputs.nixpkgs-unstable}"
+    ];
+  };
+}

base/services/acme.nix

@@ -0,0 +1,15 @@
+{ ... }:
+{
+  security.acme = {
+    acceptTerms = true;
+    defaults.email = "drift@pvv.ntnu.no";
+  };
+
+  # Let's not spam LetsEncrypt in `nixos-rebuild build-vm` mode:
+  virtualisation.vmVariant = {
+    security.acme.defaults.server = "https://127.0.0.1";
+    security.acme.preliminarySelfsigned = true;
+
+    users.users.root.initialPassword = "root";
+  };
+}

base/services/auto-upgrade.nix

@@ -0,0 +1,39 @@
+{ config, inputs, pkgs, lib, ... }:
+
+let
+  inputUrls = lib.mapAttrs (input: value: value.url) (import "${inputs.self}/flake.nix").inputs;
+in
+
+{
+  system.autoUpgrade = {
+    enable = true;
+    flake = "git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git";
+    flags = [
+      "--refresh"
+      "--no-write-lock-file"
+      # --update-input is deprecated since nix 2.22, and removed in lix 2.90
+      # as such we instead use --override-input combined with --refresh
+      # https://git.lix.systems/lix-project/lix/issues/400
+    ] ++ (lib.pipe inputUrls [
+      (lib.intersectAttrs {
+        nixpkgs = { };
+        nixpkgs-unstable = { };
+      })
+      (lib.mapAttrsToList (input: url: ["--override-input" input url]))
+      lib.concatLists
+    ]);
+  };
+
+  # workaround for https://github.com/NixOS/nix/issues/6895
+  # via https://git.lix.systems/lix-project/lix/issues/400
+  environment.etc = lib.mkIf (!config.virtualisation.isVmVariant) {
+    "current-system-flake-inputs.json".source
+      = pkgs.writers.writeJSON "flake-inputs.json" (
+        lib.flip lib.mapAttrs inputs (name: input:
+          # inputs.*.sourceInfo sans outPath, since writeJSON will otherwise serialize sourceInfo like a derivation
+          lib.removeAttrs (input.sourceInfo or {}) [ "outPath" ]
+            // { store-path = input.outPath; } # comment this line if you don't want to retain a store reference to the flake inputs
+        )
+      );
+  };
+}

base/services/dbus.nix

@@ -0,0 +1,7 @@
+{ ... }:
+{
+  services.dbus = {
+    enable = true;
+    implementation = "broker";
+  };
+}

base/services/fwupd.nix

@@ -0,0 +1,4 @@
+{ ... }:
+{
+  services.fwupd.enable = true;
+}

base/services/irqbalance.nix

@@ -0,0 +1,4 @@
+{ ... }:
+{
+  services.irqbalance.enable = true;
+}

base/services/logrotate.nix

@@ -0,0 +1,8 @@
+{ ... }:
+{
+  systemd.services.logrotate = {
+    documentation = [ "man:logrotate(8)" "man:logrotate.conf(5)" ];
+    unitConfig.RequiresMountsFor = "/var/log";
+    serviceConfig.ReadWritePaths = [ "/var/log" ];
+  };
+}

base/services/nginx.nix

@@ -0,0 +1,67 @@
+{ config, lib, ... }:
+{
+  # nginx return 444 for all nonexistent virtualhosts
+
+  systemd.services.nginx.after = [ "generate-snakeoil-certs.service" ];
+
+  environment.snakeoil-certs = lib.mkIf config.services.nginx.enable {
+    "/etc/certs/nginx" = {
+      owner = "nginx";
+      group = "nginx";
+    };
+  };
+
+  networking.firewall.allowedTCPPorts = lib.mkIf config.services.nginx.enable [ 80 443 ];
+
+  services.nginx = {
+    recommendedTlsSettings = true;
+    recommendedProxySettings = true;
+    recommendedOptimisation = true;
+    recommendedGzipSettings = true;
+
+    appendConfig = ''
+      # pcre_jit on;
+      worker_processes auto;
+      worker_rlimit_nofile 100000;
+    '';
+    eventsConfig = ''
+      worker_connections 2048;
+      use epoll;
+      # multi_accept on;
+    '';
+  };
+
+  systemd.services.nginx.serviceConfig = lib.mkIf config.services.nginx.enable {
+    LimitNOFILE = 65536;
+    # We use jit my dudes
+    MemoryDenyWriteExecute = lib.mkForce false;
+    # What the fuck do we use that where the defaults are not enough???
+    SystemCallFilter = lib.mkForce null;
+  };
+
+  services.nginx.virtualHosts."_" = lib.mkIf config.services.nginx.enable {
+    listen = [
+      {
+        addr = "0.0.0.0";
+        extraParameters = [
+          "default_server"
+          # Seemingly the default value of net.core.somaxconn
+          "backlog=4096"
+          "deferred"
+        ];
+      }
+      {
+        addr = "[::0]";
+        extraParameters = [
+          "default_server"
+          "backlog=4096"
+          "deferred"
+        ];
+      }
+    ];
+    sslCertificate = "/etc/certs/nginx.crt";
+    sslCertificateKey = "/etc/certs/nginx.key";
+    addSSL = true;
+    extraConfig = "return 444;";
+  };
+}

base/services/openssh.nix

@@ -0,0 +1,21 @@
+{ ... }:
+{
+  services.openssh = {
+    enable = true;
+    startWhenNeeded = true;
+    extraConfig = ''
+      PubkeyAcceptedAlgorithms=+ssh-rsa
+      Match Group wheel
+        PasswordAuthentication no
+      Match All
+    '';
+    settings.PermitRootLogin = "yes";
+
+  };
+    users.users."root".openssh.authorizedKeys.keys = [
+      "ssh-rsa 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 openstack-sleipner"
+
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICCbgJ0Uwh9VSVhfId7l9i5/jk4CvAK5rbkiab8R+moF root@sleipner"
+    ];
+}
+

base/services/postfix.nix

@@ -0,0 +1,22 @@
+{ config, pkgs, lib, ... }:
+let
+  cfg = config.services.postfix;
+in
+{
+  services.postfix = {
+    enable = true;
+
+    settings.main = {
+      myhostname = "${config.networking.hostName}.pvv.ntnu.no";
+      mydomain = "pvv.ntnu.no";
+
+      # Nothing should be delivered to this machine
+      mydestination = [ ];
+
+      relayhost = [ "smtp.pvv.ntnu.no:465" ];
+
+      smtp_tls_wrappermode = "yes";
+      smtp_tls_security_level = "encrypt";
+    };
+  };
+}

base/services/prometheus-node-exporter.nix

@@ -0,0 +1,23 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.node;
+in
+{
+  services.prometheus.exporters.node = {
+    enable = lib.mkDefault true;
+    port = 9100;
+    enabledCollectors = [ "systemd" ];
+  };
+
+  systemd.services.prometheus-node-exporter.serviceConfig = lib.mkIf cfg.enable {
+    IPAddressDeny = "any";
+    IPAddressAllow = [
+      "127.0.0.1"
+      "::1"
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
+    ];
+  };
+
+  networking.firewall.allowedTCPPorts = lib.mkIf cfg.enable [ cfg.port ];
+}

base/services/prometheus-systemd-exporter.nix

@@ -0,0 +1,26 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.systemd;
+in
+{
+  services.prometheus.exporters.systemd = {
+    enable = lib.mkDefault true;
+    port = 9101;
+    extraFlags = [
+      "--systemd.collector.enable-restart-count"
+      "--systemd.collector.enable-ip-accounting"
+    ];
+  };
+
+  systemd.services.prometheus-systemd-exporter.serviceConfig = {
+    IPAddressDeny = "any";
+    IPAddressAllow = [
+      "127.0.0.1"
+      "::1"
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
+    ];
+  };
+
+  networking.firewall.allowedTCPPorts = lib.mkIf cfg.enable [ cfg.port ];
+}

base/services/promtail.nix

@@ -0,0 +1,38 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.node;
+in
+{
+  services.promtail = {
+    enable = lib.mkDefault true;
+    configuration = {
+      server = {
+        http_listen_port = 28183;
+        grpc_listen_port = 0;
+      };
+      clients = [{
+        url = "http://ildkule.pvv.ntnu.no:3100/loki/api/v1/push";
+      }];
+      scrape_configs = [{
+        job_name = "systemd-journal";
+        journal = {
+          max_age = "12h";
+          labels = {
+            job = "systemd-journal";
+            host = config.networking.hostName;
+          };
+        };
+        relabel_configs = [
+          {
+            source_labels = [ "__journal__systemd_unit" ];
+            target_label = "unit";
+          }
+          {
+            source_labels = [ "__journal_priority_keyword" ];
+            target_label = "level";
+          }
+        ];
+      }];
+    };
+  };
+}

base/services/smartd.nix

@@ -0,0 +1,20 @@
+{ config, pkgs, lib, ... }:
+{
+  services.smartd = {
+    enable = lib.mkDefault true;
+    notifications = {
+      mail = {
+        enable = true;
+        sender = "root@pvv.ntnu.no";
+        recipient = "root@pvv.ntnu.no";
+      };
+      wall.enable = false;
+    };
+  };
+
+  environment.systemPackages = lib.optionals config.services.smartd.enable (with pkgs; [
+    smartmontools
+  ]);
+
+  systemd.services.smartd.unitConfig.ConditionVirtualization = "no";
+}

base/services/thermald.nix

@@ -0,0 +1,8 @@
+{ config, lib, ... }:
+{
+  # Let's not thermal throttle
+  services.thermald.enable = lib.mkIf (lib.all (x: x) [
+      (config.nixpkgs.system == "x86_64-linux")
+      (!config.boot.isContainer or false)
+    ]) true;
+}

base/services/uptimed.nix

@@ -0,0 +1,59 @@
+{ config, pkgs, lib, ... }:
+let
+  cfg = config.services.uptimed;
+in
+{
+  options.services.uptimed.settings = lib.mkOption {
+    description = "";
+    default = { };
+    type = lib.types.submodule {
+      freeformType = with lib.types; attrsOf (either str (listOf str));
+    };
+  };
+
+  config = {
+    services.uptimed = {
+      enable = true;
+
+      settings = let
+        stateDir = "/var/lib/uptimed";
+      in {
+        PIDFILE = "${stateDir}/pid";
+        SENDMAIL = lib.mkDefault "${pkgs.system-sendmail}/bin/sendmail -t";
+      };
+    };
+
+    systemd.services.uptimed = lib.mkIf (cfg.enable) {
+      serviceConfig = let
+        uptimed = pkgs.uptimed.overrideAttrs (prev: {
+          postPatch = ''
+             substituteInPlace Makefile.am \
+               --replace-fail '$(sysconfdir)/uptimed.conf' '/var/lib/uptimed/uptimed.conf'
+             substituteInPlace src/Makefile.am \
+               --replace-fail '$(sysconfdir)/uptimed.conf' '/var/lib/uptimed/uptimed.conf'
+          '';
+        });
+
+      in {
+        Type = "notify";
+
+        ExecStart = lib.mkForce "${uptimed}/sbin/uptimed -f";
+
+        BindReadOnlyPaths = let
+          configFile = lib.pipe cfg.settings [
+            (lib.mapAttrsToList
+              (k: v:
+                if builtins.isList v
+                  then lib.mapConcatStringsSep "\n" (v': "${k}=${v'}") v
+                  else "${k}=${v}")
+            )
+            (lib.concatStringsSep "\n")
+            (pkgs.writeText "uptimed.conf")
+          ];
+        in [
+          "${configFile}:/var/lib/uptimed/uptimed.conf"
+        ];
+      };
+    };
+  };
+}

base/services/userborn.nix

@@ -0,0 +1,4 @@
+{ ... }:
+{
+  services.userborn.enable = true;
+}

base/services/userdbd.nix

@@ -0,0 +1,4 @@
+{ ... }:
+{
+  services.userdbd.enable = true;
+}

base/vm.nix

@@ -0,0 +1,15 @@
+{ lib, ... }:
+
+# This enables
+#     lib.mkIf (!config.virtualisation.isVmVariant) { ... }
+
+{
+  options.virtualisation.isVmVariant = lib.mkOption {
+    description = "`true` if system is build with 'nixos-rebuild build-vm'";
+    type = lib.types.bool;
+    default = false;
+  };
+  config.virtualisation.vmVariant = {
+    virtualisation.isVmVariant = true;
+  };
+}

docs/development-misc.md

@@ -0,0 +1,103 @@
+# Miscellaneous development notes
+
+This document contains a bunch of information that is not particularly specific to the pvv nixos config,
+but concerns technologies we use often or gotchas to be aware of when working with NixOS. A lot of the information
+here is already public information spread around the internet, but we've collected some of the items we use often
+here.
+
+## The firewall
+
+`networking.firewall` is a NixOS module that configures `iptables` rules on the machine. It is enabled by default on
+all of our machines, and it can be easy to forget about it when setting up new services, especially when we are the
+ones creating the NixOS module.
+
+When setting up a new service that listens on a TCP or UDP port, make sure to add the appropriate ports to either
+`networking.firewall.allowedTCPPorts` or `networking.firewall.allowedUDPPorts`.
+
+You can list out the current firewall rules by running `sudo iptables -L -n -v` on the machine.
+
+## Finding stuff
+
+Finding stuff, both underlying implementation and usage is absolutely crucial when working on nix.
+Oftentimes, the documentation will be outdated, lacking or just plain out wrong. These are some of
+the techniques we have found to be quite good when working with nix.
+
+### [ripgrep](https://github.com/BurntSushi/ripgrep)
+
+ripgrep (or `rg` for short) is a tool that lets you recursively grep for regex patters in a directory.
+
+It is great for finding references to configuration, and where and how certain things are used. It is
+especially great when working with [nixpkgs](https://github.com/NixOS/nixpkgs), which is quite large.
+
+### GitHub Search
+
+When trying to set up a new service or reconfigure something, it is very common that someone has done it
+before you, but it has never been documented anywhere. A lot of Nix code exists on GitHub, and you can
+easily query it by using the `lang:nix` filter in the search bar.
+
+For example: https://github.com/search?q=lang%3Anix+dibbler&type=code
+
+## rsync
+
+`rsync` is a tool for synchronizing files between machines. It is very useful when transferring large
+amounts of data from a to b. We use it for multiple things, often when data is produced or stored on
+one machine, and we want to process or convert it on another. For example, we use it to transfer gitea
+artifacts, to transfer gallery pictures, to transfer minecraft world data for map rendering, and more.
+
+Along with `rsync`, we often use a lesser known tool called `rrsync`, which you can use inside an ssh
+configuration (`authorized_keys` file) to restrict what paths a user can access when connecting over ssh.
+This is useful both as a security measure, but also to avoid accidental overwrites of files outside the intended
+path. `rrsync` will use chroot to restrict what paths the user can access, as well as refuse to run arbitrary commands.
+
+## `nix repl`
+
+`nix repl` is an interactive REPL for the Nix language. It is very useful for experimenting with Nix code,
+and testing out small snippets of code to make sure it behaves as expected. You can also use it to explore
+NixOS machine configurations, to interactively see that the configuration evaluates to what you expect.
+
+```
+# While in the pvv-nixos-config directory
+nix repl .
+
+# Upon writing out the config path and clickin [Tab], you will get autocompletion suggestions:
+nix-repl> nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts._
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.bekkalokk.pvv.ntnu.no-nixos-metrics
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.idp.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.minecraft.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pvv.org
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pw.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.roundcubeplaceholder.example.com
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.snappymail.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.webmail.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.wiki.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.www.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.www.pvv.org
+```
+
+## `nix why-depends`
+
+If you ever wonder why a certain package is being used as a dependency of another package,
+or another machine, you can use `nix why-depends` to find the dependency path from one package to another.
+This is often useful after updating nixpkgs and finding an error saying that a certain package is insecure,
+broken or whatnot. You can do something like the following
+
+```bash
+# Why does bekkalokk depend on openssl?
+nix why-depends .#nixosConfigurations.bekkalokk.config.system.build.toplevel .#nixosConfigurations.bekkalokk.pkgs.openssl
+
+# Why does bekkalokk's minecraft-server depend on zlib? (this is not real)
+nix why-depends .#nixosConfigurations.bekkalokk.pkgs.minecraft-server .#nixosConfigurations.bekkalokk.pkgs.zlib
+```
+
+## php-fpm
+
+php-fpm (FastCGI Process Manager) is a PHP implementation that is designed for speed and production use. We host a bunch
+of different PHP applications (including our own website), and so we use php-fpm quite a bit. php-fpm typically exposes a
+unix socket that nginx will connect to, and php-fpm will then render php upon web requests forwarded from nginx and return
+it.
+
+php-fpm has a tendency to be a bit hard to debug. It is not always very willing to spit out error messages and logs, and so
+it can be a bit hard to figure out what's up when something goes wrong. You should see some of the commented stuff laying around
+in the website code on bekkalokk for examples of how to configure php-fpm for better logging and error reporting.

