WIP: fix bluemap markers

New backup server just dropped!
This server is awfully slow, and the mdraid setup is awfully slow, and I doubt that this will be a good experience, but we now have a backup server again?

- Tried Disko and nixos-anywhere
- Tried using mdraid
- Found that md is ancient and bad
- Found that disko is 100% extra steps, and a lot more complicated and noisy than just formatting your disks yourself
- Found that systemd-boot doesn't support mdraid
- Found that we probably don't need to mirror the boot partition :)
- Found that old hardware is slow
- Found that old hardware can have poor support for iPXE with UEFI, and might do weird BIOS stuff on you when you least expect it
- Reaffirmed that zfs is love

Current disk layout:
- mdraid for boot/root disk
    - 4TB WD Red with 500MiB ESP with systemd-boot, Remaining mdraid - Old?
    - 4TB WD Red with 500MiB Unused partition, Remaining mdraid - Old?
- zfs pool "tank" for the actual backup data
    - 8TB Toshiba MG08 - New
    - 8TB Exos 7E10 - New

TODO:

- Document the death of Toriel on the wiki
- Document Bakke on the wiki
  - ... describing the poco loco disk layout
- Start backing stuff up
  - Restic? Borg? Rsync?
  - Make backup retention policy and zfs snapshot system
  - Document backup procedures

Reviewed-on: https://git.pvv.ntnu.no/Drift/pvv-nixos-config/pulls/87
Co-authored-by: Felix Albrigtsen <felix@albrigtsen.it>
Co-committed-by: Felix Albrigtsen <felix@albrigtsen.it>

.gitea/workflows/build-topology-graph.yml

@@ -0,0 +1,32 @@
+name: "Build topology graph"
+on:
+  push:
+    branches:
+      - main
+jobs:
+  evals:
+    runs-on: debian-latest
+    steps:
+    - uses: actions/checkout@v6
+
+    - name: Install sudo
+      run: apt-get update && apt-get -y install sudo
+
+    - uses: https://github.com/cachix/install-nix-action@v31
+
+    - name: Configure Nix
+      run: echo -e "show-trace = true\nmax-jobs = auto\ntrusted-users = root\nexperimental-features = nix-command flakes\nbuild-users-group =" > /etc/nix/nix.conf
+
+    - name: Build topology graph
+      run: nix build .#topology -L
+
+    - name: Upload topology graph
+      uses: https://git.pvv.ntnu.no/Projects/rsync-action@v2
+      with:
+        source: result/*.svg
+        quote-source: false
+        target: ${{ gitea.ref_name }}/topology_graph/
+        username: gitea-web
+        ssh-key: ${{ secrets.WEB_SYNC_SSH_KEY }}
+        host: pages.pvv.ntnu.no
+        known-hosts: "pages.pvv.ntnu.no ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIH2QjfFB+city1SYqltkVqWACfo1j37k+oQQfj13mtgg"

.gitea/workflows/eval.yml

@@ -4,10 +4,10 @@ on:
   push:
 jobs:
   evals:
-    runs-on: ubuntu-latest
+    runs-on: debian-latest
     steps:
-    - uses: actions/checkout@v3
+    - uses: actions/checkout@v6
     - run: apt-get update && apt-get -y install sudo
-    - uses: https://github.com/cachix/install-nix-action@v23
+    - uses: https://github.com/cachix/install-nix-action@v31
     - run: echo -e "show-trace = true\nmax-jobs = auto\ntrusted-users = root\nexperimental-features = nix-command flakes\nbuild-users-group =" > /etc/nix/nix.conf
     - run: nix flake check

.mailmap

@@ -0,0 +1,25 @@
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> <daniel.olsen99@gmail.com>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Lovbrotte Olsen <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Olsen <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> danio <danio@pvv.ntnu.no>
+Daniel Løvbrøtte Olsen <danio@pvv.ntnu.no> Daniel Olsen <danio@bicep.pvv.ntnu.no>
+
+
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> h7x4 <h7x4@nani.wtf>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Øystein Tveit <oysteikt@pvv.ntnu.no>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> oysteikt <oysteikt@pvv.ntnu.no>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Øystein <oysteikt@pvv.org>
+Øystein Kristoffer Tveit <oysteikt@pvv.ntnu.no> Oystein Kristoffer Tveit <oysteikt@pvv.ntnu.no>
+
+Felix Albrigtsen <felixalb@pvv.ntnu.no> <felix@albrigtsen.it>
+Felix Albrigtsen <felixalb@pvv.ntnu.no> <felixalbrigtsen@gmail.com>
+Felix Albrigtsen <felixalb@pvv.ntnu.no> felixalb <felixalb@pvv.ntnu.no>
+
+Peder Bergebakken Sundt <pederbs@pvv.ntnu.no> <pbsds@hotmail.com>
+
+Adrian Gunnar Lauterer <adriangl@pvv.ntnu.no> Adrian G L <adrian@lauterer.it>
+Adrian Gunnar Lauterer <adriangl@pvv.ntnu.no> Adrian Gunnar Lauterer <adrian@lauterer.it>
+
+Fredrik Robertsen <frero@pvv.ntnu.no> frero <frero@pvv.ntnu.no>
+Fredrik Robertsen <frero@pvv.ntnu.no> fredrikr79 <fredrikrobertsen7@gmail.com>

.sops.yaml

@@ -1,27 +1,31 @@
 keys:
   # Users
-  - &user_danio age17tagmpwqjk3mdy45rfesrfey6h863x8wfq38wh33tkrlrywxducs0k6tpq
+  - &user_danio age1ug30gg4y7ftuya0wdv7q0vh4egn00wlv2th7mt7cgc2ze46wmvyq9lq6ge
+  - &user_eirikwit age1ju7rd26llahz3g8tz7cy5ld52swj8gsmg0flrmrxngc0nj0avq3ssh0sn5
   - &user_felixalb age1mrnldl334l2nszuta6ywvewng0fswv2dz9l5g4qcwe3nj4yxf92qjskdx6
   - &user_oysteikt F7D37890228A907440E1FD4846B9228E814A2AAC
-  - &user_eirikwit age1ju7rd26llahz3g8tz7cy5ld52swj8gsmg0flrmrxngc0nj0avq3ssh0sn5
-  - &user_pederbs_sopp age1hmpdk4h69wxpwqk9tkud39f66hprhehxtzhgw97r6dvr7v0mx5jscsuhkn
-  - &user_pederbs_nord age1wrssr4z4g6vl3fd3qme5cewchmmhm0j2xe6wf2meu4r6ycn37anse98mfs
   - &user_pederbs_bjarte age1zhxul786an743u0fascv4wtc5xduu7qfy803lfs539yzhgmlq5ds2lznt5
+  - &user_pederbs_nord age1wrssr4z4g6vl3fd3qme5cewchmmhm0j2xe6wf2meu4r6ycn37anse98mfs
+  - &user_pederbs_sopp age1hmpdk4h69wxpwqk9tkud39f66hprhehxtzhgw97r6dvr7v0mx5jscsuhkn
 