docs/development.md

@@ -0,0 +1,190 @@
+# Development - working on the PVV machines
+
+This document outlines the process of editing our NixOS configurations, and testing and deploying said changes
+to the machines. Most of the information written here is specific to the PVV NixOS configuration, and the topics
+will not really cover the nix code itself in detail. You can find some more resources for that by either following
+the links from the *Upstream documentation* section below, or in [Miscellaneous development notes](./development-misc.md).
+
+## Editing nix files
+
+> [!WARN]
+> Before editing any nix files, make sure to read [Secret management and `sops-nix`](./secret-management.md)!
+> We do not want to add any secrets in plaintext to the nix files, and certainly not commit and publish
+> them into the common public.
+
+The files are plaintext code, written in the [`Nix` language](https://nix.dev/manual/nix/stable/language/).
+
+Below is a list of important files and directories, and a description of what they contain.
+
+### `flake.nix`
+
+The `flake.nix` file is a [nix flake](https://wiki.nixos.org/wiki/Flakes) and makes up the entrypoint of the
+entire configuration. It declares what inputs are used (similar to dependencies), as well as what outputs the
+flake exposes. In our case, the most important outputs are the `nixosConfigurations` (our machine configs), but
+we also expose custom modules, packages, devshells, and more. You can run `nix flake show` to get an overview of
+the outputs (however you will need to [enable the `nix-flakes` experimental option](https://wiki.nixos.org/wiki/Flakes#Setup)).
+
+You will find that a lot of the flake inputs are the different PVV projects that we develop, imported to be hosted
+on the NixOS machines. This makes it easy to deploy changes to these projects, as we can just update the flake input
+to point to a new commit or version, and then rebuild the machines.
+
+A NixOS configuration is usually made with the `nixpkgs.lib.nixosSystem` function, however we have a few custom wrapper
+functions named `nixosConfig` and `stableNixosConfig` that abstracts away some common configuration we want on all our machines.
+
+### `values.nix`
+
+`values.nix` is a somewhat rare pattern in NixOS configurations around the internet. It contains a bunch of constant values
+that we use throughout the configuration, such as IP addresses, DNS names, paths and more. This not only makes it easier to
+change the values should we need to, but it also makes the configuration more readable. Instead of caring what exact IP any
+machine has, you can write `values.machines.name.ipv4` and abstract the details away.
+
+### `base`
+
+The `base` directory contains a bunch of NixOS configuration that is common for all or most machines. Some of the config
+you will find here sets defaults for certain services without enabling them, so that when they are enabled in a machine config,
+we don't need to repeat the same defaults over again. Other parts actually enable certain services that we want on all machines,
+such as `openssh` or the auto upgrade timer.
+
+### Vendoring `modules` and `packages`
+
+Sometimes, we either find that the packages or modules provided by `nixpkgs` is not sufficient for us,
+or that they are bugged in some way that can not be easily overrided. There are also cases where the
+modules or packages does not exist. In these cases, we tend to either copy and modify the modules and
+packages from nixpkgs, or create our own. These modules and packages end up in the top-level `modules`
+and `packages` directories. They are usually exposed in `flake.nix` as flake outputs `nixosModules.<name>`
+and `packages.<platform>.<name>`, and they are usually also added to the machines that need them in the flake.
+
+In order to override or add an extra package, the easiest way is to use an [`overlay`](https://wiki.nixos.org/wiki/Overlays).
+This makes it so that the package from `pkgs.<name>` now refers to the modified variant of the package.
+
+In order to add a module, you can just register it in the modules of the nixos machine.
+In order to override a module, you also have to use `disabledModules = [ "<path-relative-to-nixpkgs/modules>" ];`.
+Use `rg` to find examples of the latter.
+
+Do note that if you believe a new module to be of high enough quality, or the change you are making to be
+relevant for every nix user, you should strongly consider also creating a PR towards nixpkgs. However,
+getting changes made there has a bit higher threshold and takes more time than making changes in the PVV config,
+so feel free to make the changes here first. We can always remove the changes again once the upstreaming is finished.
+
+### `users`, `secrets` and `keys`
+
+For `users`, see [User management](./users.md)
+
+For `secrets` and `keys`, see [Secret management and `sops-nix`](./secret-management.md)
+
+### Collaboration
+
+We use our gitea to collaborate on changes to the nix configuration. Every PVV maintenance member should have
+access to the repository. The usual workflow is that we create a branch for the change we want to make, do a bunch
+of commits and changes, and then open a merge request for review (or just rebase on master if you know what you are doing).
+
+### Upstream documentation
+
+Here are different sources of documentation and stuff that you might find useful while
+writing, editing and debugging nix code.
+
+ - [nixpkgs repository](https://github.com/NixOS/nixpkgs)
+
+This is particularly useful to read the source code, as well as upstreaming pieces of code that we think
+everyone would want
+
+ - [NixOS search](https://search.nixos.org/)
+
+This is useful for searching for both packages and NixOS options.
+
+ - [nixpkgs documentation](https://nixos.org/manual/nixpkgs/stable/)
+ - [NixOS documentation](https://nixos.org/manual/nixos/stable/)
+ - [nix (the tool) documentation](https://nix.dev/manual/nix/stable/)
+
+All of the three above make up the official documentation with all technical
+details about the different pieces that makes up NixOS.
+
+ - [The official NixOS wiki](https://wiki.nixos.org)
+
+User-contributed guides, tips and tricks, and whatever else.
+
+ - [nix.dev](https://nix.dev)
+
+Additional stuff
+
+ - [Noogle](https://noogle.dev)
+
+This is useful when looking for nix functions and packaging helpers.
+
+## Testing and deploying changes
+
+After editing the nix files on a certain branch, you will want to test and deploy the changes to the machines.
+Unfortunately, we don't really have a good setup for testing for runtime correctness locally, but we can at least
+make sure that the code evaluates and builds correctly before deploying.
+
+To just check that the code evaluates without errors, you can run:
+
+```bash
+nix flake check
+# Or if you want to keep getting all errors before it quits:
+nix flake check --keep-going
+```
+
+> [!NOTE]
+> If you are making changes that involves creating new nix files, remember to `git add` those files before running
+> any nix commands. Nix refuses to acknowledge files that are not either commited or at least staged. It will spit
+> out an error message about not finding the file in question.
+
+### Building machine configurations
+
+To build any specific machine configuration and look at the output, you can run:
+
+```bash
+nix build .#nixosConfigurations.<machine-name>.config.system.build.toplevel
+# or just
+nix build .#<machine-name>
+```
+
+This will create a symlink name `./result` to a directory containing the built NixOS system. It is oftentimes
+the case that config files for certain services only end up in the nix store without being put into `/etc`. If you wish
+to read those files, you can often find them by looking at the systemd unit files in `./result/etc/systemd/system/`.
+(if you are using vim, `gf` or go-to-file while the cursor is over a file path is a useful trick while doing this).
+
+If you have edited something that affects multiple machines, you can also build all important machines at once by running:
+
+```bash
+nix build .#
+```
+
+> [!NOTE]
+> Building all machines at once can take a long time, depending on what has changed and whether you have already
+> built some of the machines recently. Be prepared to wait for up to an hour to build all machines from scratch
+> if this is the first time.
+
+### Deploying to machines
+
+> [!WARN]
+> Be careful to think about state when testing changes against the machines. Sometimes, a certain change
+> can lead to irreversible changes to the data stored on the machine. An example would be a set of database
+> migrations applied when testing a newer version of a service. Unless that service also comes with downwards
+> migrations, you can not go back to the previous version without losing data.
+
+To deploy the changes to a machine, you should first SSH into the machine, and clone the pvv-nixos-config
+repository unless you have already done so. After that, checkout the branch you want to deploy from, and rebuild:
+
+```bash
+# Run this while in the pvv-nixos-config directory
+sudo nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --flake .# --upgrade
+```
+
+This will rebuild the NixOS system on the current branch and switch the system configuration to reflect the new changes.
+
+Note that unless you eventually merge the current changes into `main`, the machine will rebuild itself automatically and
+revert the changes on the next nightly rebuild (tends to happen when everybody is asleep).
+
+### Forcefully reset to `main`
+
+If you ever want to reset a machine to the `main` branch, you can do so by running:
+
+```bash
+nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --upgrade --flake git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git
+```
+
+This will ignore the current branch and just pull the latest `main` from the git repository directly from gitea.
+You can also use this command if there are updates on the `main` branch that you want to deploy to the machine without
+waiting for the nightly rebuild.

docs/secret-management.md

@@ -0,0 +1,160 @@
+# Secret management and `sops-nix`
+
+Nix config is love, nix config is life, and publishing said config to the
+internet is not only a good deed and kinda cool, but also encourages properly
+secured configuration as opposed to [security through obscurity](https://en.wikipedia.org/wiki/Security_through_obscurity).
+That being said, there are some details of the config that we really shouldn't
+share with the general public. In particular, there are so-called *secrets*, that is
+API keys, passwords, tokens, cookie secrets, salts, peppers and jalapenos that we'd
+rather keep to ourselves. However, it is not entirely trivial to do so in the NixOS config.
+For one, we'd have to keep these secrets out of the public git repo somehow, and secondly
+everything that is configured via nix ends up as world readable files (i.e. any user on the
+system can read the file) in `/nix/store`.
+
+In order to solve this, we use a NixOS module called [`sops-nix`](https://github.com/Mic92/sops-nix)
+which uses a technology called [`sops`](https://github.com/getsops/sops) behind the scenes.
+The idea is simple: we encrypt these secrets with a bunch of different keys and store the
+encrypted files in the git repo. First of all, we encrypt the secrets a bunch of time with
+PVV maintenance member's keys, so that we can decrypt and edit the contents. Secondly, we
+encrypt the secrets with the [host keys]() of the NixOS machines, so that they can decrypt
+the secrets. The secrets will be decrypted and stored in a well-known location (usually `/run/secrets`)
+so that they do not end up in the nix store, and are not world readable.
+
+This way, we can both keep the secrets in the git repository and let multiple people edit them,
+but also ensure that they don't end up in the wrong hands.
+
+## Adding a new machine
+
+In order to add a new machine to the nix-sops setup, you should do the following:
+
+```console
+# Create host keys (if they don't already exist)
+ssh-keygen -A -b 4096
+
+# Derive an age-key from the public host key
+nix-shell -p ssh-to-age --run 'cat /etc/ssh/ssh_host_ed25519_key.pub | ssh-to-age'
+
+# Register the age key in .sops.yaml
+vim .sops.yaml
+```
+
+The contents of `.sops.yaml` should look like this:
+
+```yaml
+keys:
+  # Users
+  ...
+
+  # Hosts
+  ...
+  - &host_<machine_name> <public_age_key>
+
+creation_rules:
+  ...
+
+  - path_regex: secrets/<machine_name>/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_<machine_name>
+      - ... user keys
+    - pgp:
+      - ... user keys
+```
+
+> [!NOTE]
+> Take care that all the keys in the `age` and `pgp` sections are prefixed
+> with a `-`, or else sops might try to encrypt the secrets in a way where
+> you need both keys present to decrypt the content. Also, it tends to throw
+> interesting errors when it fails to do so.
+
+```console
+# While cd-ed into the repository, run this to get a shell with the `sops` tool present
+nix-shell
+```
+
+Now you should also be able to edit secrets for this machine by running:
+
+```
+sops secrets/<machine_name>/<machine_name>.yaml
+```
+
+## Adding a user
+
+Adding a user is quite similar to adding a new machine.
+This guide assumes you have already set up SSH keys.
+
+```
+# Derive an age-key from your key
+# (edit the path to the key if it is named something else)
+nix-shell -p ssh-to-age --run 'cat ~/.ssh/id_ed25519.pub | ssh-to-age'
+
+# Register the age key in .sops.yaml
+vim .sops.yaml
+```
+
+The contents of `.sops.yaml` should look like this:
+
+```yaml
+keys:
+  # Users
+  ...
+  - &user_<user_name> <public_age_key>
+
+  # Hosts
+  ...
+
+creation_rules:
+  ...
+
+  # Do this for all the machines you are planning to edit
+  # (or just do it for all machines)
+  - path_regex: secrets/<machine_name>/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_<machine_name>
+      - ... user keys
+      - *host_<user_name>
+    - pgp:
+      - ... user keys
+```
+
+Now that sops is properly configured to recognize the key, you need someone
+who already has access to decrypt all the secrets and re-encrypt them with your
+key. At this point, you should probably [open a PR](https://docs.gitea.com/usage/issues-prs/pull-request)
+and ask someone in PVV maintenance if they can checkout the PR branch, run the following
+command and push the diff back into the PR (and maybe even ask them to merge if you're feeling
+particularly needy).
+
+```console
+sops updatekeys secrets/*/*.yaml
+```
+
+## Updating keys
+
+> [!NOTE]
+> At some point, we found this flag called `sops -r` that seemed to be described to do what
+> `sops updatekeys` does, do not be fooled. This only rotates the "inner key" for those who
+> already have the secrets encrypted with their key.
+
+Updating keys is done with this command:
+
+```console
+sops updatekeys secrets/*/*.yaml
+```
+
+However, there is a small catch. [oysteikt](https://git.pvv.ntnu.no/oysteikt) has kinda been
+getting gray hairs lately, and refuses to use modern technology - he is still stuck using GPG.
+This means that to be able to re-encrypt the sops secrets, you will need to have a gpg keychain
+with his latest public key available. The key has an expiry date, so if he forgets to update it,
+you should send him and angry email and tag him a bunch of times in a gitea issue. If the key
+is up to date, you can do the following:
+
+```console
+# Fetch gpg (unless you have it already)
+nix-shell -p gpg
+
+# Import oysteikts key to the gpg keychain
+gpg --import ./keys/oysteikt.pub
+```
+
+Now you should be able to run the `sops updatekeys` command again.

docs/users.md

@@ -0,0 +1,50 @@
+# User management
+
+Due to some complications with how NixOS creates users compared to how we used to
+create users with the salt-based setup, the NixOS machine users are created and
+managed separately. We tend to create users on-demand, whenever someone in PVV
+maintenance want to work on the NixOS machines.
+
+## Setting up a new user
+
+You can find the files for the existing users, and thereby examples of user files
+in the [`users`](../users) directory. When creating a new file here, you should name it
+`your-username.nix`, and add *at least* the following contents:
+
+```nix
+{ pkgs, ... }:
+{
+  users.users."<username>" = {
+    isNormalUser = true;
+    extraGroups = [
+      "wheel" # In case you wanna use sudo (you probably do)
+      "nix-builder-users" # Arbitrary access to write to the nix store
+    ];
+
+    # Any packages you frequently use to manage servers go here.
+    # Please don't pull gigantonormous packages here unless you
+    # absolutely need them, and remember that any package can be
+    # pulled via nix-shell if you only use it once in a blue moon.
+    packages = with pkgs; [
+      bottom
+      eza
+    ];
+
+    # Not strictly needed, but we recommend adding your public SSH
+    # key here. If it is not present, you will have to log into the
+    # machine as 'root' before setting your password for every NixOS
+    # machine you have not logged into yet.
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIjiQ0wg4lpC7YBMAAHoGmgwqHOBi+EUz5mmCymGlIyT my-key"
+    ];
+  };
+}
+```
+
+The file will be picked up automatically, so creating the file and adding the
+contents should be enough to get you registered. You should
+[open a PR](https://docs.gitea.com/usage/issues-prs/pull-request) with the new
+code so the machines will be rebuilt with your user present.
+
+See also [Secret Management](./secret-management.md) for how to add your keys to the
+system that lets us add secrets (API keys, password, etc.) to the NixOS config.

flake.lock

@@ -1,5 +1,26 @@
 {
   "nodes": {
+    "devshell": {
+      "inputs": {
+        "nixpkgs": [
+          "nix-topology",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1728330715,
+        "narHash": "sha256-xRJ2nPOXb//u1jaBnDP56M7v5ldavjbtR6lfGqSvcKg=",
+        "owner": "numtide",
+        "repo": "devshell",
+        "rev": "dd6b80932022cea34a019e2bb32f6fa9e494dfef",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "devshell",
+        "type": "github"
+      }
+    },
     "disko": {
       "inputs": {
         "nixpkgs": [
@@ -7,39 +28,119 @@
         ]
       },
       "locked": {
-        "lastModified": 1712356478,
+        "lastModified": 1736864502,
-        "narHash": "sha256-kTcEtrQIRnexu5lAbLsmUcfR2CrmsACF1s3ZFw1NEVA=",
+        "narHash": "sha256-ItkIZyebGvNH2dK9jVGzJHGPtb6BSWLN8Gmef16NeY0=",
         "owner": "nix-community",
         "repo": "disko",
-        "rev": "0a17298c0d96190ef3be729d594ba202b9c53beb",
+        "rev": "0141aabed359f063de7413f80d906e1d98c0c123",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
+        "ref": "v1.11.0",
         "repo": "disko",
         "type": "github"
       }
     },
-    "grzegorz": {
+    "flake-compat": {
-      "inputs": {
+      "flake": false,
-        "nixpkgs": [
-          "nixpkgs-unstable"
-        ]
-      },
       "locked": {
-        "lastModified": 1696346665,
+        "lastModified": 1696426674,
-        "narHash": "sha256-J6Tf6a/zhFZ8SereluHLrvgPsIVm2CGHHA8wrbhZB3Y=",
+        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
-        "owner": "Programvareverkstedet",
+        "owner": "edolstra",
-        "repo": "grzegorz",
+        "repo": "flake-compat",
-        "rev": "9b9c3ac7d408ac7c6d67544b201e6b169afacb03",
+        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
         "type": "github"
       },
       "original": {
-        "owner": "Programvareverkstedet",
+        "owner": "edolstra",
-        "repo": "grzegorz",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1726560853,
+        "narHash": "sha256-X6rJYSESBVr3hBoH0WbKE5KvhPU5bloyZ2L4K60/fPQ=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "c1dfcf08411b08f6b8615f7d8971a2bfa81d5e8a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "gergle": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1764868579,
+        "narHash": "sha256-rfTUOIc0wnC4+19gLVfPbHfXx/ilfuUix6bWY+yaM2U=",
+        "ref": "main",
+        "rev": "9c923d1d50daa6a3b28c3214ad2300bfaf6c8fcd",
+        "revCount": 22,
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Grzegorz/gergle.git"
+      },
+      "original": {
+        "ref": "main",
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Grzegorz/gergle.git"
+      }
+    },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "nix-topology",
+          "pre-commit-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "greg-ng": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay"
+      },
+      "locked": {
+        "lastModified": 1765760377,
+        "narHash": "sha256-2+lgzUjVas9hPSeWn52MwuX+iidMN4RkzkHo4vrGmR8=",
+        "ref": "main",
+        "rev": "f340dc5b9c9f3b75b7aca41f56f8869b9e28cf8c",
+        "revCount": 58,
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Grzegorz/greg-ng.git"
+      },
+      "original": {
+        "ref": "main",
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Grzegorz/greg-ng.git"
+      }
+    },
     "grzegorz-clients": {
       "inputs": {
         "nixpkgs": [
@@ -47,17 +148,18 @@
         ]
       },
       "locked": {
-        "lastModified": 1711853301,
+        "lastModified": 1764867811,
-        "narHash": "sha256-KxRNyW/fgq690bt3B+Nz4EKLoubybcuASYyMa41bAPE=",
+        "narHash": "sha256-UWHiwr8tIcGcVxMLvAdNxDbQ8QuHf3REHboyxvFkYEI=",
-        "owner": "Programvareverkstedet",
+        "ref": "master",
-        "repo": "grzegorz-clients",
+        "rev": "c9983e947efe047ea9d6f97157a1f90e49d0eab3",
-        "rev": "c38f2f22a6d47ae2da015351a45d13cbc1eb48e4",
+        "revCount": 81,
-        "type": "github"
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git"
       },
       "original": {
-        "owner": "Programvareverkstedet",
+        "ref": "master",
-        "repo": "grzegorz-clients",
+        "type": "git",
-        "type": "github"
+        "url": "https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git"
       }
     },
     "matrix-next": {
@@ -67,19 +169,63 @@
         ]
       },
       "locked": {
-        "lastModified": 1710311999,
+        "lastModified": 1764844095,
-        "narHash": "sha256-s0pT1NyrMgeolUojXXcnXQDymN7m80GTF7itCv0ZH20=",
+        "narHash": "sha256-Drf1orxsmFDzO+UbPo85gHjXW7QzAM+6oTPvI7vOSik=",
         "owner": "dali99",
         "repo": "nixos-matrix-modules",
-        "rev": "6c9b67974b839740e2a738958512c7a704481157",
+        "rev": "25b9f31ef1dbc3987b4c716de716239f2b283701",
         "type": "github"
       },
       "original": {
         "owner": "dali99",
+        "ref": "v0.8.0",
         "repo": "nixos-matrix-modules",
         "type": "github"
       }
     },
+    "minecraft-heatmap": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay_2"
+      },
+      "locked": {
+        "lastModified": 1766407405,
+        "narHash": "sha256-UEJ8F8/oG70biWRrGbL5/aB7OXzzvnYs+jxkR07UHvA=",
+        "ref": "main",
+        "rev": "e719840f72ca1b0cd169562a3a0de69899821de0",
+        "revCount": 16,
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git"
+      },
+      "original": {
+        "ref": "main",
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git"
+      }
+    },
+    "minecraft-kartverket": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765904683,
+        "narHash": "sha256-uXM56y5n5GWpCiCNdKlTcCAy2IntgDB21c4gBDU30io=",
+        "ref": "main",
+        "rev": "6fae27b1659efb6774cf08a4e36ed29ab0e24105",
+        "revCount": 26,
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git"
+      },
+      "original": {
+        "ref": "main",
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git"
+      }
+    },
     "nix-gitea-themes": {
       "inputs": {
         "nixpkgs": [
@@ -87,63 +233,95 @@
         ]
       },
       "locked": {
-        "lastModified": 1712621190,
+        "lastModified": 1743881366,
-        "narHash": "sha256-O8xtza+wPplTmSm0EAPk8Ud9sJ6huVNY6jU21FYHCp4=",
+        "narHash": "sha256-ScGA2IHPk9ugf9bqEZnp+YB/OJgrkZblnG/XLEKvJAo=",
-        "ref": "refs/heads/main",
+        "ref": "main",
-        "rev": "812c1fc4061d534a8c7d35271ce32b6c76a9f385",
+        "rev": "db2e4becf1b11e5dfd33de12a90a7d089fcf68ec",
-        "revCount": 5,
+        "revCount": 11,
         "type": "git",
-        "url": "https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git"
+        "url": "https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
-        "url": "https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git"
+        "url": "https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git"
+      }
+    },
+    "nix-topology": {
+      "inputs": {
+        "devshell": "devshell",
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "pre-commit-hooks": "pre-commit-hooks"
+      },
+      "locked": {
+        "lastModified": 1765969653,
+        "narHash": "sha256-qVpQxyvdByeDfb+d+jhbyNna2Ie+w85iHpt4Qu0rv/E=",
+        "owner": "oddlama",
+        "repo": "nix-topology",
+        "rev": "0ed73e5a1b65eb8ed388d070ebe8dedb9182f466",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oddlama",
+        "ref": "main",
+        "repo": "nix-topology",
+        "type": "github"
       }
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1712386448,
+        "lastModified": 1767043167,
-        "narHash": "sha256-kacQwZ5WnJv4HH5s8tlZTClyiwVP8XAaywI5I7QqLIY=",
+        "narHash": "sha256-wN04/SL+8tV0D2HBIgt9dpX/03U18xoJ+8PT+dcn30E=",
-        "owner": "NixOS",
+        "rev": "0b43a6ee07997a6e319e92dcbf276c2736506944",
-        "repo": "nixpkgs",
+        "type": "tarball",
-        "rev": "7644b4bc09c6329bcd82561a076fd7add697d092",
+        "url": "https://releases.nixos.org/nixos/25.11-small/nixos-25.11.2789.0b43a6ee0799/nixexprs.tar.xz"
-        "type": "github"
       },
       "original": {
-        "id": "nixpkgs",
+        "type": "tarball",
-        "ref": "nixos-23.11-small",
+        "url": "https://nixos.org/channels/nixos-25.11-small/nixexprs.tar.xz"
-        "type": "indirect"
-      }
-    },
-    "nixpkgs-stable": {
-      "locked": {
-        "lastModified": 1711819797,
-        "narHash": "sha256-tNeB6emxj74Y6ctwmsjtMlzUMn458sBmwnD35U5KIM4=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "2b4e3ca0091049c6fbb4908c66b05b77eaef9f0c",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "release-23.11",
-        "repo": "nixpkgs",
-        "type": "github"
       }
     },
     "nixpkgs-unstable": {
       "locked": {
-        "lastModified": 1712381113,
+        "lastModified": 1767031366,
-        "narHash": "sha256-YL8miM11o/jMqOwt5DsdyhPgh/JgCl1kOIzvX7ukniY=",
+        "narHash": "sha256-SJz8tVEnXusU8OzN5ixAXQgzXv8fNIzp9ztzUyobh4s=",
-        "owner": "NixOS",
+        "rev": "d23fedd87fcd067b1d160323fae0d0e4f995527d",
-        "repo": "nixpkgs",
+        "type": "tarball",
-        "rev": "6cc8dbb00974248cdd1b7ebd05cbc7c0799ce974",
+        "url": "https://releases.nixos.org/nixos/unstable-small/nixos-26.05pre918279.d23fedd87fcd/nixexprs.tar.xz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://nixos.org/channels/nixos-unstable-small/nixexprs.tar.xz"
+      }
+    },
+    "pre-commit-hooks": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "nix-topology",
+          "nixpkgs"
+        ],
+        "nixpkgs-stable": [
+          "nix-topology",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1730797577,
+        "narHash": "sha256-SrID5yVpyUfknUTGWgYkTyvdr9J1LxUym4om3SVGPkg=",
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "rev": "1864030ed24a2b8b4e4d386a5eeaf0c5369e50a9",
         "type": "github"
       },
       "original": {
-        "id": "nixpkgs",
+        "owner": "cachix",
-        "ref": "nixos-unstable-small",
+        "repo": "pre-commit-hooks.nix",
-        "type": "indirect"
+        "type": "github"
       }
     },
     "pvv-calendar-bot": {
@@ -153,15 +331,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1693136143,
+        "lastModified": 1764869785,
-        "narHash": "sha256-amHprjftc3y/bg8yf4hITCLa+ez5HIi0yGfR7TU6UIc=",
+        "narHash": "sha256-FGTIpC7gB4lbeL0bfYzn1Ge0PaCpd7VqWBLhJBx0i4A=",
-        "ref": "refs/heads/main",
+        "ref": "main",
-        "rev": "a32894b305f042d561500f5799226afd1faf5abb",
+        "rev": "8ce7fb0b1918bdb3d1489a40d73895693955e8b2",
-        "revCount": 9,
+        "revCount": 23,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/calendar-bot.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/calendar-bot.git"
       }
@@ -173,15 +352,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1712834399,
+        "lastModified": 1767080188,
-        "narHash": "sha256-deNJvqboPk3bEoRZ/FyZnxscsf2BpS3/52JM4qXCNSA=",
+        "narHash": "sha256-BmyPuWeSQ9XREyi0KSerWRfJndmyzHNJLysBJld/KwA=",
-        "ref": "refs/heads/master",
+        "ref": "main",
-        "rev": "216e153f89f1dbdc4c98a7c1db2a40e52becc901",
+        "rev": "08a216f4473e26aa2a5349e72633c0ab24e8ffbd",
-        "revCount": 451,
+        "revCount": 534,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/nettsiden.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/nettsiden.git"
       }
@@ -189,10 +369,14 @@
     "root": {
       "inputs": {
         "disko": "disko",
-        "grzegorz": "grzegorz",
+        "gergle": "gergle",
+        "greg-ng": "greg-ng",
         "grzegorz-clients": "grzegorz-clients",
         "matrix-next": "matrix-next",
+        "minecraft-heatmap": "minecraft-heatmap",
+        "minecraft-kartverket": "minecraft-kartverket",
         "nix-gitea-themes": "nix-gitea-themes",
+        "nix-topology": "nix-topology",
         "nixpkgs": "nixpkgs",
         "nixpkgs-unstable": "nixpkgs-unstable",
         "pvv-calendar-bot": "pvv-calendar-bot",
@@ -200,26 +384,83 @@
         "sops-nix": "sops-nix"
       }
     },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "greg-ng",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765680428,
+        "narHash": "sha256-fyPmRof9SZeI14ChPk5rVPOm7ISiiGkwGCunkhM+eUg=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "eb3898d8ef143d4bf0f7f2229105fc51c7731b2f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "minecraft-heatmap",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1766371695,
+        "narHash": "sha256-W7CX9vy7H2Jj3E8NI4djHyF8iHSxKpb2c/7uNQ/vGFU=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "d81285ba8199b00dc31847258cae3c655b605e8c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
     "sops-nix": {
       "inputs": {
         "nixpkgs": [
           "nixpkgs"
-        ],
+        ]
-        "nixpkgs-stable": "nixpkgs-stable"
       },
       "locked": {
-        "lastModified": 1711855048,
+        "lastModified": 1766894905,
-        "narHash": "sha256-HxegAPnQJSC4cbEbF4Iq3YTlFHZKLiNTk8147EbLdGg=",
+        "narHash": "sha256-pn8AxxfajqyR/Dmr1wnZYdUXHgM3u6z9x0Z1Ijmz2UQ=",
         "owner": "Mic92",
         "repo": "sops-nix",
-        "rev": "99b1e37f9fc0960d064a7862eb7adfb92e64fa10",
+        "rev": "61b39c7b657081c2adc91b75dd3ad8a91d6f07a7",
         "type": "github"
       },
       "original": {
         "owner": "Mic92",
+        "ref": "master",
         "repo": "sops-nix",
         "type": "github"
       }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
     }
   },
   "root": "root",

flake.nix

@@ -2,43 +2,54 @@
   description = "PVV System flake";
 
   inputs = {
-    nixpkgs.url = "nixpkgs/nixos-23.11-small";
+    nixpkgs.url = "https://nixos.org/channels/nixos-25.11-small/nixexprs.tar.xz";
-    nixpkgs-unstable.url = "nixpkgs/nixos-unstable-small";
+    nixpkgs-unstable.url = "https://nixos.org/channels/nixos-unstable-small/nixexprs.tar.xz";
 
-    sops-nix.url = "github:Mic92/sops-nix";
+    sops-nix.url = "github:Mic92/sops-nix/master";
     sops-nix.inputs.nixpkgs.follows = "nixpkgs";
 
-    disko.url = "github:nix-community/disko";
+    disko.url = "github:nix-community/disko/v1.11.0";
     disko.inputs.nixpkgs.follows = "nixpkgs";
 
-    pvv-nettsiden.url = "git+https://git.pvv.ntnu.no/Projects/nettsiden.git";
+    nix-topology.url = "github:oddlama/nix-topology/main";
+    nix-topology.inputs.nixpkgs.follows = "nixpkgs";
+
+    pvv-nettsiden.url = "git+https://git.pvv.ntnu.no/Projects/nettsiden.git?ref=main";
     pvv-nettsiden.inputs.nixpkgs.follows = "nixpkgs";
 
-    pvv-calendar-bot.url = "git+https://git.pvv.ntnu.no/Projects/calendar-bot.git";
+    pvv-calendar-bot.url = "git+https://git.pvv.ntnu.no/Projects/calendar-bot.git?ref=main";
     pvv-calendar-bot.inputs.nixpkgs.follows = "nixpkgs";
 
-    matrix-next.url = "github:dali99/nixos-matrix-modules";
+    matrix-next.url = "github:dali99/nixos-matrix-modules/v0.8.0";
     matrix-next.inputs.nixpkgs.follows = "nixpkgs";
 
-    nix-gitea-themes.url = "git+https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git";
+    nix-gitea-themes.url = "git+https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git?ref=main";
     nix-gitea-themes.inputs.nixpkgs.follows = "nixpkgs";
 
-    grzegorz.url = "github:Programvareverkstedet/grzegorz";
+    minecraft-heatmap.url = "git+https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git?ref=main";
-    grzegorz.inputs.nixpkgs.follows = "nixpkgs-unstable";
+    minecraft-heatmap.inputs.nixpkgs.follows = "nixpkgs";
-    grzegorz-clients.url = "github:Programvareverkstedet/grzegorz-clients";
+
+    greg-ng.url = "git+https://git.pvv.ntnu.no/Grzegorz/greg-ng.git?ref=main";
+    greg-ng.inputs.nixpkgs.follows = "nixpkgs";
+    gergle.url = "git+https://git.pvv.ntnu.no/Grzegorz/gergle.git?ref=main";
+    gergle.inputs.nixpkgs.follows = "nixpkgs";
+    grzegorz-clients.url = "git+https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git?ref=master";
     grzegorz-clients.inputs.nixpkgs.follows = "nixpkgs";
+
+    minecraft-kartverket.url = "git+https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git?ref=main";
+    minecraft-kartverket.inputs.nixpkgs.follows = "nixpkgs";
   };
 
-  outputs = { self, nixpkgs, nixpkgs-unstable, pvv-nettsiden, sops-nix, disko, ... }@inputs:
+  outputs = { self, nixpkgs, nixpkgs-unstable, sops-nix, disko, ... }@inputs:
   let
-    nixlib = nixpkgs.lib;
+    inherit (nixpkgs) lib;
     systems = [
       "x86_64-linux"
       "aarch64-linux"
       "aarch64-darwin"
     ];
-    forAllSystems = f: nixlib.genAttrs systems (system: f system);
+    forAllSystems = f: lib.genAttrs systems f;
-    allMachines = nixlib.mapAttrsToList (name: _: name) self.nixosConfigurations;
+    allMachines = builtins.attrNames self.nixosConfigurations;
     importantMachines = [
       "bekkalokk"
       "bicep"
@@ -47,39 +58,84 @@
       "ildkule"
     ];
   in {
+    inputs = lib.mapAttrs (_: src: src.outPath) inputs;
+
+    pkgs = forAllSystems (system:
+      import nixpkgs {
+        inherit system;
+        config.allowUnfreePredicate = pkg: builtins.elem (lib.getName pkg)
+          [
+            "nvidia-x11"
+            "nvidia-settings"
+          ];
+      });
+
     nixosConfigurations = let
       unstablePkgs = nixpkgs-unstable.legacyPackages.x86_64-linux;
-      nixosConfig = nixpkgs: name: config: nixpkgs.lib.nixosSystem (nixpkgs.lib.recursiveUpdate
+
-        rec {
+      nixosConfig =
+        nixpkgs:
+        name:
+        configurationPath:
+        extraArgs:
+        lib.nixosSystem (lib.recursiveUpdate
+        (let
           system = "x86_64-linux";
+        in {
+          inherit system;
+
           specialArgs = {
-            inherit nixpkgs-unstable inputs;
+            inherit unstablePkgs inputs;
             values = import ./values.nix;
-          };
+            fp = path: ./${path};
+          } // extraArgs.specialArgs or { };
 
           modules = [
-            ./hosts/${name}/configuration.nix
+            configurationPath
             sops-nix.nixosModules.sops
-          ] ++ config.modules or [];
+          ] ++ extraArgs.modules or [];
 
           pkgs = import nixpkgs {
             inherit system;
-            overlays = [ ] ++ config.overlays or [ ];
+            config.allowUnfreePredicate = pkg: builtins.elem (lib.getName pkg)
+              [
+                "nvidia-x11"
+                "nvidia-settings"
+              ];
+            overlays = [
+              # Global overlays go here
+            ] ++ extraArgs.overlays or [ ];
           };
-        }
+        })
-        (removeAttrs config [ "modules" "overlays" ])
+        (builtins.removeAttrs extraArgs [
+          "modules"
+          "overlays"
+          "specialArgs"
+        ])
       );
 
-      stableNixosConfig = nixosConfig nixpkgs;
+      stableNixosConfig = name: extraArgs:
-      unstableNixosConfig = nixosConfig nixpkgs-unstable;
+          nixosConfig nixpkgs name ./hosts/${name}/configuration.nix extraArgs;
     in {
+      bakke = stableNixosConfig "bakke" {
+        modules = [
+          disko.nixosModules.disko
+        ];
+      };
       bicep = stableNixosConfig "bicep" {
         modules = [
           inputs.matrix-next.nixosModules.default
           inputs.pvv-calendar-bot.nixosModules.default
+          inputs.minecraft-heatmap.nixosModules.default
+          self.nixosModules.gickup
+          self.nixosModules.matrix-ooye
         ];
         overlays = [
-          inputs.pvv-calendar-bot.overlays.x86_64-linux.default
+          inputs.pvv-calendar-bot.overlays.default
+          inputs.minecraft-heatmap.overlays.default
+          (final: prev: {
+            inherit (self.packages.${prev.system}) out-of-your-element;
+          })
         ];
       };
       bekkalokk = stableNixosConfig "bekkalokk" {
@@ -88,42 +144,88 @@
             heimdal = unstablePkgs.heimdal;
             mediawiki-extensions = final.callPackage ./packages/mediawiki-extensions { };
             simplesamlphp = final.callPackage ./packages/simplesamlphp { };
+            bluemap = final.callPackage ./packages/bluemap.nix { };
           })
-          inputs.nix-gitea-themes.overlays.default
           inputs.pvv-nettsiden.overlays.default
         ];
         modules = [
-          inputs.nix-gitea-themes.nixosModules.default
           inputs.pvv-nettsiden.nixosModules.default
-        ];
+          self.nixosModules.bluemap
-      };
-      bob = stableNixosConfig "bob" {
-        modules = [
-          disko.nixosModules.disko
-          { disko.devices.disk.disk1.device = "/dev/vda"; }
         ];
       };
       ildkule = stableNixosConfig "ildkule" { };
       #ildkule-unstable = unstableNixosConfig "ildkule" { };
       shark = stableNixosConfig "shark" { };
+      wenche = stableNixosConfig "wenche" { };
+
+      kommode = stableNixosConfig "kommode" {
+        overlays = [
+          inputs.nix-gitea-themes.overlays.default
+        ];
+        modules = [
+          inputs.nix-gitea-themes.nixosModules.default
+        ];
+      };
+
+      ustetind = stableNixosConfig "ustetind" {
+        modules = [
+         "${nixpkgs}/nixos/modules/virtualisation/lxc-container.nix"
+        ];
+      };
 
       brzeczyszczykiewicz = stableNixosConfig "brzeczyszczykiewicz" {
         modules = [
-          inputs.grzegorz.nixosModules.grzegorz-kiosk
           inputs.grzegorz-clients.nixosModules.grzegorz-webui
+          inputs.gergle.nixosModules.default
+          inputs.greg-ng.nixosModules.default
+        ];
+        overlays = [
+          inputs.greg-ng.overlays.default
+          inputs.gergle.overlays.default
         ];
       };
       georg = stableNixosConfig "georg" {
         modules = [
-          inputs.grzegorz.nixosModules.grzegorz-kiosk
           inputs.grzegorz-clients.nixosModules.grzegorz-webui
+          inputs.gergle.nixosModules.default
+          inputs.greg-ng.nixosModules.default
+        ];
+        overlays = [
+          inputs.greg-ng.overlays.default
+          inputs.gergle.overlays.default
         ];
       };
-      buskerud = stableNixosConfig "buskerud" { };
+    }
+    //
+    (let
+      machineNames = map (i: "lupine-${toString i}") (lib.range 1 5);
+      stableLupineNixosConfig = name: extraArgs:
+          nixosConfig nixpkgs name ./hosts/lupine/configuration.nix extraArgs;
+    in lib.genAttrs machineNames (name: stableLupineNixosConfig name {
+      modules = [{ networking.hostName = name; }];
+      specialArgs.lupineName = name;
+    }));
+
+    nixosModules = {
+      bluemap = ./modules/bluemap.nix;
+      snakeoil-certs = ./modules/snakeoil-certs.nix;
+      snappymail = ./modules/snappymail.nix;
+      robots-txt = ./modules/robots-txt.nix;
+      gickup = ./modules/gickup;
+      matrix-ooye = ./modules/matrix-ooye.nix;
     };
 
     devShells = forAllSystems (system: {
-      default = nixpkgs.legacyPackages.${system}.callPackage ./shell.nix { };
+      default = nixpkgs-unstable.legacyPackages.${system}.callPackage ./shell.nix { };
+      cuda = let
+        cuda-pkgs = import nixpkgs-unstable {
+          inherit system;
+          config = {
+            allowUnfree = true;
+            cudaSupport = true;
+          };
+        };
+      in cuda-pkgs.callPackage ./shells/cuda.nix { };
     });
 
     packages = {
@@ -132,15 +234,63 @@
       in rec {
         default = important-machines;
         important-machines = pkgs.linkFarm "important-machines"
-          (nixlib.getAttrs importantMachines self.packages.x86_64-linux);
+          (lib.getAttrs importantMachines self.packages.x86_64-linux);
         all-machines = pkgs.linkFarm "all-machines"
-          (nixlib.getAttrs allMachines self.packages.x86_64-linux);
+          (lib.getAttrs allMachines self.packages.x86_64-linux);
 
         simplesamlphp = pkgs.callPackage ./packages/simplesamlphp { };
 