   # Hosts
-  - &host_jokum age1gp8ye4g2mmw3may5xg0zsy7mm04glfz3788mmdx9cvcsdxs9hg0s0cc9kt
-  - &host_ildkule age1x28hmzvuv6f2n66c0jtqcca3h9rput8d7j5uek6jcpx8n9egd52sqpejq0
+  - &host_bakke age1syted6kt48sumjjucggh6r3uca4x2ppp4mfungf3lamkt2le05csc99633
   - &host_bekkalokk age12nj59tguy9wg882updc2vjdusx5srnxmjyfaqve4zx6jnnsaw3qsyjq6zd
-  - &host_bicep age1sl43gc9cw939z5tgha2lpwf0xxxgcnlw7w4xem4sqgmt2pt264vq0dmwx2
-  - &host_ustetind age1hffjafs4slznksefmtqrlj7rdaqgzqncn4un938rhr053237ry8s3rs0v8
+  - &host_bicep age19nk55kcs7s0358jpkn75xnr57dfq6fq3p43nartvsprx0su22v7qcgcjdx
+  - &host_ildkule age1x28hmzvuv6f2n66c0jtqcca3h9rput8d7j5uek6jcpx8n9egd52sqpejq0
   - &host_kommode age1mt4d0hg5g76qp7j0884llemy0k2ymr5up8vfudz6vzvsflk5nptqqd32ly
+  - &host_lupine-1 age1fkrypl6fu4ldsa7te4g3v4qsegnk7sd6qhkquuwzh04vguy96qus08902e
+  - &host_lupine-2 age1mu0ej57n4s30ghealhyju3enls83qyjua69986la35t2yh0q2s0seruz5n
+  - &host_lupine-3 age1j2u876z8hu87q5npfxzzpfgllyw8ypj66d7cgelmzmnrf3xud34qzkntp9
+  - &host_lupine-4 age1t8zlawqkmhye737pn8yx0z3p9cl947d9ktv2cajdc6hnvn52d3fsc59s2k
+  - &host_lupine-5 age199zkqq4jp4yc3d0hx2q0ksxdtp42xhmjsqwyngh8tswuck34ke3smrfyqu
+  - &host_ustetind age1hffjafs4slznksefmtqrlj7rdaqgzqncn4un938rhr053237ry8s3rs0v8
 
 creation_rules:
   # Global secrets
   - path_regex: secrets/[^/]+\.yaml$
     key_groups:
     - age:
-      - *host_jokum
       - *user_danio
       - *user_felixalb
       - *user_eirikwit
@@ -57,18 +61,6 @@ creation_rules:
       pgp:
       - *user_oysteikt
 
-  - path_regex: secrets/jokum/[^/]+\.yaml$
-    key_groups:
-    - age:
-      - *host_jokum
-      - *user_danio
-      - *user_felixalb
-      - *user_pederbs_sopp
-      - *user_pederbs_nord
-      - *user_pederbs_bjarte
-      pgp:
-      - *user_oysteikt
-
   - path_regex: secrets/ildkule/[^/]+\.yaml$
     key_groups:
     - age:
@@ -104,3 +96,31 @@ creation_rules:
       - *user_pederbs_bjarte
       pgp:
       - *user_oysteikt
+
+  - path_regex: secrets/lupine/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_lupine-1
+      - *host_lupine-2
+      - *host_lupine-3
+      - *host_lupine-4
+      - *host_lupine-5
+      - *user_danio
+      - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
+      pgp:
+      - *user_oysteikt
+
+  - path_regex: secrets/bakke/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_bakke
+      - *user_danio
+      - *user_felixalb
+      - *user_pederbs_sopp
+      - *user_pederbs_nord
+      - *user_pederbs_bjarte
+      pgp:
+      - *user_oysteikt

README.MD

@@ -1,61 +0,0 @@
-# PVV NixOS configs
-
-## Hvordan endre på ting
-
-Før du endrer på ting husk å ikke putte ting som skal være hemmelig uten å først lese seksjonen for hemmeligheter!
-
-Etter å ha klonet prosjektet ned og gjort endringer kan du evaluere configene med:
-
-`nix flake check --keep-going`
-
-før du bygger en maskin med:
-
-`nix build .#<maskinnavn>`
-
-hvis du vil være ekstra sikker på at alt bygger så kan du kjøre:
-
-`nix build .` for å bygge alle de viktige maskinene.
-
-NB: Dette kan ta opp til 30 minutter avhengig av hva som ligger i caches
-
-Husk å hvertfall stage nye filer om du har laget dem!
-
-Om alt bygger fint commit det og push til git repoet.
-Det er sikkert lurt å lage en PR først om du ikke er vandt til nix enda.
-
-Innen 24h skal alle systemene hente ned den nye konfigurasjonen og deploye den.
-
-Du kan tvinge en maskin til å oppdatere seg før dette ved å kjøre:
-`nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --upgrade --flake git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git`
-
-som root på maskinen.
-
-Hvis du ikke har lyst til å oppdatere alle pakkene (og kanskje måtte vente en stund!) kan du kjøre
-
-`nixos-rebuild switch --override-input nixpkgs nixpkgs --override-input nixpkgs-unstable nixpkgs-unstable --flake git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git`
-
-## Seksjonen for hemmeligheter
-
-For at hemmeligheter ikke skal deles med hele verden i git - eller å være world
-readable i nix-storen, bruker vi [sops-nix](https://github.com/Mic92/sops-nix)
-
-For å legge til secrets kan du kjøre f.eks. `sops secrets/jokum/jokum.yaml`
-Dette vil dekryptere filen og gi deg en text-editor du kan bruke for endre hemmelighetene.
-
-Et nix shell med dette verktøyet inkludert ligger i flaket og shell.nix og kan aktiveres med:
-
-`nix-shell` eller `nix develop`. Vi anbefaler det siste.
-I tilegg kan du sette opp [direnv](https://direnv.net/) slik at dette skjer automatisk
-
-for å få tilgang til å lese/skrive hemmeligheter må du spørre noen/noe som har tilgang til hemmelighetene
-om å legge til age eller pgp nøkkelen din i [`.sops.yaml`](https://git.pvv.ntnu.no/Drift/pvv-nixos-config/src/main/.sops.yaml)
-
-Denne kan du generere fra ssh-nøkkelene dine eller lage en egen nøkkel.
-
-### Legge til flere keys
-
-Gjør det som gir mening i .sops.yml
-
-Etter det kjør `sops updatekeys secrets/host/file.yml`
-
-MERK at det ikke er `sops -r` som BARE roterer nøkklene for de som allerede er i secretfila

README.md

@@ -0,0 +1,36 @@
+# PVV NixOS config
+
+This repository contains the NixOS configurations for Programvareverkstedet's server closet.
+In addition to machine configurations, it also contains a bunch of shared modules, packages, and
+more.
+
+## Machines
+
+| Name                       | Type     | Description                                               |
+|----------------------------|----------|-----------------------------------------------------------|
+| [bekkalokk][bek]           | Physical | Our main web host, webmail, wiki, idp, minecraft map, ... |
+| [bicep][bic]               | Virtual  | Database host, matrix, git mirrors, ...                   |
+|  bikkje                    | Virtual  | Experimental login box                                    |
+| [brzeczyszczykiewicz][brz] | Physical | Shared music player                                       |
+| [georg][geo]               | Physical | Shared music player                                       |
+| [ildkule][ild]             | Virtual  | Logging and monitoring host, prometheus, grafana, ...     |
+| [kommode][kom]             | Virtual  | Gitea + Gitea pages                                       |
+| [lupine][lup]              | Physical | Gitea CI/CD runners                                       |
+|  shark                     | Virtual  | Test host for authentication, absolutely horrendous       |
+| [wenche][wen]              | Virtual  | Nix-builders, general purpose compute                     |
+
+## Documentation
+
+- [Development - working on the PVV machines](./docs/development.md)
+- [Miscellaneous development notes](./docs/development-misc.md)
+- [User management](./docs/users.md)
+- [Secret management and `sops-nix`](./docs/secret-management.md)
+
+[bek]: https://wiki.pvv.ntnu.no/wiki/Maskiner/bekkalokk
+[bic]: https://wiki.pvv.ntnu.no/wiki/Maskiner/bicep
+[brz]: https://wiki.pvv.ntnu.no/wiki/Maskiner/brzęczyszczykiewicz
+[geo]: https://wiki.pvv.ntnu.no/wiki/Maskiner/georg
+[ild]: https://wiki.pvv.ntnu.no/wiki/Maskiner/ildkule
+[kom]: https://wiki.pvv.ntnu.no/wiki/Maskiner/kommode
+[lup]: https://wiki.pvv.ntnu.no/wiki/Maskiner/lupine
+[wen]: https://wiki.pvv.ntnu.no/wiki/Maskiner/wenche

base/default.nix

@@ -1,4 +1,9 @@
-{ pkgs, lib, fp, ... }:
+{
+  pkgs,
+  lib,
+  fp,
+  ...
+}:
 
 {
   imports = [
@@ -7,8 +12,11 @@
 
     ./networking.nix
     ./nix.nix
+    ./vm.nix
+    ./flake-input-exporter.nix
 
     ./services/acme.nix
+    ./services/uptimed.nix
     ./services/auto-upgrade.nix
     ./services/dbus.nix
     ./services/fwupd.nix
@@ -17,6 +25,9 @@
     ./services/nginx.nix
     ./services/openssh.nix
     ./services/postfix.nix
+    ./services/prometheus-node-exporter.nix
+    ./services/prometheus-systemd-exporter.nix
+    ./services/promtail.nix
     ./services/smartd.nix
     ./services/thermald.nix
     ./services/userborn.nix
@@ -50,9 +61,21 @@
     kitty.terminfo
   ];
 
+  # .bash_profile already works, but lets also use .bashrc like literally every other distro
+  # https://man.archlinux.org/man/core/bash/bash.1.en#INVOCATION
+  # home-manager usually handles this for you: https://github.com/nix-community/home-manager/blob/22a36aa709de7dd42b562a433b9cefecf104a6ee/modules/programs/bash.nix#L203-L209
+  # btw, programs.bash.shellInit just goes into environment.shellInit which in turn goes into /etc/profile, spooky shit
+  programs.bash.shellInit = ''
+    if [ -n "''${BASH_VERSION:-}" ]; then
+      if [[ ! -f ~/.bash_profile && ! -f ~/.bash_login ]]; then
+       [[ -f ~/.bashrc ]] && . ~/.bashrc
+      fi
+    fi
+  '';
+
   programs.zsh.enable = true;
 
-  security.lockKernelModules = true;
+  # security.lockKernelModules = true;
   security.protectKernelImage = true;
   security.sudo.execWheelOnly = true;
   security.sudo.extraConfig = ''
@@ -64,4 +87,3 @@
   # Trusted users on the nix builder machines
   users.groups."nix-builder-users".name = "nix-builder-users";
 }
-

base/flake-input-exporter.nix

@@ -0,0 +1,55 @@
+{
+  config,
+  inputs,
+  lib,
+  pkgs,
+  values,
+  ...
+}:
+let
+  data = lib.flip lib.mapAttrs inputs (
+    name: input: {
+      inherit (input)
+        lastModified
+        ;
+    }
+  );
+  folder = pkgs.writeTextDir "share/flake-inputs" (
+    lib.concatMapStringsSep "\n" (
+      { name, value }: ''nixos_last_modified_input{flake="${name}"} ${toString value.lastModified}''
+    ) (lib.attrsToList data)
+  );
+  port = 9102;
+in
+{
+  services.nginx.virtualHosts."${config.networking.fqdn}-nixos-metrics" = {
+    serverName = config.networking.fqdn;
+    serverAliases = [
+      "${config.networking.hostName}.pvv.org"
+    ];
+    locations."/metrics" = {
+      root = "${folder}/share";
+      tryFiles = "/flake-inputs =404";
+      extraConfig = ''
+        default_type text/plain;
+      '';
+    };
+    listen = [
+      {
+        inherit port;
+        addr = "0.0.0.0";
+      }
+    ];
+    extraConfig = ''
+      allow ${values.hosts.ildkule.ipv4}/32;
+      allow ${values.hosts.ildkule.ipv6}/128;
+      allow 127.0.0.1/32;
+      allow ::1/128;
+      allow ${values.ipv4-space};
+      allow ${values.ipv6-space};
+      deny all;
+    '';
+  };
+
+  networking.firewall.allowedTCPPorts = [ port ];
+}

base/nix.nix

@@ -1,4 +1,4 @@
-{ inputs, ... }:
+{ lib, config, inputs, ... }:
 {
   nix = {
     gc = {
@@ -9,8 +9,9 @@
 
     settings = {
       allow-dirty = true;
+      auto-allocate-uids = true;
       builders-use-substitutes = true;
-      experimental-features = [ "nix-command" "flakes" ];
+      experimental-features = [ "nix-command" "flakes" "auto-allocate-uids" ];
       log-lines = 50;
       use-xdg-base-directories = true;
     };
@@ -21,11 +22,16 @@
     ** use the same channel the system
     ** was built with
     */
-    registry = {
-      "nixpkgs".flake = inputs.nixpkgs;
-      "nixpkgs-unstable".flake = inputs.nixpkgs-unstable;
-      "pvv-nix".flake = inputs.self;
-    };
+    registry = lib.mkMerge [
+      {
+        "nixpkgs".flake = inputs.nixpkgs;
+        "nixpkgs-unstable".flake = inputs.nixpkgs-unstable;
+      }
+      # We avoid the reference to self in vmVariant to get a stable system .outPath for equivalence testing
+      (lib.mkIf (!config.virtualisation.isVmVariant) {
+        "pvv-nix".flake = inputs.self;
+      })
+    ];
     nixPath = [
       "nixpkgs=${inputs.nixpkgs}"
       "unstable=${inputs.nixpkgs-unstable}"

base/services/auto-upgrade.nix

@@ -1,26 +1,39 @@
-{ inputs, pkgs, lib, ... }:
+{ config, inputs, pkgs, lib, ... }:
+
+let
+  inputUrls = lib.mapAttrs (input: value: value.url) (import "${inputs.self}/flake.nix").inputs;
+in
+
 {
   system.autoUpgrade = {
     enable = true;
     flake = "git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git";
     flags = [
-      # --update-input is deprecated since nix 2.22, and removed in lix 2.90
-      # https://git.lix.systems/lix-project/lix/issues/400
       "--refresh"
-      "--override-input" "nixpkgs" "github:nixos/nixpkgs/nixos-24.11-small"
-      "--override-input" "nixpkgs-unstable" "github:nixos/nixpkgs/nixos-unstable-small"
       "--no-write-lock-file"
-    ];
+      # --update-input is deprecated since nix 2.22, and removed in lix 2.90
+      # as such we instead use --override-input combined with --refresh
+      # https://git.lix.systems/lix-project/lix/issues/400
+    ] ++ (lib.pipe inputUrls [
+      (lib.intersectAttrs {
+        nixpkgs = { };
+        nixpkgs-unstable = { };
+      })
+      (lib.mapAttrsToList (input: url: ["--override-input" input url]))
+      lib.concatLists
+    ]);
   };
 