-        mediawiki-extensions = pkgs.callPackage ./packages/mediawiki-extensions { };
+        bluemap = pkgs.callPackage ./packages/bluemap.nix { };
-      } // nixlib.genAttrs allMachines
+
-        (machine: self.nixosConfigurations.${machine}.config.system.build.toplevel);
+        out-of-your-element = pkgs.callPackage ./packages/out-of-your-element.nix { };
+      }
+      //
+      # Mediawiki extensions
+      (lib.pipe null [
+        (_: pkgs.callPackage ./packages/mediawiki-extensions { })
+        (lib.flip builtins.removeAttrs ["override" "overrideDerivation"])
+        (lib.mapAttrs' (name: lib.nameValuePair "mediawiki-${name}"))
+      ])
+      //
+      # Machines
+      lib.genAttrs allMachines
+        (machine: self.nixosConfigurations.${machine}.config.system.build.toplevel)
+      //
+      # Nix-topology
+      (let
+        topology' = import inputs.nix-topology {
+          pkgs = import nixpkgs {
+            system = "x86_64-linux";
+            overlays = [ inputs.nix-topology.overlays.default ];
+          };
+
+          specialArgs = {
+            values = import ./values.nix;
+          };
+
+          modules = [
+            ./topology
+            {
+              nixosConfigurations = lib.mapAttrs (_name: nixosCfg: nixosCfg.extendModules {
+                modules = [
+                  inputs.nix-topology.nixosModules.default
+                  ./topology/service-extractors/greg-ng.nix
+                ];
+              }) self.nixosConfigurations;
+            }
+          ];
+        };
+      in {
+        topology = topology'.config.output;
+        topology-png = pkgs.runCommand "pvv-config-topology-png" {
+          nativeBuildInputs = [ pkgs.writableTmpDirAsHomeHook ];
+        } ''
+          mkdir -p "$out"
+          for file in '${topology'.config.output}'/*.svg; do
+            ${lib.getExe pkgs.imagemagick} -density 300 -background none "$file" "$out"/"$(basename "''${file%.svg}.png")"
+          done
+        '';
+      });
     };
   };
 }

hosts/bakke/configuration.nix

@@ -0,0 +1,25 @@
+{ config, pkgs, values, ... }:
+{
+  imports = [
+      ./hardware-configuration.nix
+      ../../base
+      ./filesystems.nix
+    ];
+
+  sops.defaultSopsFile = ../../secrets/bakke/bakke.yaml;
+  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
+  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
+  sops.age.generateKey = true;
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "bakke";
+  networking.hostId = "99609ffc";
+  systemd.network.networks."30-enp2s0" = values.defaultNetworkConfig // {
+    matchConfig.Name = "enp2s0";
+    address = with values.hosts.bakke; [ (ipv4 + "/25") (ipv6 + "/64") ];
+  };
+
+  system.stateVersion = "24.05";
+}

hosts/bakke/disks.nix

@@ -0,0 +1,83 @@
+{
+  # https://github.com/nix-community/disko/blob/master/example/boot-raid1.nix
+  # Note: Disko was used to create the initial md raid, but is no longer in active use on this host.
+  disko.devices = {
+    disk = {
+      one = {
+        type = "disk";
+        device = "/dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E2EER6N6";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              size = "500M";
+              type = "EF00";
+              content = {
+                type = "mdraid";
+                name = "boot";
+              };
+            };
+            mdadm = {
+              size = "100%";
+              content = {
+                type = "mdraid";
+                name = "raid1";
+              };
+            };
+          };
+        };
+      };
+      two = {
+        type = "disk";
+        device = "/dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E7LPLU71";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              size = "500M";
+              type = "EF00";
+              content = {
+                type = "mdraid";
+                name = "boot";
+              };
+            };
+            mdadm = {
+              size = "100%";
+              content = {
+                type = "mdraid";
+                name = "raid1";
+              };
+            };
+          };
+        };
+      };
+    };
+    mdadm = {
+      boot = {
+        type = "mdadm";
+        level = 1;
+        metadata = "1.0";
+        content = {
+          type = "filesystem";
+          format = "vfat";
+          mountpoint = "/boot";
+        };
+      };
+      raid1 = {
+        type = "mdadm";
+        level = 1;
+        content = {
+          type = "gpt";
+          partitions.primary = {
+            size = "100%";
+            content = {
+              type = "filesystem";
+              format = "ext4";
+              mountpoint = "/";
+            };
+          };
+        };
+      };
+    };
+  };
+}

hosts/bakke/filesystems.nix

@@ -0,0 +1,26 @@
+{ config, pkgs, lib, ... }:
+{
+  # Boot drives:
+  boot.swraid.enable = true;
+
+  # ZFS Data pool:
+  environment.systemPackages = with pkgs; [ zfs ];
+  boot = {
+    zfs = {
+      extraPools = [ "tank" ];
+      requestEncryptionCredentials = false;
+    };
+    supportedFilesystems = [ "zfs" ];
+    kernelPackages = config.boot.zfs.package.latestCompatibleLinuxPackages;
+  };
+  services.zfs.autoScrub = {
+    enable = true;
+    interval = "Wed *-*-8..14 00:00:00";
+  };
+
+  # NFS Exports:
+  #TODO
+
+  # NFS Import mounts:
+  #TODO
+}

hosts/bakke/hardware-configuration.nix

@@ -0,0 +1,52 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ehci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=root" ];
+    };
+
+  fileSystems."/home" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=home" ];
+    };
+
+  fileSystems."/nix" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=nix" "noatime" ];
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/sdc2";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault false;
+  # networking.interfaces.eno1.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp2s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/bekkalokk/configuration.nix

@@ -1,23 +1,23 @@
-{ pkgs, values, ... }:
+{ fp, pkgs, values, ... }:
 {
   imports = [
     ./hardware-configuration.nix
 
-    ../../base.nix
+    (fp /base)
-    ../../misc/metrics-exporters.nix
 
-    #./services/keycloak.nix
+    ./services/bluemap.nix
-
-    ./services/website
-    ./services/nginx.nix
-    ./services/gitea/default.nix
-    ./services/kerberos
-    ./services/webmail
-    ./services/mediawiki
     ./services/idp-simplesamlphp
+    ./services/kerberos.nix
+    ./services/mediawiki
+    ./services/nginx.nix
+    ./services/phpfpm.nix
+    ./services/vaultwarden.nix
+    ./services/webmail
+    ./services/website
+    ./services/well-known
   ];
 
-  sops.defaultSopsFile = ../../secrets/bekkalokk/bekkalokk.yaml;
+  sops.defaultSopsFile = fp /secrets/bekkalokk/bekkalokk.yaml;
   sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
   sops.age.keyFile = "/var/lib/sops-nix/key.txt";
   sops.age.generateKey = true;
@@ -32,6 +32,8 @@
     address = with values.hosts.bekkalokk; [ (ipv4 + "/25") (ipv6 + "/64") ];
   };
 
+  services.btrfs.autoScrub.enable = true;
+
   # Do not change, even during upgrades.
   # See https://search.nixos.org/options?show=system.stateVersion
   system.stateVersion = "22.11";

hosts/bekkalokk/services/bluemap.nix

@@ -0,0 +1,131 @@
+{ config, lib, pkgs, inputs, ... }:
+let
+  vanillaSurvival = "/var/lib/bluemap/vanilla_survival_world";
+  format = pkgs.formats.hocon { };
+in {
+  # NOTE: our versino of the module gets added in flake.nix
+  disabledModules = [ "services/web-apps/bluemap.nix" ];
+
+  sops.secrets."bluemap/ssh-key" = { };
+  sops.secrets."bluemap/ssh-known-hosts" = { };
+
+  services.bluemap = {
+    enable = true;
+
+    eula = true;
+    onCalendar = "*-*-* 05:45:00"; # a little over an hour after auto-upgrade
+
+    host = "minecraft.pvv.ntnu.no";
+
+    maps = let
+      inherit (inputs.minecraft-kartverket.packages.${pkgs.stdenv.hostPlatform.system}) bluemap-export;
+    in {
+      "verden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:overworld";
+          name = "Verden";
+          sorting = 0;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          ambient-light = 0.1;
+          cave-detection-ocean-floor = -5;
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude "${bluemap-export}/overworld.hocon") ];
+          };
+        };
+      };
+      "underverden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:the_nether";
+          name = "Underverden";
+          sorting = 100;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          sky-color = "#290000";
+          void-color = "#150000";
+          sky-light = 1;
+          ambient-light = 0.6;
+          remove-caves-below-y = -10000;
+          cave-detection-ocean-floor = -5;
+          cave-detection-uses-block-light = true;
+          render-mask = [{
+            max-y = 90;
+          }];
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude {
+              required = true;
+              type = "file";
+              value = "${bluemap-export}/nether.hocon";
+            }) ];
+          };
+        };
+      };
+      "enden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:the_end";
+          name = "Enden";
+          sorting = 200;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          sky-color = "#080010";
+          void-color = "#080010";
+          sky-light = 1;
+          ambient-light = 0.6;
+          remove-caves-below-y = -10000;
+          cave-detection-ocean-floor = -5;
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude "${bluemap-export}/the-end.hocon") ];
+          };
+        };
+      };
+    };
+  };
+
+  systemd.services."render-bluemap-maps" = {
+    serviceConfig = {
+      StateDirectory = [ "bluemap/world" ];
+      ExecStartPre = let
+        rsyncArgs = lib.cli.toCommandLineShellGNU { } {
+          archive = true;
+          compress = true;
+          verbose = true;
+          no-owner = true;
+          no-group = true;
+          rsh = "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=%d/ssh-known-hosts -i %d/sshkey";
+        };
+      in "${lib.getExe pkgs.rsync} ${rsyncArgs} root@innovation.pvv.ntnu.no:/ ${vanillaSurvival}";
+      LoadCredential = [
+        "sshkey:${config.sops.secrets."bluemap/ssh-key".path}"
+        "ssh-known-hosts:${config.sops.secrets."bluemap/ssh-known-hosts".path}"
+      ];
+    };
+  };
+
+  services.nginx.virtualHosts."minecraft.pvv.ntnu.no" = {
+    enableACME = true;
+    forceSSL = true;
+    kTLS = true;
+    http3 = true;
+    quic = true;
+    http3_hq = true;
+    extraConfig = ''
+      # Enabling QUIC 0-RTT
+      ssl_early_data on;
+
+      quic_gso on;
+      quic_retry on;
+      add_header Alt-Svc 'h3=":$server_port"; ma=86400';
+    '';
+  };
+
+  networking.firewall.allowedUDPPorts = [ 443 ];
+}

hosts/bekkalokk/services/gitea/default.nix

@@ -1,107 +0,0 @@
-{ config, values, pkgs, ... }:
-let
-  cfg = config.services.gitea;
-  domain = "git.pvv.ntnu.no";
-  sshPort  = 2222;
-in {
-  imports = [
-    ./ci.nix
-  ];
-
-  sops.secrets = {
-    "gitea/database" = {
-      owner = "gitea";
-      group = "gitea";
-    };
-    "gitea/passwd-ssh-key" = { };
-    "gitea/ssh-known-hosts" = { };
-    "gitea/import-user-env" = { };
-  };
-
-  services.gitea = {
-    enable = true;
-    stateDir = "/data/gitea";
-    appName = "PVV Git";
-
-    database = {
-      type = "postgres";
-      host = "postgres.pvv.ntnu.no";
-      port = config.services.postgresql.port;
-      passwordFile = config.sops.secrets."gitea/database".path;
-      createDatabase = false;
-    };
-
-    settings = {
-      server = {
-        DOMAIN   = domain;
-        ROOT_URL = "https://${domain}/";
-        PROTOCOL = "http+unix";
-        SSH_PORT = sshPort;
-	      START_SSH_SERVER = true;
-      };
-      indexer.REPO_INDEXER_ENABLED = true;
-      service.DISABLE_REGISTRATION = true;
-      session.COOKIE_SECURE = true;
-      database.LOG_SQL = false;
-      picture = {
-        DISABLE_GRAVATAR = true;
-        ENABLE_FEDERATED_AVATAR = false;
-      };
-      actions.ENABLED = true;
-      "ui.meta".DESCRIPTION = "Bokstavelig talt programvareverkstedet";
-    };
-  };
-
-  services.gitea-themes.monokai = pkgs.gitea-theme-monokai;
-
-  environment.systemPackages = [ cfg.package ];
-
-  services.nginx.virtualHosts."${domain}" = {
-    forceSSL = true;
-    enableACME = true;
-    kTLS = true;
-    locations."/" = {
-      proxyPass = "http://unix:${cfg.settings.server.HTTP_ADDR}";
-      extraConfig = ''
-        client_max_body_size 512M;
-      '';
-    };
-  };
-
-  networking.firewall.allowedTCPPorts = [ sshPort ];
-
-  # Automatically import users
-  systemd.services.gitea-import-users = {
-    enable = true;
-    preStart=''${pkgs.rsync}/bin/rsync -e "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=$CREDENTIALS_DIRECTORY/ssh-known-hosts -i $CREDENTIALS_DIRECTORY/sshkey" -a pvv@smtp.pvv.ntnu.no:/etc/passwd /tmp/passwd-import'';
-    serviceConfig = {
-      ExecStart = pkgs.writers.writePython3 "gitea-import-users" { libraries = [ pkgs.python3Packages.requests ]; } (builtins.readFile ./gitea-import-users.py);
-      LoadCredential=[
-        "sshkey:${config.sops.secrets."gitea/passwd-ssh-key".path}"
-        "ssh-known-hosts:${config.sops.secrets."gitea/ssh-known-hosts".path}"
-      ];
-      DynamicUser="yes";
-      EnvironmentFile=config.sops.secrets."gitea/import-user-env".path;
-    };
-  };
-
-  systemd.timers.gitea-import-users = {
-    requires = [ "gitea.service" ];
-    after = [ "gitea.service" ];
-    wantedBy = [ "timers.target" ];
-    timerConfig = {
-      OnCalendar = "*-*-* 02:00:00";
-      Persistent = true;
-      Unit = "gitea-import-users.service";
-    };
-  };
-
-  system.activationScripts.linkGiteaLogo.text = let
-    logo-svg = ../../../../assets/logo_blue_regular.svg;
-    logo-png = ../../../../assets/logo_blue_regular.png;
-  in ''
-    install -Dm444 ${logo-svg} ${cfg.stateDir}/custom/public/img/logo.svg
-    install -Dm444 ${logo-png} ${cfg.stateDir}/custom/public/img/logo.png
-    install -Dm444 ${./loading.apng} ${cfg.stateDir}/custom/public/img/loading.png
-  '';
-}

hosts/bekkalokk/services/gitea/gitea-import-users.py

@@ -1,94 +0,0 @@
-import requests
-import secrets
-import os
-
-EMAIL_DOMAIN = os.getenv('EMAIL_DOMAIN')
-if EMAIL_DOMAIN is None:
-    EMAIL_DOMAIN = 'pvv.ntnu.no'
-
-API_TOKEN = os.getenv('API_TOKEN')
-if API_TOKEN is None:
-    raise Exception('API_TOKEN not set')
-
-GITEA_API_URL = os.getenv('GITEA_API_URL')
-if GITEA_API_URL is None:
-    GITEA_API_URL = 'https://git.pvv.ntnu.no/api/v1'
-
-BANNED_SHELLS = [
-    "/usr/bin/nologin",
-    "/usr/sbin/nologin",
-    "/sbin/nologin",
-    "/bin/false",
-    "/bin/msgsh",
-]
-
-existing_users = {}
-
-
-# This function should only ever be called when adding users
-# from the passwd file
-def add_user(username, name):
-    user = {
-            "full_name": name,
-            "username": username,
-            "login_name": username,
-            "source_id": 1,  # 1 = SMTP
-    }
-
-    if username not in existing_users:
-        user["password"] = secrets.token_urlsafe(32)
-        user["must_change_password"] = False
-        user["visibility"] = "private"
-        user["email"] = username + '@' + EMAIL_DOMAIN
-
-        r = requests.post(GITEA_API_URL + '/admin/users', json=user,
-                          headers={'Authorization': 'token ' + API_TOKEN})
-        if r.status_code != 201:
-            print('ERR: Failed to create user ' + username + ': ' + r.text)
-            return
-
-        print('Created user ' + username)
-        existing_users[username] = user
-
-    else:
-        user["visibility"] = existing_users[username]["visibility"]
-        r = requests.patch(GITEA_API_URL + f'/admin/users/{username}',
-                           json=user,
-                           headers={'Authorization': 'token ' + API_TOKEN})
-        if r.status_code != 200:
-            print('ERR: Failed to update user ' + username + ': ' + r.text)
-            return
-
-        print('Updated user ' + username)
-
-
-def main():
-    # Fetch existing users
-    r = requests.get(GITEA_API_URL + '/admin/users',
-                     headers={'Authorization': 'token ' + API_TOKEN})
-
-    if r.status_code != 200:
-        raise Exception('Failed to get users: ' + r.text)
-
-    for user in r.json():
-        existing_users[user['login']] = user
-
-    # Read the file, add each user
-    with open("/tmp/passwd-import", 'r') as f:
-        for line in f.readlines():
-            uid = int(line.split(':')[2])
-            if uid < 1000:
-                continue
-
-            shell = line.split(':')[-1]
-            if shell in BANNED_SHELLS:
-                continue
-
-            username = line.split(':')[0]
-            name = line.split(':')[4].split(',')[0]
-
-            add_user(username, name)
-
-
-if __name__ == '__main__':
-    main()

hosts/bekkalokk/services/idp-simplesamlphp/default.nix

@@ -84,16 +84,16 @@ let
         cp ${./config.php} "$out"
 
         substituteInPlace "$out" \
-          --replace '$SAML_COOKIE_SECURE' 'true' \
+          --replace-warn '$SAML_COOKIE_SECURE' 'true' \
-          --replace '$SAML_COOKIE_SALT' 'file_get_contents("${config.sops.secrets."idp/cookie_salt".path}")' \
+          --replace-warn '$SAML_COOKIE_SALT' 'file_get_contents("${config.sops.secrets."idp/cookie_salt".path}")' \
-          --replace '$SAML_ADMIN_NAME' '"Drift"' \
+          --replace-warn '$SAML_ADMIN_NAME' '"Drift"' \
-          --replace '$SAML_ADMIN_EMAIL' '"drift@pvv.ntnu.no"' \
+          --replace-warn '$SAML_ADMIN_EMAIL' '"drift@pvv.ntnu.no"' \
-          --replace '$SAML_ADMIN_PASSWORD' 'file_get_contents("${config.sops.secrets."idp/admin_password".path}")' \
+          --replace-warn '$SAML_ADMIN_PASSWORD' 'file_get_contents("${config.sops.secrets."idp/admin_password".path}")' \
-          --replace '$SAML_TRUSTED_DOMAINS' 'array( "idp.pvv.ntnu.no" )' \
+          --replace-warn '$SAML_TRUSTED_DOMAINS' 'array( "idp.pvv.ntnu.no" )' \
-          --replace '$SAML_DATABASE_DSN' '"pgsql:host=postgres.pvv.ntnu.no;port=5432;dbname=idp"' \
+          --replace-warn '$SAML_DATABASE_DSN' '"pgsql:host=postgres.pvv.ntnu.no;port=5432;dbname=idp"' \
-          --replace '$SAML_DATABASE_USERNAME' '"idp"' \
+          --replace-warn '$SAML_DATABASE_USERNAME' '"idp"' \
-          --replace '$SAML_DATABASE_PASSWORD' 'file_get_contents("${config.sops.secrets."idp/postgres_password".path}")' \
+          --replace-warn '$SAML_DATABASE_PASSWORD' 'file_get_contents("${config.sops.secrets."idp/postgres_password".path}")' \
-          --replace '$CACHE_DIRECTORY' '/var/cache/idp'
+          --replace-warn '$CACHE_DIRECTORY' '/var/cache/idp'
       '';
 