   # workaround for https://github.com/NixOS/nix/issues/6895
   # via https://git.lix.systems/lix-project/lix/issues/400
-  environment.etc."current-system-flake-inputs.json".source
-    = pkgs.writers.writeJSON "flake-inputs.json" (
-      lib.flip lib.mapAttrs inputs (name: input:
-        # inputs.*.sourceInfo sans outPath, since writeJSON will otherwise serialize sourceInfo like a derivation
-        lib.removeAttrs (input.sourceInfo or {}) [ "outPath" ]
-          // { store-path = input.outPath; } # comment this line if you don't want to retain a store reference to the flake inputs
-      )
-    );
+  environment.etc = lib.mkIf (!config.virtualisation.isVmVariant) {
+    "current-system-flake-inputs.json".source
+      = pkgs.writers.writeJSON "flake-inputs.json" (
+        lib.flip lib.mapAttrs inputs (name: input:
+          # inputs.*.sourceInfo sans outPath, since writeJSON will otherwise serialize sourceInfo like a derivation
+          lib.removeAttrs (input.sourceInfo or {}) [ "outPath" ]
+            // { store-path = input.outPath; } # comment this line if you don't want to retain a store reference to the flake inputs
+        )
+      );
+  };
 }

base/services/nginx.nix

@@ -20,14 +20,14 @@
     recommendedGzipSettings = true;
 
     appendConfig = ''
-      pcre_jit on;
+      # pcre_jit on;
       worker_processes auto;
       worker_rlimit_nofile 100000;
     '';
     eventsConfig = ''
       worker_connections 2048;
       use epoll;
-      multi_accept on;
+      # multi_accept on;
     '';
   };
 
@@ -40,6 +40,25 @@
   };
 
   services.nginx.virtualHosts."_" = lib.mkIf config.services.nginx.enable {
+    listen = [
+      {
+        addr = "0.0.0.0";
+        extraParameters = [
+          "default_server"
+          # Seemingly the default value of net.core.somaxconn
+          "backlog=4096"
+          "deferred"
+        ];
+      }
+      {
+        addr = "[::0]";
+        extraParameters = [
+          "default_server"
+          "backlog=4096"
+          "deferred"
+        ];
+      }
+    ];
     sslCertificate = "/etc/certs/nginx.crt";
     sslCertificateKey = "/etc/certs/nginx.key";
     addSSL = true;

base/services/postfix.nix

@@ -6,18 +6,17 @@ in
   services.postfix = {
     enable = true;
 
-    hostname = "${config.networking.hostName}.pvv.ntnu.no";
-    domain = "pvv.ntnu.no";
+    settings.main = {
+      myhostname = "${config.networking.hostName}.pvv.ntnu.no";
+      mydomain = "pvv.ntnu.no";
 
-    relayHost = "smtp.pvv.ntnu.no";
-    relayPort = 465;
+      # Nothing should be delivered to this machine
+      mydestination = [ ];
+
+      relayhost = [ "smtp.pvv.ntnu.no:465" ];
 
-    config = {
       smtp_tls_wrappermode = "yes";
       smtp_tls_security_level = "encrypt";
     };
-
-    # Nothing should be delivered to this machine
-    destination = [ ];
   };
 }

base/services/prometheus-node-exporter.nix

@@ -0,0 +1,23 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.node;
+in
+{
+  services.prometheus.exporters.node = {
+    enable = lib.mkDefault true;
+    port = 9100;
+    enabledCollectors = [ "systemd" ];
+  };
+
+  systemd.services.prometheus-node-exporter.serviceConfig = lib.mkIf cfg.enable {
+    IPAddressDeny = "any";
+    IPAddressAllow = [
+      "127.0.0.1"
+      "::1"
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
+    ];
+  };
+
+  networking.firewall.allowedTCPPorts = lib.mkIf cfg.enable [ cfg.port ];
+}

base/services/prometheus-systemd-exporter.nix

@@ -0,0 +1,26 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.systemd;
+in
+{
+  services.prometheus.exporters.systemd = {
+    enable = lib.mkDefault true;
+    port = 9101;
+    extraFlags = [
+      "--systemd.collector.enable-restart-count"
+      "--systemd.collector.enable-ip-accounting"
+    ];
+  };
+
+  systemd.services.prometheus-systemd-exporter.serviceConfig = {
+    IPAddressDeny = "any";
+    IPAddressAllow = [
+      "127.0.0.1"
+      "::1"
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
+    ];
+  };
+
+  networking.firewall.allowedTCPPorts = lib.mkIf cfg.enable [ cfg.port ];
+}

base/services/promtail.nix

@@ -0,0 +1,38 @@
+{ config, lib, values, ... }:
+let
+  cfg = config.services.prometheus.exporters.node;
+in
+{
+  services.promtail = {
+    enable = lib.mkDefault true;
+    configuration = {
+      server = {
+        http_listen_port = 28183;
+        grpc_listen_port = 0;
+      };
+      clients = [{
+        url = "http://ildkule.pvv.ntnu.no:3100/loki/api/v1/push";
+      }];
+      scrape_configs = [{
+        job_name = "systemd-journal";
+        journal = {
+          max_age = "12h";
+          labels = {
+            job = "systemd-journal";
+            host = config.networking.hostName;
+          };
+        };
+        relabel_configs = [
+          {
+            source_labels = [ "__journal__systemd_unit" ];
+            target_label = "unit";
+          }
+          {
+            source_labels = [ "__journal_priority_keyword" ];
+            target_label = "level";
+          }
+        ];
+      }];
+    };
+  };
+}

base/services/uptimed.nix

@@ -0,0 +1,59 @@
+{ config, pkgs, lib, ... }:
+let
+  cfg = config.services.uptimed;
+in
+{
+  options.services.uptimed.settings = lib.mkOption {
+    description = "";
+    default = { };
+    type = lib.types.submodule {
+      freeformType = with lib.types; attrsOf (either str (listOf str));
+    };
+  };
+
+  config = {
+    services.uptimed = {
+      enable = true;
+
+      settings = let
+        stateDir = "/var/lib/uptimed";
+      in {
+        PIDFILE = "${stateDir}/pid";
+        SENDMAIL = lib.mkDefault "${pkgs.system-sendmail}/bin/sendmail -t";
+      };
+    };
+
+    systemd.services.uptimed = lib.mkIf (cfg.enable) {
+      serviceConfig = let
+        uptimed = pkgs.uptimed.overrideAttrs (prev: {
+          postPatch = ''
+             substituteInPlace Makefile.am \
+               --replace-fail '$(sysconfdir)/uptimed.conf' '/var/lib/uptimed/uptimed.conf'
+             substituteInPlace src/Makefile.am \
+               --replace-fail '$(sysconfdir)/uptimed.conf' '/var/lib/uptimed/uptimed.conf'
+          '';
+        });
+
+      in {
+        Type = "notify";
+
+        ExecStart = lib.mkForce "${uptimed}/sbin/uptimed -f";
+
+        BindReadOnlyPaths = let
+          configFile = lib.pipe cfg.settings [
+            (lib.mapAttrsToList
+              (k: v:
+                if builtins.isList v
+                  then lib.mapConcatStringsSep "\n" (v': "${k}=${v'}") v
+                  else "${k}=${v}")
+            )
+            (lib.concatStringsSep "\n")
+            (pkgs.writeText "uptimed.conf")
+          ];
+        in [
+          "${configFile}:/var/lib/uptimed/uptimed.conf"
+        ];
+      };
+    };
+  };
+}

base/vm.nix

@@ -0,0 +1,15 @@
+{ lib, ... }:
+
+# This enables
+#     lib.mkIf (!config.virtualisation.isVmVariant) { ... }
+
+{
+  options.virtualisation.isVmVariant = lib.mkOption {
+    description = "`true` if system is build with 'nixos-rebuild build-vm'";
+    type = lib.types.bool;
+    default = false;
+  };
+  config.virtualisation.vmVariant = {
+    virtualisation.isVmVariant = true;
+  };
+}

docs/development-misc.md

@@ -0,0 +1,103 @@
+# Miscellaneous development notes
+
+This document contains a bunch of information that is not particularly specific to the pvv nixos config,
+but concerns technologies we use often or gotchas to be aware of when working with NixOS. A lot of the information
+here is already public information spread around the internet, but we've collected some of the items we use often
+here.
+
+## The firewall
+
+`networking.firewall` is a NixOS module that configures `iptables` rules on the machine. It is enabled by default on
+all of our machines, and it can be easy to forget about it when setting up new services, especially when we are the
+ones creating the NixOS module.
+
+When setting up a new service that listens on a TCP or UDP port, make sure to add the appropriate ports to either
+`networking.firewall.allowedTCPPorts` or `networking.firewall.allowedUDPPorts`.
+
+You can list out the current firewall rules by running `sudo iptables -L -n -v` on the machine.
+
+## Finding stuff
+
+Finding stuff, both underlying implementation and usage is absolutely crucial when working on nix.
+Oftentimes, the documentation will be outdated, lacking or just plain out wrong. These are some of
+the techniques we have found to be quite good when working with nix.
+
+### [ripgrep](https://github.com/BurntSushi/ripgrep)
+
+ripgrep (or `rg` for short) is a tool that lets you recursively grep for regex patters in a directory.
+
+It is great for finding references to configuration, and where and how certain things are used. It is
+especially great when working with [nixpkgs](https://github.com/NixOS/nixpkgs), which is quite large.
+
+### GitHub Search
+
+When trying to set up a new service or reconfigure something, it is very common that someone has done it
+before you, but it has never been documented anywhere. A lot of Nix code exists on GitHub, and you can
+easily query it by using the `lang:nix` filter in the search bar.
+
+For example: https://github.com/search?q=lang%3Anix+dibbler&type=code
+
+## rsync
+
+`rsync` is a tool for synchronizing files between machines. It is very useful when transferring large
+amounts of data from a to b. We use it for multiple things, often when data is produced or stored on
+one machine, and we want to process or convert it on another. For example, we use it to transfer gitea
+artifacts, to transfer gallery pictures, to transfer minecraft world data for map rendering, and more.
+
+Along with `rsync`, we often use a lesser known tool called `rrsync`, which you can use inside an ssh
+configuration (`authorized_keys` file) to restrict what paths a user can access when connecting over ssh.
+This is useful both as a security measure, but also to avoid accidental overwrites of files outside the intended
+path. `rrsync` will use chroot to restrict what paths the user can access, as well as refuse to run arbitrary commands.
+
+## `nix repl`
+
+`nix repl` is an interactive REPL for the Nix language. It is very useful for experimenting with Nix code,
+and testing out small snippets of code to make sure it behaves as expected. You can also use it to explore
+NixOS machine configurations, to interactively see that the configuration evaluates to what you expect.
+
+```
+# While in the pvv-nixos-config directory
+nix repl .
+
+# Upon writing out the config path and clickin [Tab], you will get autocompletion suggestions:
+nix-repl> nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts._
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.bekkalokk.pvv.ntnu.no-nixos-metrics
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.idp.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.minecraft.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pvv.org
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.pw.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.roundcubeplaceholder.example.com
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.snappymail.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.webmail.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.wiki.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.www.pvv.ntnu.no
+nixosConfigurations.bekkalokk.config.services.nginx.virtualHosts.www.pvv.org
+```
+
+## `nix why-depends`
+
+If you ever wonder why a certain package is being used as a dependency of another package,
+or another machine, you can use `nix why-depends` to find the dependency path from one package to another.
+This is often useful after updating nixpkgs and finding an error saying that a certain package is insecure,
+broken or whatnot. You can do something like the following
+
+```bash
+# Why does bekkalokk depend on openssl?
+nix why-depends .#nixosConfigurations.bekkalokk.config.system.build.toplevel .#nixosConfigurations.bekkalokk.pkgs.openssl
+
+# Why does bekkalokk's minecraft-server depend on zlib? (this is not real)
+nix why-depends .#nixosConfigurations.bekkalokk.pkgs.minecraft-server .#nixosConfigurations.bekkalokk.pkgs.zlib
+```
+
+## php-fpm
+
+php-fpm (FastCGI Process Manager) is a PHP implementation that is designed for speed and production use. We host a bunch
+of different PHP applications (including our own website), and so we use php-fpm quite a bit. php-fpm typically exposes a
+unix socket that nginx will connect to, and php-fpm will then render php upon web requests forwarded from nginx and return
+it.
+
+php-fpm has a tendency to be a bit hard to debug. It is not always very willing to spit out error messages and logs, and so
+it can be a bit hard to figure out what's up when something goes wrong. You should see some of the commented stuff laying around
+in the website code on bekkalokk for examples of how to configure php-fpm for better logging and error reporting.