       "modules/authpwauth/src/Auth/Source/PwAuth.php" = ./authpwauth.php;
@@ -202,6 +202,12 @@ in
           rewrite ^/simplesaml/(.*)$ /$1 redirect;
           return 404;
         '';
+        "/robots.txt" = {
+          root = pkgs.writeTextDir "robots.txt" ''
+            User-agent: *
+            Disallow: /
+          '';
+        };
       };
     };
   };

hosts/bekkalokk/services/kerberos.nix

@@ -1,18 +1,5 @@
 { config, pkgs, lib, ... }:
 {
-  #######################
-  # TODO: remove these once nixos 24.05 gets released
-  #######################
-  imports = [
-    ./krb5.nix
-    ./pam.nix
-  ];
-  disabledModules = [
-    "config/krb5/default.nix"
-    "security/pam.nix"
-  ];
-  #######################
-
   security.krb5 = {
     enable = true;
     settings = {

hosts/bekkalokk/services/kerberos/krb5-conf-format.nix

@@ -1,88 +0,0 @@
-{ pkgs, lib, ... }:
-
-# Based on
-# - https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html
-# - https://manpages.debian.org/unstable/heimdal-docs/krb5.conf.5heimdal.en.html
-
-let
-  inherit (lib) boolToString concatMapStringsSep concatStringsSep filter
-    isAttrs isBool isList mapAttrsToList mdDoc mkOption singleton splitString;
-  inherit (lib.types) attrsOf bool coercedTo either int listOf oneOf path
-    str submodule;
-in
-{ }: {
-  type = let
-    section = attrsOf relation;
-    relation = either (attrsOf value) value;
-    value = either (listOf atom) atom;
-    atom = oneOf [int str bool];
-  in submodule {
-    freeformType = attrsOf section;
-    options = {
-      include = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Files to include in the Kerberos configuration.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-      includedir = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Directories containing files to include in the Kerberos configuration.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-      module = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Modules to obtain Kerberos configuration from.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-    };
-  };
-
-  generate = let
-    indent = str: concatMapStringsSep "\n" (line: "  " + line) (splitString "\n" str);
-
-    formatToplevel = args @ {
-      include ? [ ],
-      includedir ? [ ],
-      module ? [ ],
-      ...
-    }: let
-      sections = removeAttrs args [ "include" "includedir" "module" ];
-    in concatStringsSep "\n" (filter (x: x != "") [
-      (concatStringsSep "\n" (mapAttrsToList formatSection sections))
-      (concatMapStringsSep "\n" (m: "module ${m}") module)
-      (concatMapStringsSep "\n" (i: "include ${i}") include)
-      (concatMapStringsSep "\n" (i: "includedir ${i}") includedir)
-    ]);
-
-    formatSection = name: section: ''
-      [${name}]
-      ${indent (concatStringsSep "\n" (mapAttrsToList formatRelation section))}
-    '';
-
-    formatRelation = name: relation:
-      if isAttrs relation
-      then ''
-        ${name} = {
-        ${indent (concatStringsSep "\n" (mapAttrsToList formatValue relation))}
-        }''
-      else formatValue name relation;
-
-    formatValue = name: value:
-      if isList value
-      then concatMapStringsSep "\n" (formatAtom name) value
-      else formatAtom name value;
-
-    formatAtom = name: atom: let
-      v = if isBool atom then boolToString atom else toString atom;
-    in "${name} = ${v}";
-  in
-    name: value: pkgs.writeText name ''
-      ${formatToplevel value}
-    '';
-}

hosts/bekkalokk/services/kerberos/krb5.nix

@@ -1,90 +0,0 @@
-{ config, lib, pkgs, ... }:
-let
-  inherit (lib) mdDoc mkIf mkOption mkPackageOption mkRemovedOptionModule;
-  inherit (lib.types) bool;
-
-  mkRemovedOptionModule' = name: reason: mkRemovedOptionModule ["krb5" name] reason;
-  mkRemovedOptionModuleCfg = name: mkRemovedOptionModule' name ''
-    The option `krb5.${name}' has been removed. Use
-    `security.krb5.settings.${name}' for structured configuration.
-  '';
-
-  cfg = config.security.krb5;
-  format = import ./krb5-conf-format.nix { inherit pkgs lib; } { };
-in {
-  imports = [
-    (mkRemovedOptionModuleCfg "libdefaults")
-    (mkRemovedOptionModuleCfg "realms")
-    (mkRemovedOptionModuleCfg "domain_realm")
-    (mkRemovedOptionModuleCfg "capaths")
-    (mkRemovedOptionModuleCfg "appdefaults")
-    (mkRemovedOptionModuleCfg "plugins")
-    (mkRemovedOptionModuleCfg "config")
-    (mkRemovedOptionModuleCfg "extraConfig")
-    (mkRemovedOptionModule' "kerberos" ''
-      The option `krb5.kerberos' has been moved to `security.krb5.package'.
-    '')
-  ];
-
-  options = {
-    security.krb5 = {
-      enable = mkOption {
-        default = false;
-        description = mdDoc "Enable and configure Kerberos utilities";
-        type = bool;
-      };
-
-      package = mkPackageOption pkgs "krb5" {
-        example = "heimdal";
-      };
-
-      settings = mkOption {
-        default = { };
-        type = format.type;
-        description = mdDoc ''
-          Structured contents of the {file}`krb5.conf` file. See
-          {manpage}`krb5.conf(5)` for details about configuration.
-        '';
-        example = {
-          include = [ "/run/secrets/secret-krb5.conf" ];
-          includedir = [ "/run/secrets/secret-krb5.conf.d" ];
-
-          libdefaults = {
-            default_realm = "ATHENA.MIT.EDU";
-          };
-
-          realms = {
-            "ATHENA.MIT.EDU" = {
-              admin_server = "athena.mit.edu";
-              kdc = [
-                "athena01.mit.edu"
-                "athena02.mit.edu"
-              ];
-            };
-          };
-
-          domain_realm = {
-            "mit.edu" = "ATHENA.MIT.EDU";
-          };
-
-          logging = {
-            kdc = "SYSLOG:NOTICE";
-            admin_server = "SYSLOG:NOTICE";
-            default = "SYSLOG:NOTICE";
-          };
-        };
-      };
-    };
-  };
-
-  config = mkIf cfg.enable {
-    environment = {
-      systemPackages = [ cfg.package ];
-      etc."krb5.conf".source = format.generate "krb5.conf" cfg.settings;
-    };
-  };
-
-  meta.maintainers = builtins.attrValues {
-    inherit (lib.maintainers) dblsaiko h7x4;
-  };
-}

hosts/bekkalokk/services/keycloak.nix

@@ -1,24 +0,0 @@
-{ pkgs, config, values, ... }:
-{
-  sops.secrets."keys/postgres/keycloak" = {
-    owner = "keycloak";
-    group = "keycloak";
-    restartUnits = [ "keycloak.service" ];
-  };
-
-  services.keycloak = {
-    enable = true;
-
-    settings = {
-      hostname = "auth.pvv.ntnu.no";
-      # hostname-strict-backchannel = true;
-    };
-
-    database = {
-      host = values.hosts.bicep.ipv4;
-      createLocally = false;
-      passwordFile = config.sops.secrets."keys/postgres/keycloak".path;
-      caCert = "${pkgs.cacert}/etc/ssl/certs/ca-bundle.crt";
-    };
-  };
-}

hosts/bekkalokk/services/mediawiki/default.nix

@@ -1,4 +1,4 @@
-{ pkgs, lib, config, values, pkgs-unstable, ... }: let
+{ pkgs, lib, fp, config, values, pkgs-unstable, ... }: let
   cfg = config.services.mediawiki;
 
   # "mediawiki"
@@ -17,16 +17,16 @@
         cp ${./simplesaml-config.php} "$out"
 
         substituteInPlace "$out" \
-          --replace '$SAML_COOKIE_SECURE' 'true' \
+          --replace-warn '$SAML_COOKIE_SECURE' 'true' \
-          --replace '$SAML_COOKIE_SALT' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/cookie_salt".path}")' \
+          --replace-warn '$SAML_COOKIE_SALT' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/cookie_salt".path}")' \
-          --replace '$SAML_ADMIN_NAME' '"Drift"' \
+          --replace-warn '$SAML_ADMIN_NAME' '"Drift"' \
-          --replace '$SAML_ADMIN_EMAIL' '"drift@pvv.ntnu.no"' \
+          --replace-warn '$SAML_ADMIN_EMAIL' '"drift@pvv.ntnu.no"' \
-          --replace '$SAML_ADMIN_PASSWORD' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/admin_password".path}")' \
+          --replace-warn '$SAML_ADMIN_PASSWORD' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/admin_password".path}")' \
-          --replace '$SAML_TRUSTED_DOMAINS' 'array( "wiki.pvv.ntnu.no" )' \
+          --replace-warn '$SAML_TRUSTED_DOMAINS' 'array( "wiki.pvv.ntnu.no" )' \
-          --replace '$SAML_DATABASE_DSN' '"pgsql:host=postgres.pvv.ntnu.no;port=5432;dbname=mediawiki_simplesamlphp"' \
+          --replace-warn '$SAML_DATABASE_DSN' '"pgsql:host=postgres.pvv.ntnu.no;port=5432;dbname=mediawiki_simplesamlphp"' \
-          --replace '$SAML_DATABASE_USERNAME' '"mediawiki_simplesamlphp"' \
+          --replace-warn '$SAML_DATABASE_USERNAME' '"mediawiki_simplesamlphp"' \
-          --replace '$SAML_DATABASE_PASSWORD' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/postgres_password".path}")' \
+          --replace-warn '$SAML_DATABASE_PASSWORD' 'file_get_contents("${config.sops.secrets."mediawiki/simplesamlphp/postgres_password".path}")' \
-          --replace '$CACHE_DIRECTORY' '/var/cache/mediawiki/idp'
+          --replace-warn '$CACHE_DIRECTORY' '/var/cache/mediawiki/idp'
       '';
     };
   };
@@ -61,7 +61,6 @@ in {
       user = "mediawiki";
       passwordFile = config.sops.secrets."mediawiki/postgres_password".path;
       createLocally = false;
-      # TODO: create a normal database and copy over old data when the service is production ready
       name = "mediawiki";
     };
 
@@ -86,7 +85,20 @@ in {
     };
 
     extensions = {
-      inherit (pkgs.mediawiki-extensions) DeleteBatch UserMerge PluggableAuth SimpleSAMLphp VisualEditor;
+      inherit (pkgs.mediawiki-extensions)
+        CodeEditor
+        CodeMirror
+        DeleteBatch
+        PluggableAuth
+        Popups
+        Scribunto
+        SimpleSAMLphp
+        TemplateData
+        TemplateStyles
+        UserMerge
+        VisualEditor
+        WikiEditor
+        ;
     };
 
     extraConfig = ''
@@ -118,15 +130,35 @@ in {
       $wgVectorDefaultSidebarVisibleForAnonymousUser = true;
       $wgVectorResponsive = true;
 
+      # Experimental dark mode support for Vector 2022
+      $wgVectorNightMode['beta'] = true;
+      $wgVectorNightMode['logged_out'] = true;
+      $wgVectorNightMode['logged_in'] = true;
+      $wgDefaultUserOptions['vector-theme'] = 'os';
+
       # Misc
       $wgEmergencyContact = "${cfg.passwordSender}";
-      $wgShowIPinHeader = false;
       $wgUseTeX = false;
       $wgLocalInterwiki = $wgSitename;
+      # Fix https://github.com/NixOS/nixpkgs/issues/183097
+      $wgDBserver = "${toString cfg.database.host}";
+      $wgAllowCopyUploads = true;
 
-      # SimpleSAML
+      # Misc program paths
+      $wgFFmpegLocation = '${pkgs.ffmpeg}/bin/ffmpeg';
+      $wgExiftool = '${pkgs.exiftool}/bin/exiftool';
+      $wgExiv2Command = '${pkgs.exiv2}/bin/exiv2';
+      # See https://gist.github.com/sergejmueller/088dce028b6dd120a16e
+      $wgJpegTran = '${pkgs.mozjpeg}/bin/jpegtran';
+      $wgGitBin = '${pkgs.git}/bin/git';
+
+      # Debugging
+      $wgShowExceptionDetails = false;
+      $wgShowIPinHeader = false;
+
+      # EXT:{SimpleSAML,PluggableAuth}
       $wgSimpleSAMLphp_InstallDir = "${simplesamlphp}/share/php/simplesamlphp/";
-      $wgPluggableAuth_Config['Log in using my SAML'] = [
+      $wgPluggableAuth_Config['Log in using SAML'] = [
         'plugin' => 'SimpleSAMLphp',
         'data' => [
           'authSourceId' => 'default-sp',
@@ -136,8 +168,12 @@ in {
         ]
       ];
 
-      # Fix https://github.com/NixOS/nixpkgs/issues/183097
+      # EXT:Scribunto
-      $wgDBserver = "${toString cfg.database.host}";
+      $wgScribuntoDefaultEngine = 'luastandalone';
+      $wgScribuntoEngineConf['luastandalone']['luaPath'] = '${pkgs.lua}/bin';
+
+      # EXT:WikiEditor
+      $wgWikiEditorRealtimePreview = true;
     '';
   };
 
@@ -179,16 +215,16 @@ in {
         '';
       };
 
-      "= /PNG/PVV-logo.svg".alias = ../../../../assets/logo_blue_regular.svg;
+      "= /PNG/PVV-logo.svg".alias = fp /assets/logo_blue_regular.svg;
-      "= /PNG/PVV-logo.png".alias = ../../../../assets/logo_blue_regular.png;
+      "= /PNG/PVV-logo.png".alias = fp /assets/logo_blue_regular.png;
       "= /favicon.ico".alias = pkgs.runCommandLocal "mediawiki-favicon.ico" {
         buildInputs = with pkgs; [ imagemagick ];
       } ''
-        convert \
+        magick \
+          ${fp /assets/logo_blue_regular.png} \
           -resize x64 \
           -gravity center \
           -crop 64x64+0+0 \
-          ${../../../../assets/logo_blue_regular.png} \
           -flatten \
           -colors 256 \
           -background transparent \

hosts/bekkalokk/services/phpfpm.nix

@@ -0,0 +1,51 @@
+{ lib, ... }:
+let
+  pools = map (pool: "phpfpm-${pool}") [
+    "idp"
+    "mediawiki"
+    "pvv-nettsiden"
+    "roundcube"
+    "snappymail"
+  ];
+in
+{
+  # Source: https://www.pierreblazquez.com/2023/06/17/how-to-harden-apache-php-fpm-daemons-using-systemd/
+  systemd.services = lib.genAttrs pools (_: {
+    serviceConfig = let
+      caps = [
+        "CAP_NET_BIND_SERVICE"
+        "CAP_SETGID"
+        "CAP_SETUID"
+        "CAP_CHOWN"
+        "CAP_KILL"
+        "CAP_IPC_LOCK"
+        "CAP_DAC_OVERRIDE"
+      ];
+    in {
+      AmbientCapabilities = caps;
+      CapabilityBoundingSet = caps;
+      DeviceAllow = [ "" ];
+      LockPersonality = true;
+      MemoryDenyWriteExecute = false;
+      NoNewPrivileges = true;
+      PrivateMounts = true;
+      ProtectClock = true;
+      ProtectControlGroups = true;
+      ProtectHome = true;
+      ProtectHostname = true;
+      ProtectKernelLogs = true;
+      ProtectKernelModules = true;
+      ProtectKernelTunables = true;
+      RemoveIPC = true;
+      UMask = "0077";
+      RestrictNamespaces = "~mnt";
+      RestrictRealtime = true;
+      RestrictSUIDSGID = true;
+      SystemCallArchitectures = "native";
+      KeyringMode = "private";
+      SystemCallFilter = [
+        "@system-service"
+      ];
+    };
+  });
+}

hosts/bekkalokk/services/vaultwarden.nix

@@ -0,0 +1,102 @@
+{ config, pkgs, lib, ... }:
+let
+  cfg = config.services.vaultwarden;
+  domain = "pw.pvv.ntnu.no";
+  address = "127.0.1.2";
+  port = 3011;
+  wsPort = 3012;
+in {
+  sops.secrets."vaultwarden/environ" = {
+    owner = "vaultwarden";
+    group = "vaultwarden";
+  };
+
+  services.vaultwarden = {
+    enable = true;
+    dbBackend = "postgresql";
+    environmentFile = config.sops.secrets."vaultwarden/environ".path;
+    config = {
+      domain = "https://${domain}";
+
+      rocketAddress = address;
+      rocketPort = port;
+
+      websocketEnabled = true;
+      websocketAddress = address;
+      websocketPort = wsPort;
+
+      signupsAllowed = true;
+      signupsVerify = true;
+      signupsDomainsWhitelist = "pvv.ntnu.no";
+
+      smtpFrom = "vaultwarden@pvv.ntnu.no";
+      smtpFromName = "VaultWarden PVV";
+
+      smtpHost = "smtp.pvv.ntnu.no";
+      smtpUsername = "vaultwarden";
+      smtpSecurity = "force_tls";
+      smtpAuthMechanism = "Login";
+
+      # Configured in environ:
+      # databaseUrl = "postgresql://vaultwarden@/vaultwarden";
+      # smtpPassword = hemli
+    };
+  };
+
+  services.nginx.virtualHosts."${domain}" = {
+    forceSSL = true;
+    enableACME = true;
+    kTLS = true;
+
+    extraConfig = ''
+      client_max_body_size 128M;
+    '';
+
+    locations."/" = {
+      proxyPass = "http://${address}:${toString port}";
+      proxyWebsockets = true;
+    };
+    locations."/notifications/hub" = {
+      proxyPass = "http://${address}:${toString wsPort}";
+      proxyWebsockets = true;
+    };
+    locations."/notifications/hub/negotiate" = {
+      proxyPass = "http://${address}:${toString port}";
+      proxyWebsockets = true;
+    };
+  };
+
+  systemd.services.vaultwarden = lib.mkIf cfg.enable {
+    serviceConfig = {
+      AmbientCapabilities = [ "" ];
+      CapabilityBoundingSet = [ "" ];
+      DeviceAllow = [ "" ];
+      LockPersonality = true;
+      NoNewPrivileges = true;
+      # MemoryDenyWriteExecute = true;
+      PrivateMounts = true;
+      PrivateUsers = true;
+      ProcSubset = "pid";
+      ProtectClock = true;
+      ProtectControlGroups = true;
+      ProtectHostname = true;
+      ProtectKernelLogs = true;
+      ProtectKernelModules = true;
+      ProtectKernelTunables = true;
+      RestrictAddressFamilies = [
+        "AF_INET"
+        "AF_INET6"
+        "AF_UNIX"
+      ];
+      RemoveIPC = true;
+      RestrictNamespaces = true;
+      RestrictRealtime = true;
+      RestrictSUIDSGID = true;
+      SystemCallArchitectures = "native";
+      SystemCallFilter = [
+        "@system-service"
+        "~@privileged"
+      ];
+    };
+  };
+}

hosts/bekkalokk/services/webmail/default.nix

@@ -2,6 +2,7 @@
 {
   imports = [
     ./roundcube.nix
+    ./snappymail.nix
   ];
 
   services.nginx.virtualHosts."webmail.pvv.ntnu.no" = {
@@ -10,9 +11,11 @@
     kTLS = true;
     locations = {
       "= /".return = "302 https://webmail.pvv.ntnu.no/roundcube";
+
       "/afterlogic_lite".return = "302 https://webmail.pvv.ntnu.no/roundcube";
       "/squirrelmail".return = "302 https://webmail.pvv.ntnu.no/roundcube";
-      "/rainloop".return = "302 https://webmail.pvv.ntnu.no/roundcube";
+      "/rainloop".return = "302 https://snappymail.pvv.ntnu.no/";
+      "/snappymail".return = "302 https://snappymail.pvv.ntnu.no/";
     };
   };
 }

hosts/bekkalokk/services/webmail/roundcube.nix

@@ -6,6 +6,11 @@ let
   domain = "webmail.pvv.ntnu.no";
 in
 {
+  sops.secrets."roundcube/postgres_password" = {
+    owner = "nginx";
+    group = "nginx";
+  };
+
   services.roundcube = {
     enable = true;
 
@@ -16,10 +21,15 @@ in
       custom_from
     ]);
 
-    dicts = with pkgs.aspellDicts; [ en en-science en-computers nb nn fr de it ];
+    dicts = with pkgs.aspellDicts; [ en en-computers nb nn fr de it ];
     maxAttachmentSize = 20;
     hostName = "roundcubeplaceholder.example.com";
 
+    database = {
+      host = "postgres.pvv.ntnu.no";
+      passwordFile = config.sops.secrets."roundcube/postgres_password".path;
+    };
+
     extraConfig = ''
       $config['enable_installer'] = false;
       $config['default_host'] = "ssl://imap.pvv.ntnu.no";

hosts/bekkalokk/services/webmail/snappymail.nix

@@ -0,0 +1,18 @@
+{ config, lib, fp, pkgs, ... }:
+let
+  cfg = config.services.snappymail;
+in {
+  imports = [ (fp /modules/snappymail.nix) ];
+
+  services.snappymail = {
+    enable = true;
+    hostname = "snappymail.pvv.ntnu.no";
+  };
+
+  services.nginx.virtualHosts.${cfg.hostname} = {
+    forceSSL = true;
+    enableACME = true;
+    kTLS = true;
+  };
+}
+

hosts/bekkalokk/services/website/default.nix

@@ -18,7 +18,17 @@ in {
     restartUnits = [ "phpfpm-pvv-nettsiden.service" ];
   });
 
-  services.idp.sp-remote-metadata = [ "https://${cfg.domainName}/simplesaml/" ];
+  security.acme.certs."www.pvv.ntnu.no" = {
+    extraDomainNames = [
+      "pvv.ntnu.no"
+      "www.pvv.org"
+      "pvv.org"
+    ];
+  };
+
+  services.idp.sp-remote-metadata = [
+    "https://www.pvv.ntnu.no/simplesaml/"
+  ];
 
   services.pvv-nettsiden = {
     enable = true;
@@ -62,7 +72,9 @@ in {
         ADMIN_NAME = "PVV Drift";
         ADMIN_EMAIL = "drift@pvv.ntnu.no";
         ADMIN_PASSWORD = includeFromSops "simplesamlphp/admin_password";
-        TRUSTED_DOMAINS = [ cfg.domainName ];
+        TRUSTED_DOMAINS = [
+          "www.pvv.ntnu.no"
+        ];
       };
     };
   };
@@ -73,13 +85,28 @@ in {
     "catch_workers_output" = true;
   };
 
-  services.nginx.virtualHosts.${cfg.domainName} = {
+  services.nginx.virtualHosts."pvv.ntnu.no" = {
-    serverAliases = [
+    globalRedirect = cfg.domainName;
-      "pvv.ntnu.no"
+    redirectCode = 307;
-      "www.pvv.org"
+    forceSSL = true;
-      "pvv.org"
+    useACMEHost = "www.pvv.ntnu.no";
-    ];
+  };
 
+  services.nginx.virtualHosts."www.pvv.org" = {
+    globalRedirect = cfg.domainName;
+    redirectCode = 307;
+    forceSSL = true;
+    useACMEHost = "www.pvv.ntnu.no";
+  };
+
+  services.nginx.virtualHosts."pvv.org" = {
+    globalRedirect = cfg.domainName;
+    redirectCode = 307;
+    forceSSL = true;
+    useACMEHost = "www.pvv.ntnu.no";
+  };
+
+  services.nginx.virtualHosts.${cfg.domainName} = {
     locations = {
       # Proxy home directories
       "^~ /~" = {
@@ -111,16 +138,6 @@ in {
       "/drift".return = "301 https://wiki.pvv.ntnu.no/wiki/Drift";
       "/diverse/abuse.php".return = "301 https://wiki.pvv.ntnu.no/wiki/CERT/Abuse";
       "/nerds/".return = "301 https://wiki.pvv.ntnu.no/wiki/Nerdepizza";
-
-      # Proxy the matrix well-known files
-      # Host has be set before proxy_pass
-      # The header must be set so nginx on the other side routes it to the right place
-      "^~ /.well-known/matrix/" = {
-        extraConfig = ''
-          proxy_set_header Host matrix.pvv.ntnu.no;
-          proxy_pass https://matrix.pvv.ntnu.no/.well-known/matrix/;
-        '';
-      };
     };
   };
 }

hosts/bekkalokk/services/website/fetch-gallery.nix

@@ -34,8 +34,8 @@ in {
       # Delete files and directories that exists in the gallery that don't exist in the tarball
       filesToRemove=$(uniq -u <(sort <(find . -not -path "./.thumbnails*") <(tar -tf ${transferDir}/gallery.tar.gz | sed 's|/$||')))
       while IFS= read fname; do
-        rm -f $fname ||:
+        rm -f "$fname" ||:
-        rm -f .thumbnails/$fname.png ||:
+        rm -f ".thumbnails/$fname.png" ||:
       done <<< "$filesToRemove"
 
       find . -type d -empty -delete
@@ -44,11 +44,17 @@ in {
       images=$(find . -type f -not -path "./.thumbnails*")
 
       while IFS= read fname; do
-        [ -f ".thumbnails/$fname.png" ] && continue ||:
+        # Skip this file if an up-to-date thumbnail already exists
+        if [ -f ".thumbnails/$fname.png" ] && \
+          [ "$(date -R -r "$fname")" == "$(date -R -r ".thumbnails/$fname.png")" ]
+        then
+          continue
+        fi
 
         echo "Creating thumbnail for $fname"
         mkdir -p $(dirname ".thumbnails/$fname")
-        convert -define jpeg:size=200x200 "$fname" -thumbnail 500 -auto-orient ".thumbnails/$fname.png" ||:
+        magick -define jpeg:size=200x200 "$fname" -thumbnail 300 -auto-orient ".thumbnails/$fname.png" ||:
+        touch -m -d "$(date -R -r "$fname")" ".thumbnails/$fname.png"
       done <<< "$images"
     '';
 
@@ -56,6 +62,33 @@ in {
       WorkingDirectory = galleryDir;
       User = config.services.pvv-nettsiden.user;
       Group = config.services.pvv-nettsiden.group;
+
+      AmbientCapabilities = [ "" ];
+      CapabilityBoundingSet = [ "" ];
+      DeviceAllow = [ "" ];
+      LockPersonality = true;
+      MemoryDenyWriteExecute = true;
+      NoNewPrivileges = true; # disable for third party rotate scripts
+      PrivateDevices = true;
+      PrivateNetwork = true; # disable for mail delivery
+      PrivateTmp = true;
+      ProtectClock = true;
+      ProtectControlGroups = true;
+      ProtectHome = true; # disable for userdir logs
+      ProtectHostname = true;
+      ProtectKernelLogs = true;
+      ProtectKernelModules = true;
+      ProtectKernelTunables = true;
+      ProtectProc = "invisible";
+      ProtectSystem = "full";
+      RestrictNamespaces = true;
+      RestrictRealtime = true;
+      RestrictSUIDSGID = true; # disable for creating setgid directories
+      SocketBindDeny = [ "any" ];
+      SystemCallArchitectures = "native";
+      SystemCallFilter = [
+        "@system-service"
+      ];
     };
   };
 }

hosts/bekkalokk/services/well-known/default.nix

@@ -0,0 +1,18 @@
+{ ... }:
+{
+  services.nginx.virtualHosts."www.pvv.ntnu.no".locations = {
+    "^~ /.well-known/" = {
+      alias = (toString ./root) + "/";
+    };
+
+    # Proxy the matrix well-known files
+    # Host has be set before proxy_pass
+    # The header must be set so nginx on the other side routes it to the right place
+    "^~ /.well-known/matrix/" = {
+      extraConfig = ''
+        proxy_set_header Host matrix.pvv.ntnu.no;
+        proxy_pass https://matrix.pvv.ntnu.no/.well-known/matrix/;
+      '';
+    };
+  };
+}

hosts/bekkalokk/services/well-known/root/autoconfig/mail/config-v1.1.xml

@@ -0,0 +1,31 @@
+<?xml version="1.0"?>
+<clientConfig version="1.1">
+  <emailProvider id="pvv.ntnu.no">
+    <domain>pvv.ntnu.no</domain>
+    <domain>pvv.org</domain>
+
+    <displayName>Programvareverkstedet</displayName>
+
+    <incomingServer type="imap">
+      <hostname>imap.pvv.ntnu.no</hostname>
+      <port>993</port>
+      <socketType>SSL</socketType>
+      <username>%EMAILLOCALPART%</username>
+      <authentication>password-cleartext</authentication>
+    </incomingServer>
+
+    <outgoingServer type="smtp">
+      <hostname>smtp.pvv.ntnu.no</hostname>
+      <port>587</port>
+      <socketType>STARTTLS</socketType>
+      <username>%EMAILLOCALPART%</username>
+      <authentication>password-cleartext</authentication>
+      <useGlobalPreferredServer>true</useGlobalPreferredServer>
+    </outgoingServer>
+
+    <documentation url="https://www.pvv.ntnu.no/pvv/Drift/Mail/IMAP_POP3">
+       <descr lang="en">Setup programvareverkstedet email user with IMAP or POP3</descr>
+       <descr lang="nb">Sett opp programvareverkstedet email bruker med IMAP eller POP3</descr>
+    </documentation>
+  </emailProvider>
+</clientConfig>

hosts/bekkalokk/services/well-known/root/security.txt

@@ -0,0 +1,12 @@
+Contact: mailto:drift@pvv.ntnu.no
+Contact: mailto:cert@pvv.ntnu.no
+# drift@pvv.ntnu.no is read by more people and have a quicker reaction time,
+# but cert@pvv.ntnu.no can be used for more severe issues.
+
+Preferred-Languages: no, en
+
+Expires: 2032-12-31T23:59:59.000Z
+# This file was last updated 2024-09-14.
+
+# You can find a wikipage for our security policies at:
+# https://wiki.pvv.ntnu.no/wiki/CERT

hosts/bicep/acmeCert.nix

@@ -1,24 +0,0 @@
-{ values, ... }:
-{
-  users.groups.acme.members = [ "nginx" ];
-
-  security.acme.certs."postgres.pvv.ntnu.no" = {
-    group = "acme";
-    extraDomainNames = [
-      # "postgres.pvv.org"
-      "bicep.pvv.ntnu.no"
-      # "bicep.pvv.org"
-      # values.hosts.bicep.ipv4
-      # values.hosts.bicep.ipv6
-    ];
-  };
-
-  services.nginx = {
-    enable = true;
-    virtualHosts."postgres.pvv.ntnu.no" = {
-      forceSSL = true;
-      enableACME = true;
-      # useACMEHost = "postgres.pvv.ntnu.no";
-    };
-  };
-}

hosts/bicep/configuration.nix

@@ -1,35 +1,34 @@
-{ pkgs, values, ... }:
+{ fp, pkgs, values, ... }:
 {
   imports = [
     ./hardware-configuration.nix
 
-    ../../base.nix
+    (fp /base)
-    ../../misc/metrics-exporters.nix
     ./services/nginx
 
-    ./acmeCert.nix
+    ./services/calendar-bot.nix
-
+    #./services/git-mirrors
+    ./services/minecraft-heatmap.nix
     ./services/mysql.nix
     ./services/postgres.nix
-    ./services/mysql.nix
-    # TODO: fix the calendar bot
-    # ./services/calendar-bot.nix
 
     ./services/matrix
   ];
 
-  sops.defaultSopsFile = ../../secrets/bicep/bicep.yaml;
+  sops.defaultSopsFile = fp /secrets/bicep/bicep.yaml;
   sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
   sops.age.keyFile = "/var/lib/sops-nix/key.txt";
   sops.age.generateKey = true;
 
-  boot.loader.grub.enable = true;
+  boot.loader.systemd-boot.enable = true;
-  boot.loader.grub.device = "/dev/disk/by-id/scsi-3600508b1001cb1a8751c137b30610682";
+  boot.loader.efi.canTouchEfiVariables = true;
 
   networking.hostName = "bicep";
 
-  systemd.network.networks."30-enp6s0f0" = values.defaultNetworkConfig // {
+  #systemd.network.networks."30-enp6s0f0" = values.defaultNetworkConfig // {
-    matchConfig.Name = "enp6s0f0";
+  systemd.network.networks."30-ens18" = values.defaultNetworkConfig // {
+    #matchConfig.Name = "enp6s0f0";
+    matchConfig.Name = "ens18";
     address = with values.hosts.bicep; [ (ipv4 + "/25") (ipv6 + "/64") ]
       ++ (with values.services.turn; [ (ipv4 + "/25") (ipv6 + "/64") ]);
   };
@@ -37,6 +36,16 @@
     anyInterface = true;
   };
 
+  # There are no smart devices
+  services.smartd.enable = false;
+
+  # we are a vm now
+  services.qemuGuest.enable = true;
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.sshguard.enable = true;
+
   # Do not change, even during upgrades.
   # See https://search.nixos.org/options?show=system.stateVersion
   system.stateVersion = "22.11";

hosts/bicep/hardware-configuration.nix

@@ -5,22 +5,29 @@
 
 {
   imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
+    [ (modulesPath + "/profiles/qemu-guest.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "uhci_hcd" "ehci_pci" "hpsa" "ohci_pci" "usbhid" "sd_mod" ];
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "ahci" "sd_mod" "sr_mod" ];
   boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-intel" ];
+  boot.kernelModules = [ ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" =
-    { device = "/dev/disk/by-uuid/31a67903-dc00-448a-a24a-36e820318fe5";
+    { device = "/dev/disk/by-uuid/20e06202-7a09-47cc-8ef6-5e7afe19453a";
       fsType = "ext4";
     };
 
+  # temp data disk, only 128gb not enough until we can add another disk to the system.
   fileSystems."/data" =
-    { device = "/dev/disk/by-uuid/79e93eed-ad95-45c9-b115-4ef92afcc8c0";
+    { device = "/dev/disk/by-uuid/c81af266-0781-4084-b8eb-c2587cbcf1ba";
-      fsType = "f2fs";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/198B-E363";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
     };
 
   swapDevices = [ ];
@@ -30,11 +37,7 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f1.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f2.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f3.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }

hosts/bicep/services/calendar-bot.nix

@@ -1,13 +1,21 @@
-{ config, lib, pkgs, ... }:
+{ config, fp, lib, pkgs, ... }:
 let
   cfg = config.services.pvv-calendar-bot;
 in {
-  sops.secrets."calendar-bot/matrix_token" = {
+  sops.secrets = {
-    sopsFile = ../../../secrets/bicep/bicep.yaml;
+    "calendar-bot/matrix_token" = {
+      sopsFile = fp /secrets/bicep/bicep.yaml;
       key = "calendar-bot/matrix_token";
       owner = cfg.user;
       group = cfg.group;
     };
+    "calendar-bot/mysql_password" = {
+      sopsFile = fp /secrets/bicep/bicep.yaml;
+      key = "calendar-bot/mysql_password";
+      owner = cfg.user;
+      group = cfg.group;
+    };
+  };
 
   services.pvv-calendar-bot = {
     enable = true;
@@ -18,6 +26,11 @@ in {
         user = "@bot_calendar:pvv.ntnu.no";
         channel = "!gkNLUIhYVpEyLatcRz:pvv.ntnu.no";
       };
+      database = {
+        host = "mysql.pvv.ntnu.no";
+        user = "calendar-bot";
+        passwordFile = config.sops.secrets."calendar-bot/mysql_password".path;
+      };
       secretsFile = config.sops.secrets."calendar-bot/matrix_token".path;
       onCalendar = "*-*-* 09:00:00";
     };

hosts/bicep/services/git-mirrors/default.nix

@@ -0,0 +1,100 @@
+{ config, pkgs, lib, fp, ... }:
+let
+  cfg = config.services.gickup;
+in
+{
+  sops.secrets."gickup/github-token" = {
+    owner = "gickup";
+  };
+
+  services.gickup = {
+    enable = true;
+
+    dataDir = "/data/gickup";
+
+    destinationSettings = {
+      structured = true;
+      zip = false;
+      keep = 10;
+      bare = true;
+      lfs = false;
+    };
+
+    instances = let
+      defaultGithubConfig = {
+        settings.token_file = config.sops.secrets."gickup/github-token".path;
+      };
+      defaultGitlabConfig = {
+        # settings.token_file = ...
+      };
+    in {
+      "github:Git-Mediawiki/Git-Mediawiki" = defaultGithubConfig;
+      "github:NixOS/nixpkgs" = defaultGithubConfig;
+      "github:go-gitea/gitea" = defaultGithubConfig;
+      "github:heimdal/heimdal" = defaultGithubConfig;
+      "github:saltstack/salt" = defaultGithubConfig;
+      "github:typst/typst" = defaultGithubConfig;
+      "github:unmojang/FjordLauncher" = defaultGithubConfig;
+      "github:unmojang/drasl" = defaultGithubConfig;
+      "github:yushijinhun/authlib-injector" = defaultGithubConfig;
+
+      "gitlab:mx-puppet/discord/better-discord.js" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/discord-markdown" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/matrix-discord-parser" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/mx-puppet-discord" = defaultGitlabConfig;
+      "gitlab:mx-puppet/mx-puppet-bridge" = defaultGitlabConfig;
+
+      "any:glibc" = {
+        settings.url = "https://sourceware.org/git/glibc.git";
+      };
+
+      "any:out-of-your-element" = {
+        settings.url = "https://gitdab.com/cadence/out-of-your-element.git";
+      };
+
+      "any:out-of-your-element-module" = {
+        settings.url = "https://cgit.rory.gay/nix/OOYE-module.git";
+      };
+    };
+  };
+
+  services.cgit = let
+    domain = "mirrors.pvv.ntnu.no";
+  in {
+    ${domain} = {
+      enable = true;
+      package = pkgs.callPackage (fp /packages/cgit.nix) { };
+      group = "gickup";
+      scanPath = "${cfg.dataDir}/linktree";
+      settings = {
+        enable-commit-graph = true;
+        enable-follow-links = true;
+        enable-http-clone = true;
+        enable-remote-branches = true;
+        clone-url = "https://${domain}/$CGIT_REPO_URL";
+        remove-suffix = true;
+        root-title = "PVVSPPP";
+        root-desc = "PVV Speiler Praktisk og Prominent Programvare";
+        snapshots = "all";
+        logo = "/PVV-logo.png";
+      };
+    };
+  };
+
+  services.nginx.virtualHosts."mirrors.pvv.ntnu.no" = {
+    forceSSL = true;
+    enableACME = true;
+
+    locations."= /PVV-logo.png".alias = let
+      small-pvv-logo = pkgs.runCommandLocal "pvv-logo-96x96" {
+        nativeBuildInputs = [ pkgs.imagemagick ];
+      } ''
+        magick '${fp /assets/logo_blue_regular.svg}' -resize 96x96 PNG:"$out"
+      '';
+    in toString small-pvv-logo;
+  };
+
+  systemd.services."fcgiwrap-cgit-mirrors.pvv.ntnu.no" = {
+    serviceConfig.BindReadOnlyPaths = [ cfg.dataDir ];
+  };
+}

hosts/bicep/services/matrix/coturn.nix

@@ -1,17 +1,19 @@
-{ config, lib, pkgs, secrets, ... }:
+{ config, lib, fp, pkgs, secrets, values, ... }:
 