docs/development.md

@@ -0,0 +1,190 @@
+# Development - working on the PVV machines
+
+This document outlines the process of editing our NixOS configurations, and testing and deploying said changes
+to the machines. Most of the information written here is specific to the PVV NixOS configuration, and the topics
+will not really cover the nix code itself in detail. You can find some more resources for that by either following
+the links from the *Upstream documentation* section below, or in [Miscellaneous development notes](./development-misc.md).
+
+## Editing nix files
+
+> [!WARN]
+> Before editing any nix files, make sure to read [Secret management and `sops-nix`](./secret-management.md)!
+> We do not want to add any secrets in plaintext to the nix files, and certainly not commit and publish
+> them into the common public.
+
+The files are plaintext code, written in the [`Nix` language](https://nix.dev/manual/nix/stable/language/).
+
+Below is a list of important files and directories, and a description of what they contain.
+
+### `flake.nix`
+
+The `flake.nix` file is a [nix flake](https://wiki.nixos.org/wiki/Flakes) and makes up the entrypoint of the
+entire configuration. It declares what inputs are used (similar to dependencies), as well as what outputs the
+flake exposes. In our case, the most important outputs are the `nixosConfigurations` (our machine configs), but
+we also expose custom modules, packages, devshells, and more. You can run `nix flake show` to get an overview of
+the outputs (however you will need to [enable the `nix-flakes` experimental option](https://wiki.nixos.org/wiki/Flakes#Setup)).
+
+You will find that a lot of the flake inputs are the different PVV projects that we develop, imported to be hosted
+on the NixOS machines. This makes it easy to deploy changes to these projects, as we can just update the flake input
+to point to a new commit or version, and then rebuild the machines.
+
+A NixOS configuration is usually made with the `nixpkgs.lib.nixosSystem` function, however we have a few custom wrapper
+functions named `nixosConfig` and `stableNixosConfig` that abstracts away some common configuration we want on all our machines.
+
+### `values.nix`
+
+`values.nix` is a somewhat rare pattern in NixOS configurations around the internet. It contains a bunch of constant values
+that we use throughout the configuration, such as IP addresses, DNS names, paths and more. This not only makes it easier to
+change the values should we need to, but it also makes the configuration more readable. Instead of caring what exact IP any
+machine has, you can write `values.machines.name.ipv4` and abstract the details away.
+
+### `base`
+
+The `base` directory contains a bunch of NixOS configuration that is common for all or most machines. Some of the config
+you will find here sets defaults for certain services without enabling them, so that when they are enabled in a machine config,
+we don't need to repeat the same defaults over again. Other parts actually enable certain services that we want on all machines,
+such as `openssh` or the auto upgrade timer.
+
+### Vendoring `modules` and `packages`
+
+Sometimes, we either find that the packages or modules provided by `nixpkgs` is not sufficient for us,
+or that they are bugged in some way that can not be easily overrided. There are also cases where the
+modules or packages does not exist. In these cases, we tend to either copy and modify the modules and
+packages from nixpkgs, or create our own. These modules and packages end up in the top-level `modules`
+and `packages` directories. They are usually exposed in `flake.nix` as flake outputs `nixosModules.<name>`
+and `packages.<platform>.<name>`, and they are usually also added to the machines that need them in the flake.
+
+In order to override or add an extra package, the easiest way is to use an [`overlay`](https://wiki.nixos.org/wiki/Overlays).
+This makes it so that the package from `pkgs.<name>` now refers to the modified variant of the package.
+
+In order to add a module, you can just register it in the modules of the nixos machine.
+In order to override a module, you also have to use `disabledModules = [ "<path-relative-to-nixpkgs/modules>" ];`.
+Use `rg` to find examples of the latter.
+
+Do note that if you believe a new module to be of high enough quality, or the change you are making to be
+relevant for every nix user, you should strongly consider also creating a PR towards nixpkgs. However,
+getting changes made there has a bit higher threshold and takes more time than making changes in the PVV config,
+so feel free to make the changes here first. We can always remove the changes again once the upstreaming is finished.
+
+### `users`, `secrets` and `keys`
+
+For `users`, see [User management](./users.md)
+
+For `secrets` and `keys`, see [Secret management and `sops-nix`](./secret-management.md)
+
+### Collaboration
+
+We use our gitea to collaborate on changes to the nix configuration. Every PVV maintenance member should have
+access to the repository. The usual workflow is that we create a branch for the change we want to make, do a bunch
+of commits and changes, and then open a merge request for review (or just rebase on master if you know what you are doing).
+
+### Upstream documentation
+
+Here are different sources of documentation and stuff that you might find useful while
+writing, editing and debugging nix code.
+
+ - [nixpkgs repository](https://github.com/NixOS/nixpkgs)
+
+This is particularly useful to read the source code, as well as upstreaming pieces of code that we think
+everyone would want
+
+ - [NixOS search](https://search.nixos.org/)
+
+This is useful for searching for both packages and NixOS options.
+
+ - [nixpkgs documentation](https://nixos.org/manual/nixpkgs/stable/)
+ - [NixOS documentation](https://nixos.org/manual/nixos/stable/)
+ - [nix (the tool) documentation](https://nix.dev/manual/nix/stable/)
+
+All of the three above make up the official documentation with all technical
+details about the different pieces that makes up NixOS.
+
+ - [The official NixOS wiki](https://wiki.nixos.org)
+
+User-contributed guides, tips and tricks, and whatever else.
+
+ - [nix.dev](https://nix.dev)
+
+Additional stuff
+
+ - [Noogle](https://noogle.dev)
+
+This is useful when looking for nix functions and packaging helpers.
+
+## Testing and deploying changes
+
+After editing the nix files on a certain branch, you will want to test and deploy the changes to the machines.
+Unfortunately, we don't really have a good setup for testing for runtime correctness locally, but we can at least
+make sure that the code evaluates and builds correctly before deploying.
+
+To just check that the code evaluates without errors, you can run:
+
+```bash
+nix flake check
+# Or if you want to keep getting all errors before it quits:
+nix flake check --keep-going
+```
+
+> [!NOTE]
+> If you are making changes that involves creating new nix files, remember to `git add` those files before running
+> any nix commands. Nix refuses to acknowledge files that are not either commited or at least staged. It will spit
+> out an error message about not finding the file in question.
+
+### Building machine configurations
+
+To build any specific machine configuration and look at the output, you can run:
+
+```bash
+nix build .#nixosConfigurations.<machine-name>.config.system.build.toplevel
+# or just
+nix build .#<machine-name>
+```
+
+This will create a symlink name `./result` to a directory containing the built NixOS system. It is oftentimes
+the case that config files for certain services only end up in the nix store without being put into `/etc`. If you wish
+to read those files, you can often find them by looking at the systemd unit files in `./result/etc/systemd/system/`.
+(if you are using vim, `gf` or go-to-file while the cursor is over a file path is a useful trick while doing this).
+
+If you have edited something that affects multiple machines, you can also build all important machines at once by running:
+
+```bash
+nix build .#
+```
+
+> [!NOTE]
+> Building all machines at once can take a long time, depending on what has changed and whether you have already
+> built some of the machines recently. Be prepared to wait for up to an hour to build all machines from scratch
+> if this is the first time.
+
+### Deploying to machines
+
+> [!WARN]
+> Be careful to think about state when testing changes against the machines. Sometimes, a certain change
+> can lead to irreversible changes to the data stored on the machine. An example would be a set of database
+> migrations applied when testing a newer version of a service. Unless that service also comes with downwards
+> migrations, you can not go back to the previous version without losing data.
+
+To deploy the changes to a machine, you should first SSH into the machine, and clone the pvv-nixos-config
+repository unless you have already done so. After that, checkout the branch you want to deploy from, and rebuild:
+
+```bash
+# Run this while in the pvv-nixos-config directory
+sudo nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --flake .# --upgrade
+```
+
+This will rebuild the NixOS system on the current branch and switch the system configuration to reflect the new changes.
+
+Note that unless you eventually merge the current changes into `main`, the machine will rebuild itself automatically and
+revert the changes on the next nightly rebuild (tends to happen when everybody is asleep).
+
+### Forcefully reset to `main`
+
+If you ever want to reset a machine to the `main` branch, you can do so by running:
+
+```bash
+nixos-rebuild switch --update-input nixpkgs --update-input nixpkgs-unstable --no-write-lock-file --refresh --upgrade --flake git+https://git.pvv.ntnu.no/Drift/pvv-nixos-config.git
+```
+
+This will ignore the current branch and just pull the latest `main` from the git repository directly from gitea.
+You can also use this command if there are updates on the `main` branch that you want to deploy to the machine without
+waiting for the nightly rebuild.