 {
   sops.secrets."matrix/synapse/turnconfig" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
     key = "synapse/turnconfig";
     owner = config.users.users.matrix-synapse.name;
     group = config.users.users.matrix-synapse.group;
+    restartUnits = [ "coturn.service" ];
   };
   sops.secrets."matrix/coturn/static-auth-secret" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
     key = "coturn/static-auth-secret";
     owner = config.users.users.turnserver.name;
     group = config.users.users.turnserver.group;
+    restartUnits = [ "coturn.service" ];
   };
 
   services.matrix-synapse-next = {
@@ -42,12 +44,15 @@
 
   security.acme.certs.${config.services.coturn.realm} = {
     email = "drift@pvv.ntnu.no";
-    listenHTTP = "129.241.210.213:80";
+    listenHTTP = "${values.services.turn.ipv4}:80";
     reloadServices = [ "coturn.service" ];
   };
 
   users.users.turnserver.extraGroups = [ "acme" ];
 
+  # It needs this to be allowed to access the files with the acme group
+  systemd.services.coturn.serviceConfig.PrivateUsers = lib.mkForce false;
+
   systemd.services."acme-${config.services.coturn.realm}".serviceConfig = {
     AmbientCapabilities = [ "CAP_NET_BIND_SERVICE" ];
   };
@@ -60,12 +65,14 @@
     pkey = "${config.security.acme.certs.${realm}.directory}/key.pem";
 
     use-auth-secret = true;
-    # World readable but I  dont think it's that bad
     static-auth-secret-file = config.sops.secrets."matrix/coturn/static-auth-secret".path;
 
     secure-stun = true;
 
-    listening-ips = [ "129.241.210.213" "2001:700:300:1900::213" ];
+    listening-ips = [
+      values.services.turn.ipv4
+      values.services.turn.ipv6
+    ];
 
     tls-listening-port = 443;
     alt-tls-listening-port = 5349;

hosts/bicep/services/matrix/default.nix

@@ -9,7 +9,9 @@
     ./coturn.nix
     ./mjolnir.nix
 
-    ./discord.nix
+    # ./discord.nix
+    ./out-of-your-element.nix
+    ./hookshot
   ];
 
 

hosts/bicep/services/matrix/discord.nix

@@ -1,4 +1,4 @@
-{ config, lib, ... }:
+{ config, lib, fp, ... }:
 
 let
   cfg = config.services.mx-puppet-discord;
@@ -6,19 +6,46 @@ in
 {
   users.groups.keys-matrix-registrations = { };
 
-  sops.secrets."matrix/registrations/mx-puppet-discord" = {
+  sops.secrets."matrix/discord/as_token" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
-    key = "registrations/mx-puppet-discord";
+    key = "discord/as_token";
+  };
+  sops.secrets."matrix/discord/hs_token" = {
+    sopsFile = fp /secrets/bicep/matrix.yaml;
+    key = "discord/hs_token";
+  };
+
+  sops.templates."discord-registration.yaml" = {
     owner = config.users.users.matrix-synapse.name;
     group = config.users.groups.keys-matrix-registrations.name;
+    content = ''
+      as_token: "${config.sops.placeholder."matrix/discord/as_token"}"
+      hs_token: "${config.sops.placeholder."matrix/discord/hs_token"}"
+      id: discord-puppet
+      namespaces:
+        users:
+          - exclusive: true
+            regex: '@_discordpuppet_.*'
+        rooms: []
+        aliases:
+          - exclusive: true
+            regex: '#_discordpuppet_.*'
+      protocols: []
+      rate_limited: false
+      sender_localpart: _discordpuppet_bot
+      url: 'http://localhost:8434'
+      de.sorunome.msc2409.push_ephemeral: true
+    '';
   };
 
   systemd.services.mx-puppet-discord = {
-    serviceConfig.SupplementaryGroups = [ config.users.groups.keys-matrix-registrations.name ];
+    serviceConfig.SupplementaryGroups = [
+      config.users.groups.keys-matrix-registrations.name
+    ];
   };
 
 
-  services.mx-puppet-discord.enable = true;
+  services.mx-puppet-discord.enable = false;
   services.mx-puppet-discord.settings = {
     bridge = {
       bindAddress = "localhost";
@@ -29,11 +56,16 @@ in
     relay.whitelist = [ ".*" ];
     selfService.whitelist = [ "@danio:pvv\\.ntnu\\.no" "@dandellion:dodsorf\\.as" ];
   };
-  services.mx-puppet-discord.serviceDependencies = [ "matrix-synapse.target" "nginx.service" ];
+  services.mx-puppet-discord.serviceDependencies = [
+    "matrix-synapse.target"
+    "nginx.service"
+  ];
 
 
   services.matrix-synapse-next.settings = {
-    app_service_config_files = [ config.sops.secrets."matrix/registrations/mx-puppet-discord".path ];
+    app_service_config_files = [
+      config.sops.templates."discord-registration.yaml".path
+    ];
     use_appservice_legacy_authorization = true;
   };
 

hosts/bicep/services/matrix/hookshot/default.nix

@@ -0,0 +1,142 @@
+{ config, lib, fp, unstablePkgs, inputs, ... }:
+
+let
+  cfg = config.services.matrix-hookshot;
+  webhookListenAddress = "127.0.0.1";
+  webhookListenPort = 8435;
+in
+{
+  sops.secrets."matrix/hookshot/as_token" = {
+    sopsFile = fp /secrets/bicep/matrix.yaml;
+    key = "hookshot/as_token";
+  };
+  sops.secrets."matrix/hookshot/hs_token" = {
+    sopsFile = fp /secrets/bicep/matrix.yaml;
+    key = "hookshot/hs_token";
+  };
+
+  sops.templates."hookshot-registration.yaml" = {
+    owner = config.users.users.matrix-synapse.name;
+    group = config.users.groups.keys-matrix-registrations.name;
+    restartUnits = [ "matrix-hookshot.service" ];
+    content = ''
+      id: matrix-hookshot
+      as_token: "${config.sops.placeholder."matrix/hookshot/as_token"}"
+      hs_token: "${config.sops.placeholder."matrix/hookshot/hs_token"}"
+      namespaces:
+        rooms: []
+        users:
+          - regex: "@_webhooks_.*:pvv.ntnu.no"
+            exclusive: true
+          - regex: "@bot_feeds:pvv.ntnu.no"
+            exclusive: true
+        aliases: []
+
+      sender_localpart: hookshot
+      url: "http://${cfg.settings.bridge.bindAddress}:${toString cfg.settings.bridge.port}"
+      rate_limited: false
+
+      # If enabling encryption
+      de.sorunome.msc2409.push_ephemeral: true
+      push_ephemeral: true
+      org.matrix.msc3202: true
+    '';
+  };
+
+  systemd.services.matrix-hookshot = {
+    serviceConfig.SupplementaryGroups = [
+      config.users.groups.keys-matrix-registrations.name
+    ];
+  };
+
+  services.matrix-hookshot = {
+    enable = true;
+    package = unstablePkgs.matrix-hookshot;
+    registrationFile = config.sops.templates."hookshot-registration.yaml".path;
+    settings = {
+      bridge = {
+        bindAddress = "127.0.0.1";
+        domain = "pvv.ntnu.no";
+        url = "https://matrix.pvv.ntnu.no";
+        mediaUrl = "https://matrix.pvv.ntnu.no";
+        port = 9993;
+      };
+      listeners = [
+        {
+          bindAddress = webhookListenAddress;
+          port = webhookListenPort;
+          resources = [
+            "webhooks"
+            # "metrics"
+            # "provisioning"
+            "widgets"
+          ];
+        }
+      ];
+      generic = {
+        enabled = true;
+        outbound = true;
+        urlPrefix = "https://hookshot.pvv.ntnu.no/webhook/";
+        userIdPrefix = "_webhooks_";
+        allowJsTransformationFunctions = true;
+        waitForComplete = false;
+      };
+      feeds = {
+        enabled = true;
+        pollIntervalSeconds = 600;
+      };
+
+      serviceBots = [
+        { localpart = "bot_feeds";
+          displayname = "Aya";
+          avatar = ./feeds.png;
+          prefix = "!aya";
+          service = "feeds";
+        }
+      ];
+
+      widgets = {
+        roomSetupWidget.addOnInvite = false;
+        publicUrl = "https://hookshot.pvv.ntnu.no/widgetapi/v1/static";
+      };
+
+      permissions = [
+        # Users of the PVV Server
+        { actor = "pvv.ntnu.no";
+          services = [ { service = "*"; level = "commands"; } ];
+        }
+        # Members of Medlem space (for people with their own hs)
+        { actor = "!pZOTJQinWyyTWaeOgK:pvv.ntnu.no";
+          services = [ { service = "*"; level = "commands"; } ];
+        }
+        # Members of Drift
+        { actor = "!eYgeufLrninXxQpYml:pvv.ntnu.no";
+          services = [ { service = "*"; level = "admin"; } ];
+        }
+        # Dan bootstrap
+        { actor = "@dandellion:dodsorf.as";
+          services = [ { service = "*"; level = "admin"; } ];
+        }
+      ];
+    };
+  };
+
+  services.matrix-hookshot.serviceDependencies = [
+    "matrix-synapse.target"
+    "nginx.service"
+  ];
+
+  services.matrix-synapse-next.settings = {
+    app_service_config_files = [
+      config.sops.templates."hookshot-registration.yaml".path
+    ];
+  };
+
+  services.nginx.virtualHosts."hookshot.pvv.ntnu.no" = {
+    enableACME = true;
+    addSSL = true;
+    locations."/" = {
+      proxyPass = "http://${webhookListenAddress}:${toString webhookListenPort}";
+    };
+  };
+}

hosts/bicep/services/matrix/mjolnir.nix

@@ -1,17 +1,18 @@
-{ config, lib, ... }:
+{ config, lib, fp, ... }:
 
 {
   sops.secrets."matrix/mjolnir/access_token" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
     key = "mjolnir/access_token";
     owner = config.users.users.mjolnir.name;
     group = config.users.users.mjolnir.group;
+    restartUnits = [ "mjolnir.service" ];
   };
 
   services.mjolnir = {
     enable = true;
     pantalaimon.enable = false;
-    homeserverUrl = http://127.0.0.1:8008;
+    homeserverUrl = "https://matrix.pvv.ntnu.no";
     accessTokenFile = config.sops.secrets."matrix/mjolnir/access_token".path;
     managementRoom = "!gsdeCoWjvYRBrzuiRq:pvv.ntnu.no";
     protectedRooms = map (a: "https://matrix.to/#/${a}") [

hosts/bicep/services/matrix/out-of-your-element.nix

@@ -0,0 +1,70 @@
+{ config, pkgs, fp, ... }:
+let
+  cfg = config.services.matrix-ooye;
+in
+{
+  users.groups.keys-matrix-registrations = { };
+
+  sops.secrets = {
+    "matrix/ooye/as_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/as_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/hs_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/hs_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/discord_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/discord_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/discord_client_secret" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/discord_client_secret";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+  };
+
+  services.matrix-ooye = {
+    enable = true;
+    homeserver = "https://matrix.pvv.ntnu.no";
+    homeserverName = "pvv.ntnu.no";
+    discordTokenPath = config.sops.secrets."matrix/ooye/discord_token".path;
+    discordClientSecretPath = config.sops.secrets."matrix/ooye/discord_client_secret".path;
+    bridgeOrigin = "https://ooye.pvv.ntnu.no";
+
+    enableSynapseIntegration = false;
+  };
+
+  systemd.services."matrix-synapse" = {
+    after = [
+      "matrix-ooye-pre-start.service"
+      "network-online.target"
+    ];
+    requires = [ "matrix-ooye-pre-start.service" ];
+    serviceConfig = {
+      LoadCredential = [
+        "matrix-ooye-registration:/var/lib/matrix-ooye/registration.yaml"
+      ];
+      ExecStartPre = [
+        "+${pkgs.coreutils}/bin/cp /run/credentials/matrix-synapse.service/matrix-ooye-registration ${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+        "+${pkgs.coreutils}/bin/chown matrix-synapse:keys-matrix-registrations ${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+      ];
+    };
+  };
+
+  services.matrix-synapse-next.settings = {
+    app_service_config_files = [
+      "${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+    ];
+  };
+
+  services.nginx.virtualHosts."ooye.pvv.ntnu.no" = {
+    forceSSL = true;
+    enableACME = true;
+    locations."/".proxyPass = "http://localhost:${cfg.socket}";
+  };
+}

hosts/bicep/services/matrix/smtp-authenticator/default.nix

@@ -1,4 +1,4 @@
-{ lib, buildPythonPackage, fetchFromGitHub }:
+{ lib, buildPythonPackage, fetchFromGitHub, setuptools }:
 
 buildPythonPackage rec {
   pname = "matrix-synapse-smtp-auth";
@@ -6,6 +6,9 @@ buildPythonPackage rec {
 
   src = ./.;
 
+  pyproject = true;
+  build-system = [ setuptools ];
+
   doCheck = false;
 
   meta = with lib; {

hosts/bicep/services/matrix/smtp-authenticator/smtp_auth_provider.py

@@ -7,6 +7,9 @@ from synapse import module_api
 
 import re
 
+import logging
+logger = logging.getLogger(__name__)
+
 class SMTPAuthProvider:
     def __init__(self, config: dict, api: module_api):
         self.api = api
@@ -43,8 +46,13 @@ class SMTPAuthProvider:
 
         if result == True:
             userid = self.api.get_qualified_user_id(username)
-            if not self.api.check_user_exists(userid):
+
-                self.api.register_user(username)
+            userid = await self.api.check_user_exists(userid)
+            if not userid:
+                logger.info(f"user did not exist, registering {username}")
+                userid = await self.api.register_user(username)
+                logger.info(f"registered userid: {userid}")
             return (userid, None)
         else:
+            logger.info("returning None")
             return None

hosts/bicep/services/matrix/synapse.nix

@@ -1,4 +1,4 @@
-{ config, lib, pkgs, values, inputs, ... }:
+{ config, lib, fp, pkgs, values, inputs, ... }:
 
 let
   cfg = config.services.matrix-synapse-next;
@@ -10,23 +10,18 @@ let
 in {
   sops.secrets."matrix/synapse/signing_key" = {
     key = "synapse/signing_key";
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
     owner = config.users.users.matrix-synapse.name;
     group = config.users.users.matrix-synapse.group;
   };
 
   sops.secrets."matrix/synapse/user_registration" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
+    sopsFile = fp /secrets/bicep/matrix.yaml;
     key = "synapse/signing_key";
     owner = config.users.users.matrix-synapse.name;
     group = config.users.users.matrix-synapse.group;
   };
 
-  sops.secrets."matrix/sliding-sync/env" = {
-    sopsFile = ../../../../secrets/bicep/matrix.yaml;
-    key = "sliding-sync/env";
-  };
-
   services.matrix-synapse-next = {
     enable = true;
 
@@ -43,8 +38,6 @@ in {
     workers.eventPersisters = 2;
     workers.useUserDirectoryWorker = true;
 
-    enableSlidingSync = true;
-
     enableNginx = true;
 
     settings = {
@@ -131,96 +124,19 @@ in {
         "fec0::/10"
 
         # NTNU
-        "129.241.0.0/16"
+        values.ntnu.ipv4-space
-        "2001:700:300::/44"
+        values.ntnu.ipv6-space
       ];
-
-      saml2_config = {
-        sp_config.metadata.remote = [
-          { url = "https://idp.pvv.ntnu.no/simplesaml/saml2/idp/metadata.php"; }
-        ];
-
-        description = [ "Matrix Synapse SP" "en" ];
-        name = [ "Matrix Synapse SP" "en" ];
-
-        ui_info = {
-          display_name = [
-            {
-              lang = "en";
-              text = "PVV Matrix login";
-            }
-          ];
-          description = [
-            {
-              lang = "en";
-              text = "Matrix is a modern free and open federated chat protocol";
-            }
-          ];
-          #information_url = [
-          #  {
-          #    lang = "en";
-          #    text = "";
-          #  };
-          #];
-          #privacy_statement_url = [
-          #  {
-          #    lang = "en";
-          #    text = "";
-          #  };
-          #];
-          keywords = [
-            {
-              lang = "en";
-              text = [ "Matrix" "Element" ];
-            }
-          ];
-          #logo = [
-          #  {
-          #    lang = "en";
-          #    text = "";
-          #    width = "";
-          #    height = "";
-          #  }
-          #];
-        };
-
-        organization = {
-          name = "Programvareverkstedet";
-          display_name = [ "Programvareverkstedet" "en" ];
-          url = "https://www.pvv.ntnu.no";
-        };
-        contact_person = [
-          { given_name = "Drift";
-            sur_name = "King";
-            email_adress = [ "drift@pvv.ntnu.no" ];
-            contact_type = "technical";
-          }
-        ];
-
-        user_mapping_provider = {
-          config = {
-            mxid_source_attribute =  "uid"; # What is this supposed to be?
-            mxid_mapping = "hexencode";
     };
   };
 
-        #attribute_requirements = [
-        #  {attribute = "userGroup"; value = "medlem";} # Do we have this?
-        #];
-      };
-    };
-  };
-
-  services.matrix-synapse.sliding-sync.environmentFile = config.sops.secrets."matrix/sliding-sync/env".path;
-
-
   services.redis.servers."".enable = true;
 
   services.nginx.virtualHosts."matrix.pvv.ntnu.no" = lib.mkMerge [
-  ({
+  {
     kTLS = true;
-  })
+  }
-  ({
+  {
     locations."/.well-known/matrix/server" = {
       return = ''
         200 '{"m.server": "matrix.pvv.ntnu.no:443"}'
@@ -230,26 +146,38 @@ in {
         add_header Access-Control-Allow-Origin *;
       '';
     };
-  })
+  }
-  ({
+  {
+    locations."/_synapse/admin" = {
+      proxyPass = "http://$synapse_backend";
+      extraConfig = ''
+        allow 127.0.0.1;
+        allow ::1;
+        allow ${values.hosts.bicep.ipv4};
+        allow ${values.hosts.bicep.ipv6};
+        deny all;
+      '';
+    };
+  }
+  {
     locations = let
       connectionInfo = w: matrix-lib.workerConnectionResource "metrics" w;
-      socketAddress = w: let c = connectionInfo w; in "${c.host}:${toString (c.port)}";
+      socketAddress = w: let c = connectionInfo w; in "${c.host}:${toString c.port}";
 
       metricsPath = w: "/metrics/${w.type}/${toString w.index}";
       proxyPath = w: "http://${socketAddress w}/_synapse/metrics";
     in lib.mapAttrs' (n: v: lib.nameValuePair
-      (metricsPath v) ({
+      (metricsPath v) {
         proxyPass = proxyPath v;
         extraConfig = ''
           allow ${values.hosts.ildkule.ipv4};
           allow ${values.hosts.ildkule.ipv6};
           deny all;
         '';
-      }))
-      cfg.workers.instances;
       })
-  ({
+      cfg.workers.instances;
+  }
+  {
     locations."/metrics/master/1" = {
       proxyPass = "http://127.0.0.1:9000/_synapse/metrics";
       extraConfig = ''
@@ -272,5 +200,5 @@ in {
             labels = { };
           }]) + "/";
     };
-  })];
+  }];
 }

hosts/bicep/services/minecraft-heatmap.nix

@@ -0,0 +1,49 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.minecraft-heatmap;
+in
+{
+  sops.secrets."minecraft-heatmap/ssh-key/private" = {
+    mode = "600";
+  };
+
+  sops.secrets."minecraft-heatmap/postgres-passwd" = {
+    mode = "600";
+  };
+
+  services.minecraft-heatmap = {
+    enable = true;
+    database = {
+      host = "postgres.pvv.ntnu.no";
+      port = 5432;
+      name = "minecraft_heatmap";
+      user = "minecraft_heatmap";
+      passwordFile = config.sops.secrets."minecraft-heatmap/postgres-passwd".path;
+    };
+  };
+
+  systemd.services.minecraft-heatmap-ingest-logs = {
+    serviceConfig.LoadCredential = [
+      "sshkey:${config.sops.secrets."minecraft-heatmap/ssh-key/private".path}"
+    ];
+
+    preStart = let
+      knownHostsFile = pkgs.writeText "minecraft-heatmap-known-hosts" ''
+        innovation.pvv.ntnu.no ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE9O/y5uqcLKCodg2Q+XfZPH/AoUIyBlDhigImU+4+Kn
+        innovation.pvv.ntnu.no ssh-rsa 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
+        innovation.pvv.ntnu.no ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNjl3HfsDqmALWCL9uhz9k93RAD2565ndBqUh4N/rvI7MCwEJ6iRCdDev0YzB1Fpg24oriyYoxZRP24ifC2sQf8=
+      '';
+    in ''
+      mkdir -p '${cfg.minecraftLogsDir}'
+      "${lib.getExe pkgs.rsync}" \
+      --archive \
+      --verbose \
+      --progress \
+      --no-owner \
+      --no-group \
+      --rsh="${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=\"${knownHostsFile}\" -i \"$CREDENTIALS_DIRECTORY\"/sshkey" \
+      root@innovation.pvv.ntnu.no:/ \
+      '${cfg.minecraftLogsDir}'/
+    '';
+  };
+}

hosts/bicep/services/mysql.nix

@@ -48,6 +48,8 @@
     IPAddressAllow = [
       values.ipv4-space
       values.ipv6-space
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
     ];
   };
 }

hosts/bicep/services/nginx/default.nix

@@ -11,15 +11,5 @@
       "127.0.0.2"
       "[::1]"
     ];
-
-    appendConfig = ''
-      worker_processes 8;
-      worker_rlimit_nofile 8192;
-    '';
-
-    eventsConfig = ''
-      multi_accept on;
-      worker_connections 4096;
-    '';
   };
 }

hosts/bicep/services/postgres.nix

@@ -1,18 +1,15 @@
-{ config, pkgs, ... }:
+{ config, pkgs, values, ... }:
-let
-  sslCert = config.security.acme.certs."postgres.pvv.ntnu.no";
-in
 {
   services.postgresql = {
     enable = true;
     package = pkgs.postgresql_15;
     enableTCPIP = true;
 
-    dataDir = "/data/postgresql";
-
     authentication = ''
-      host all all 129.241.210.128/25 md5
+      host all all ${values.ipv4-space} md5
-      host all all 2001:700:300:1900::/64 md5
+      host all all ${values.ipv6-space} md5
+      host all all ${values.hosts.ildkule.ipv4}/32 md5
+      host all all ${values.hosts.ildkule.ipv6}/32 md5
     '';
 
     # Hilsen https://pgconfigurator.cybertec-postgresql.com/
@@ -77,14 +74,47 @@ in
     };
   };
 
-  systemd.services.postgresql.serviceConfig = {
+  systemd.tmpfiles.settings."10-postgresql"."/data/postgresql".d = {
-    LoadCredential = [
+    user = config.systemd.services.postgresql.serviceConfig.User;
-      "cert:${sslCert.directory}/cert.pem"
+    group = config.systemd.services.postgresql.serviceConfig.Group;
-      "key:${sslCert.directory}/key.pem"
+    mode = "0700";
-    ];
   };
 
-  users.groups.acme.members = [ "postgres" ];
+  systemd.services.postgresql-setup = {
+    after = [
+      "systemd-tmpfiles-setup.service"
+      "systemd-tmpfiles-resetup.service"
+    ];
+    serviceConfig = {
+      LoadCredential = [
+        "cert:/etc/certs/postgres.crt"
+        "key:/etc/certs/postgres.key"
+      ];
+
+      BindPaths = [ "/data/postgresql:/var/lib/postgresql" ];
+    };
+  };
+
+  systemd.services.postgresql = {
+    after = [
+      "systemd-tmpfiles-setup.service"
+      "systemd-tmpfiles-resetup.service"
+    ];
+    serviceConfig = {
+      LoadCredential = [
+        "cert:/etc/certs/postgres.crt"
+        "key:/etc/certs/postgres.key"
+      ];
+
+      BindPaths = [ "/data/postgresql:/var/lib/postgresql" ];
+    };
+  };
+
+  environment.snakeoil-certs."/etc/certs/postgres" = {
+    owner = "postgres";
+    group = "postgres";
+    subject = "/C=NO/O=Programvareverkstedet/CN=postgres.pvv.ntnu.no/emailAddress=drift@pvv.ntnu.no";
+  };
 
   networking.firewall.allowedTCPPorts = [ 5432 ];
   networking.firewall.allowedUDPPorts = [ 5432 ];

hosts/bob/configuration.nix

@@ -1,46 +0,0 @@
-{ config, pkgs, values, ... }:
-{
-  imports = [
-      # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-      ../../base.nix
-      ../../misc/metrics-exporters.nix
-      ./disks.nix
-
-      ../../misc/builder.nix
-    ];
-
-  sops.defaultSopsFile = ../../secrets/bob/bob.yaml;
-  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
-  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
-  sops.age.generateKey = true;
-
-  boot.loader.grub = {
-    enable = true;
-    efiSupport = true;
-    efiInstallAsRemovable = true;
-  };
-
-  networking.hostName = "bob"; # Define your hostname.
-
-  systemd.network.networks."30-all" = values.defaultNetworkConfig // {
-    matchConfig.Name = "en*";
-    DHCP = "yes";
-    gateway = [ ];
-  };
-
-  # List packages installed in system profile
-  environment.systemPackages = with pkgs; [
-  ];
-
-  # List services that you want to enable:
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "23.05"; # Did you read the comment?
-
-}

hosts/bob/disks.nix

@@ -1,39 +0,0 @@
-# Example to create a bios compatible gpt partition
-{ lib, ... }:
-{
-  disko.devices = {
-    disk.disk1 = {
-      device = lib.mkDefault "/dev/sda";
-      type = "disk";
-      content = {
-        type = "gpt";
-        partitions = {
-          boot = {
-            name = "boot";
-            size = "1M";
-            type = "EF02";
-          };
-          esp = {
-            name = "ESP";
-            size = "500M";
-            type = "EF00";
-            content = {
-              type = "filesystem";
-              format = "vfat";
-              mountpoint = "/boot";
-            };
-          };
-          root = {
-            name = "root";
-            size = "100%";
-            content = {
-              type = "filesystem";
-              format = "ext4";
-              mountpoint = "/";
-            };
-          };
-        };
-      };
-    };
-  };
-}

hosts/brzeczyszczykiewicz/configuration.nix

@@ -1,10 +1,9 @@
-{ config, pkgs, values, ... }:
+{ config, fp, pkgs, values, ... }:
 {
   imports = [
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
-      ../../base.nix
+      (fp /base)
-      ../../misc/metrics-exporters.nix
 
       ./services/grzegorz.nix
     ];

hosts/brzeczyszczykiewicz/services/grzegorz.nix

@@ -1,6 +1,6 @@
-{ config, ... }:
+{ config, fp, ... }:
 {
-  imports = [ ../../../modules/grzegorz.nix ];
+  imports = [ (fp /modules/grzegorz.nix) ];
 
   services.nginx.virtualHosts."${config.networking.fqdn}" = {
     serverAliases = [

hosts/buskerud/configuration.nix

@@ -1,36 +0,0 @@
-{ config, pkgs, values, ... }:
-{
-  imports = [
-    ./hardware-configuration.nix
-    ../../base.nix
-    ../../misc/metrics-exporters.nix
-  ];
-
-  # buskerud does not support efi?
-  # boot.loader.systemd-boot.enable = true;
-  # boot.loader.efi.canTouchEfiVariables = true;
-  boot.loader.grub.enable = true;
-  boot.loader.grub.device = "/dev/sdb";
-
-  networking.hostName = "buskerud";
-  networking.search = [ "pvv.ntnu.no" "pvv.org" ];
-  networking.nameservers = [ "129.241.0.200" "129.241.0.201" ];
-  networking.tempAddresses = "disabled";
-
-  systemd.network.networks."enp3s0f0" = values.defaultNetworkConfig // {
-    matchConfig.Name = "enp3s0f0";
-    address = with values.hosts.buskerud; [ (ipv4 + "/25") (ipv6 + "/64") ];
-  };
-
-  # List packages installed in system profile
-  environment.systemPackages = with pkgs; [
-  ];
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "23.05"; # Did you read the comment?
-}

hosts/georg/configuration.nix

@@ -1,12 +1,11 @@
-{ config, pkgs, values, ... }:
+{ config, fp, pkgs, values, ... }:
 {
   imports = [
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
-      ../../base.nix
+      (fp /base)
-      ../../misc/metrics-exporters.nix
 
-      ../../modules/grzegorz.nix
+      (fp /modules/grzegorz.nix)
     ];
 
   boot.loader.systemd-boot.enable = true;
@@ -25,6 +24,26 @@
 
   # List services that you want to enable:
 
+
+
+  services.spotifyd = {
+    enable = true;
+    settings.global = {
+      device_name = "georg";
+      use_mpris = false;
+      #dbus_type = "system";
+      #zeroconf_port = 1234;
+    };
+  };
+
+  networking.firewall.allowedTCPPorts = [
+    # config.services.spotifyd.settings.zeroconf_port
+    5353 # spotifyd is its own mDNS service wtf
+  ];
+
+
+
+
   # This value determines the NixOS release from which the default
   # settings for stateful data, like file locations and database versions
   # on your system were taken. It‘s perfectly fine and recommended to leave

hosts/ildkule/configuration.nix

@@ -1,42 +1,54 @@
-{ config, pkgs, values, ... }:
+{ config, fp, pkgs, lib, values, ... }:
 {
   imports = [
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
-      ../../base.nix
+      (fp /base)
-      ../../misc/metrics-exporters.nix
 
+      ./services/monitoring
       ./services/nginx
-      ./services/metrics
     ];
 
-  sops.defaultSopsFile = ../../secrets/ildkule/ildkule.yaml;
+  sops.defaultSopsFile = fp /secrets/ildkule/ildkule.yaml;
   sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
   sops.age.keyFile = "/var/lib/sops-nix/key.txt";
   sops.age.generateKey = true;
 
-  boot.loader.systemd-boot.enable = true;
+  boot.loader.grub.device = "/dev/vda";
-  boot.loader.efi.canTouchEfiVariables = true;
+  boot.tmp.cleanOnBoot = true;
+  zramSwap.enable = true;
 
-  networking.hostName = "ildkule"; # Define your hostname.
+  # Openstack Neutron and systemd-networkd are not best friends, use something else:
+  systemd.network.enable = lib.mkForce false;
+  networking = let
+    hostConf = values.hosts.ildkule;
+  in {
+    hostName = "ildkule";
+    tempAddresses = "disabled";
+    useDHCP = lib.mkForce true;
 
-  systemd.network.networks."30-ens18" = values.defaultNetworkConfig // {
+    search = values.defaultNetworkConfig.domains;
-    matchConfig.Name = "ens18";
+    nameservers = values.defaultNetworkConfig.dns;
-    address = with values.hosts.ildkule; [ (ipv4 + "/25") (ipv6 + "/64") ];
+    defaultGateway.address = hostConf.ipv4_internal_gw;
+
+    interfaces."ens4" = {
+      ipv4.addresses = [
+        { address = hostConf.ipv4;          prefixLength = 32; }
+        { address = hostConf.ipv4_internal; prefixLength = 24; }
+      ];
+      ipv6.addresses = [
+        { address = hostConf.ipv6;          prefixLength = 64; }
+      ];
+    };
   };
 
   # List packages installed in system profile
   environment.systemPackages = with pkgs; [
   ];
 
-  # List services that you want to enable:
+  # No devices with SMART
+  services.smartd.enable = false;
 
-  # This value determines the NixOS release from which the default
+  system.stateVersion = "23.11"; # Did you read the comment?
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "21.11"; # Did you read the comment?
 
 }

hosts/ildkule/hardware-configuration.nix

@@ -1,37 +1,16 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
+{ modulesPath, lib, ... }:
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
 {
-  imports =
+  imports = [ (modulesPath + "/profiles/qemu-guest.nix") ];
-    [ (modulesPath + "/profiles/qemu-guest.nix")
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "xen_blkfront" "vmw_pvscsi" ];
-    ];
+  boot.initrd.kernelModules = [ "nvme" ];
-
+  fileSystems."/" = {
-  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "sr_mod" "virtio_blk" ];
+    device = "/dev/disk/by-uuid/e35eb4ce-aac3-4f91-8383-6e7cd8bbf942";
-  boot.initrd.kernelModules = [ ];
+    fsType = "ext4";
-  boot.kernelModules = [ ];
+  };
-  boot.extraModulePackages = [ ];
+  fileSystems."/data" = {
-
+    device = "/dev/disk/by-uuid/0a4c1234-02d3-4b53-aeca-d95c4c8d534b";
-  fileSystems."/" =
-    { device = "/dev/disk/by-uuid/afe70fe4-681a-4675-8cbd-e5d08cdcf5b5";
     fsType = "ext4";
   };
 
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/B71A-E5CD";
-      fsType = "vfat";
-    };
-
-  swapDevices = [ ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }

hosts/ildkule/services/metrics/prometheus/default.nix

@@ -1,18 +0,0 @@
-{ config, ... }: {
-  imports = [
-    ./gogs.nix
-    ./matrix-synapse.nix
-    # TODO: enable once https://github.com/NixOS/nixpkgs/pull/242365 gets merged
-    # ./mysqld.nix
-    ./node.nix
-    ./postgres.nix
-  ];
-
-  services.prometheus = {
-    enable = true;
-    listenAddress = "127.0.0.1";
-    port = 9001;
-
-    ruleFiles = [ rules/synapse-v2.rules ];
-  };
-}

hosts/ildkule/services/metrics/prometheus/gogs.nix

@@ -1,16 +0,0 @@
-{ config, ... }: let
-  cfg = config.services.prometheus;
-in {
-  services.prometheus.scrapeConfigs = [{
-    job_name = "git-gogs";
-    scheme = "https";
-    metrics_path = "/-/metrics";
-    static_configs = [
-      {
-        targets = [
-          "essendrop.pvv.ntnu.no:443"
-        ];
-      }
-    ];
-  }];
-}

hosts/ildkule/services/metrics/prometheus/mysqld.nix

@@ -1,25 +0,0 @@
-{ config, ... }: let
-  cfg = config.services.prometheus;
-in {
-  sops.secrets."config/mysqld_exporter" = { };
-
-  services.prometheus = {
-    scrapeConfigs = [{
-      job_name = "mysql";
-      scheme = "http";
-      metrics_path = cfg.exporters.mysqld.telemetryPath;
-      static_configs = [
-        {
-          targets = [
-            "localhost:${toString cfg.exporters.mysqld.port}"
-          ];
-        }
-      ];
-    }];
-
-    exporters.mysqld = {
-      enable = true;
-      configFilePath = config.sops.secrets."config/mysqld_exporter".path;
-    };
-  };
-}

hosts/ildkule/services/metrics/prometheus/node.nix

@@ -1,22 +0,0 @@
-{ config, ... }: let
-  cfg = config.services.prometheus;
-in {
-  services.prometheus.scrapeConfigs = [{
-    job_name = "node";
-    static_configs = [
-      {
-        targets = [
-          "ildkule.pvv.ntnu.no:${toString cfg.exporters.node.port}"
-          "microbel.pvv.ntnu.no:9100"
-          "isvegg.pvv.ntnu.no:9100"
-          "knakelibrak.pvv.ntnu.no:9100"
-          "hildring.pvv.ntnu.no:9100"
-          "bicep.pvv.ntnu.no:9100"
-          "essendrop.pvv.ntnu.no:9100"
-          "andresbu.pvv.ntnu.no:9100"
-          "bekkalokk.pvv.ntnu.no:9100"
-        ];
-      }
-    ];
-  }];
-}