docs/secret-management.md

@@ -0,0 +1,160 @@
+# Secret management and `sops-nix`
+
+Nix config is love, nix config is life, and publishing said config to the
+internet is not only a good deed and kinda cool, but also encourages properly
+secured configuration as opposed to [security through obscurity](https://en.wikipedia.org/wiki/Security_through_obscurity).
+That being said, there are some details of the config that we really shouldn't
+share with the general public. In particular, there are so-called *secrets*, that is
+API keys, passwords, tokens, cookie secrets, salts, peppers and jalapenos that we'd
+rather keep to ourselves. However, it is not entirely trivial to do so in the NixOS config.
+For one, we'd have to keep these secrets out of the public git repo somehow, and secondly
+everything that is configured via nix ends up as world readable files (i.e. any user on the
+system can read the file) in `/nix/store`.
+
+In order to solve this, we use a NixOS module called [`sops-nix`](https://github.com/Mic92/sops-nix)
+which uses a technology called [`sops`](https://github.com/getsops/sops) behind the scenes.
+The idea is simple: we encrypt these secrets with a bunch of different keys and store the
+encrypted files in the git repo. First of all, we encrypt the secrets a bunch of time with
+PVV maintenance member's keys, so that we can decrypt and edit the contents. Secondly, we
+encrypt the secrets with the [host keys]() of the NixOS machines, so that they can decrypt
+the secrets. The secrets will be decrypted and stored in a well-known location (usually `/run/secrets`)
+so that they do not end up in the nix store, and are not world readable.
+
+This way, we can both keep the secrets in the git repository and let multiple people edit them,
+but also ensure that they don't end up in the wrong hands.
+
+## Adding a new machine
+
+In order to add a new machine to the nix-sops setup, you should do the following:
+
+```console
+# Create host keys (if they don't already exist)
+ssh-keygen -A -b 4096
+
+# Derive an age-key from the public host key
+nix-shell -p ssh-to-age --run 'cat /etc/ssh/ssh_host_ed25519_key.pub | ssh-to-age'
+
+# Register the age key in .sops.yaml
+vim .sops.yaml
+```
+
+The contents of `.sops.yaml` should look like this:
+
+```yaml
+keys:
+  # Users
+  ...
+
+  # Hosts
+  ...
+  - &host_<machine_name> <public_age_key>
+
+creation_rules:
+  ...
+
+  - path_regex: secrets/<machine_name>/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_<machine_name>
+      - ... user keys
+    - pgp:
+      - ... user keys
+```
+
+> [!NOTE]
+> Take care that all the keys in the `age` and `pgp` sections are prefixed
+> with a `-`, or else sops might try to encrypt the secrets in a way where
+> you need both keys present to decrypt the content. Also, it tends to throw
+> interesting errors when it fails to do so.
+
+```console
+# While cd-ed into the repository, run this to get a shell with the `sops` tool present
+nix-shell
+```
+
+Now you should also be able to edit secrets for this machine by running:
+
+```
+sops secrets/<machine_name>/<machine_name>.yaml
+```
+
+## Adding a user
+
+Adding a user is quite similar to adding a new machine.
+This guide assumes you have already set up SSH keys.
+
+```
+# Derive an age-key from your key
+# (edit the path to the key if it is named something else)
+nix-shell -p ssh-to-age --run 'cat ~/.ssh/id_ed25519.pub | ssh-to-age'
+
+# Register the age key in .sops.yaml
+vim .sops.yaml
+```
+
+The contents of `.sops.yaml` should look like this:
+
+```yaml
+keys:
+  # Users
+  ...
+  - &user_<user_name> <public_age_key>
+
+  # Hosts
+  ...
+
+creation_rules:
+  ...
+
+  # Do this for all the machines you are planning to edit
+  # (or just do it for all machines)
+  - path_regex: secrets/<machine_name>/[^/]+\.yaml$
+    key_groups:
+    - age:
+      - *host_<machine_name>
+      - ... user keys
+      - *host_<user_name>
+    - pgp:
+      - ... user keys
+```
+
+Now that sops is properly configured to recognize the key, you need someone
+who already has access to decrypt all the secrets and re-encrypt them with your
+key. At this point, you should probably [open a PR](https://docs.gitea.com/usage/issues-prs/pull-request)
+and ask someone in PVV maintenance if they can checkout the PR branch, run the following
+command and push the diff back into the PR (and maybe even ask them to merge if you're feeling
+particularly needy).
+
+```console
+sops updatekeys secrets/*/*.yaml
+```
+
+## Updating keys
+
+> [!NOTE]
+> At some point, we found this flag called `sops -r` that seemed to be described to do what
+> `sops updatekeys` does, do not be fooled. This only rotates the "inner key" for those who
+> already have the secrets encrypted with their key.
+
+Updating keys is done with this command:
+
+```console
+sops updatekeys secrets/*/*.yaml
+```
+
+However, there is a small catch. [oysteikt](https://git.pvv.ntnu.no/oysteikt) has kinda been
+getting gray hairs lately, and refuses to use modern technology - he is still stuck using GPG.
+This means that to be able to re-encrypt the sops secrets, you will need to have a gpg keychain
+with his latest public key available. The key has an expiry date, so if he forgets to update it,
+you should send him and angry email and tag him a bunch of times in a gitea issue. If the key
+is up to date, you can do the following:
+
+```console
+# Fetch gpg (unless you have it already)
+nix-shell -p gpg
+
+# Import oysteikts key to the gpg keychain
+gpg --import ./keys/oysteikt.pub
+```
+
+Now you should be able to run the `sops updatekeys` command again.

docs/users.md

@@ -0,0 +1,50 @@
+# User management
+
+Due to some complications with how NixOS creates users compared to how we used to
+create users with the salt-based setup, the NixOS machine users are created and
+managed separately. We tend to create users on-demand, whenever someone in PVV
+maintenance want to work on the NixOS machines.
+
+## Setting up a new user
+
+You can find the files for the existing users, and thereby examples of user files
+in the [`users`](../users) directory. When creating a new file here, you should name it
+`your-username.nix`, and add *at least* the following contents:
+
+```nix
+{ pkgs, ... }:
+{
+  users.users."<username>" = {
+    isNormalUser = true;
+    extraGroups = [
+      "wheel" # In case you wanna use sudo (you probably do)
+      "nix-builder-users" # Arbitrary access to write to the nix store
+    ];
+
+    # Any packages you frequently use to manage servers go here.
+    # Please don't pull gigantonormous packages here unless you
+    # absolutely need them, and remember that any package can be
+    # pulled via nix-shell if you only use it once in a blue moon.
+    packages = with pkgs; [
+      bottom
+      eza
+    ];
+
+    # Not strictly needed, but we recommend adding your public SSH
+    # key here. If it is not present, you will have to log into the
+    # machine as 'root' before setting your password for every NixOS
+    # machine you have not logged into yet.
+    openssh.authorizedKeys.keys = [
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIjiQ0wg4lpC7YBMAAHoGmgwqHOBi+EUz5mmCymGlIyT my-key"
+    ];
+  };
+}
+```
+
+The file will be picked up automatically, so creating the file and adding the
+contents should be enough to get you registered. You should
+[open a PR](https://docs.gitea.com/usage/issues-prs/pull-request) with the new
+code so the machines will be rebuilt with your user present.
+
+See also [Secret Management](./secret-management.md) for how to add your keys to the
+system that lets us add secrets (API keys, password, etc.) to the NixOS config.

flake.lock

@@ -1,5 +1,26 @@
 {
   "nodes": {
+    "devshell": {
+      "inputs": {
+        "nixpkgs": [
+          "nix-topology",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1728330715,
+        "narHash": "sha256-xRJ2nPOXb//u1jaBnDP56M7v5ldavjbtR6lfGqSvcKg=",
+        "owner": "numtide",
+        "repo": "devshell",
+        "rev": "dd6b80932022cea34a019e2bb32f6fa9e494dfef",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "devshell",
+        "type": "github"
+      }
+    },
     "disko": {
       "inputs": {
         "nixpkgs": [
@@ -7,19 +28,54 @@
         ]
       },
       "locked": {
-        "lastModified": 1741786315,
-        "narHash": "sha256-VT65AE2syHVj6v/DGB496bqBnu1PXrrzwlw07/Zpllc=",
+        "lastModified": 1736864502,
+        "narHash": "sha256-ItkIZyebGvNH2dK9jVGzJHGPtb6BSWLN8Gmef16NeY0=",
         "owner": "nix-community",
         "repo": "disko",
-        "rev": "0d8c6ad4a43906d14abd5c60e0ffe7b587b213de",
+        "rev": "0141aabed359f063de7413f80d906e1d98c0c123",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
+        "ref": "v1.11.0",
         "repo": "disko",
         "type": "github"
       }
     },
+    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1696426674,
+        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1726560853,
+        "narHash": "sha256-X6rJYSESBVr3hBoH0WbKE5KvhPU5bloyZ2L4K60/fPQ=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "c1dfcf08411b08f6b8615f7d8971a2bfa81d5e8a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
     "gergle": {
       "inputs": {
         "nixpkgs": [
@@ -27,19 +83,42 @@
         ]
       },
       "locked": {
-        "lastModified": 1736621371,
-        "narHash": "sha256-45UIQSQA7R5iU4YWvilo7mQbhY1Liql9bHBvYa3qRI0=",
-        "ref": "refs/heads/main",
-        "rev": "3729796c1213fe76e568ac28f1df8de4e596950b",
-        "revCount": 20,
+        "lastModified": 1764868579,
+        "narHash": "sha256-rfTUOIc0wnC4+19gLVfPbHfXx/ilfuUix6bWY+yaM2U=",
+        "ref": "main",
+        "rev": "9c923d1d50daa6a3b28c3214ad2300bfaf6c8fcd",
+        "revCount": 22,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/gergle.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/gergle.git"
       }
     },
+    "gitignore": {
+      "inputs": {
+        "nixpkgs": [
+          "nix-topology",
+          "pre-commit-hooks",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
     "greg-ng": {
       "inputs": {
         "nixpkgs": [
@@ -48,15 +127,16 @@
         "rust-overlay": "rust-overlay"
       },
       "locked": {
-        "lastModified": 1736545379,
-        "narHash": "sha256-PeTTmGumdOX3rd6OKI7QMCrZovCDkrckZbcHr+znxWA=",
-        "ref": "refs/heads/main",
-        "rev": "74f5316121776db2769385927ec0d0c2cc2b23e4",
-        "revCount": 42,
+        "lastModified": 1765760377,
+        "narHash": "sha256-2+lgzUjVas9hPSeWn52MwuX+iidMN4RkzkHo4vrGmR8=",
+        "ref": "main",
+        "rev": "f340dc5b9c9f3b75b7aca41f56f8869b9e28cf8c",
+        "revCount": 58,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/greg-ng.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/greg-ng.git"
       }
@@ -68,15 +148,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1736178795,
-        "narHash": "sha256-mPdi8cgvIDYcgG3FRG7A4BOIMu2Jef96TPMnV00uXlM=",
-        "ref": "refs/heads/master",
-        "rev": "fde738910de1fd8293535a6382c2f0c2749dd7c1",
-        "revCount": 79,
+        "lastModified": 1764867811,
+        "narHash": "sha256-UWHiwr8tIcGcVxMLvAdNxDbQ8QuHf3REHboyxvFkYEI=",
+        "ref": "master",
+        "rev": "c9983e947efe047ea9d6f97157a1f90e49d0eab3",
+        "revCount": 81,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git"
       },
       "original": {
+        "ref": "master",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git"
       }
@@ -88,31 +169,59 @@
         ]
       },
       "locked": {
-        "lastModified": 1735857245,
-        "narHash": "sha256-AKLLPrgXTxgzll3DqVUMa4QlPlRN3QceutgFBmEf8Nk=",
+        "lastModified": 1764844095,
+        "narHash": "sha256-Drf1orxsmFDzO+UbPo85gHjXW7QzAM+6oTPvI7vOSik=",
         "owner": "dali99",
         "repo": "nixos-matrix-modules",
-        "rev": "da9dc0479ffe22362793c87dc089035facf6ec4d",
+        "rev": "25b9f31ef1dbc3987b4c716de716239f2b283701",
         "type": "github"
       },
       "original": {
         "owner": "dali99",
-        "ref": "0.7.0",
+        "ref": "v0.8.0",
         "repo": "nixos-matrix-modules",
         "type": "github"
       }
     },
-    "minecraft-data": {
+    "minecraft-heatmap": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay_2"
+      },
       "locked": {
-        "lastModified": 1725277886,
-        "narHash": "sha256-Fw4VbbE3EfypQWSgPDFfvVH47BHeg3ptsO715NlUM8Q=",
-        "ref": "refs/heads/master",
-        "rev": "1b4087bd3322a2e2ba84271c8fcc013e6b641a58",
-        "revCount": 2,
+        "lastModified": 1766407405,
+        "narHash": "sha256-UEJ8F8/oG70biWRrGbL5/aB7OXzzvnYs+jxkR07UHvA=",
+        "ref": "main",
+        "rev": "e719840f72ca1b0cd169562a3a0de69899821de0",
+        "revCount": 16,
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git"
+      },
+      "original": {
+        "ref": "main",
+        "type": "git",
+        "url": "https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git"
+      }
+    },
+    "minecraft-kartverket": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1765904683,
+        "narHash": "sha256-uXM56y5n5GWpCiCNdKlTcCAy2IntgDB21c4gBDU30io=",
+        "ref": "main",
+        "rev": "6fae27b1659efb6774cf08a4e36ed29ab0e24105",
+        "revCount": 26,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git"
       }
@@ -124,48 +233,94 @@
         ]
       },
       "locked": {
-        "lastModified": 1736531400,
-        "narHash": "sha256-+X/HVI1AwoPcud28wI35XRrc1kDgkYdDUGABJBAkxDI=",
-        "ref": "refs/heads/main",
-        "rev": "e4dafd06b3d7e9e6e07617766e9c3743134571b7",
-        "revCount": 7,
+        "lastModified": 1743881366,
+        "narHash": "sha256-ScGA2IHPk9ugf9bqEZnp+YB/OJgrkZblnG/XLEKvJAo=",
+        "ref": "main",
+        "rev": "db2e4becf1b11e5dfd33de12a90a7d089fcf68ec",
+        "revCount": 11,
         "type": "git",
-        "url": "https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git"
+        "url": "https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
-        "url": "https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git"
+        "url": "https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git"
+      }
+    },
+    "nix-topology": {
+      "inputs": {
+        "devshell": "devshell",
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "pre-commit-hooks": "pre-commit-hooks"
+      },
+      "locked": {
+        "lastModified": 1765969653,
+        "narHash": "sha256-qVpQxyvdByeDfb+d+jhbyNna2Ie+w85iHpt4Qu0rv/E=",
+        "owner": "oddlama",
+        "repo": "nix-topology",
+        "rev": "0ed73e5a1b65eb8ed388d070ebe8dedb9182f466",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oddlama",
+        "ref": "main",
+        "repo": "nix-topology",
+        "type": "github"
       }
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1741969460,
-        "narHash": "sha256-SCNxTTBfMJV7XuTcLUfdAd6cgCGsazzi+DoPrceQrZ0=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "68612419aa6c9fd5b178b81e6fabbdf46d300ea4",
-        "type": "github"
+        "lastModified": 1767043167,
+        "narHash": "sha256-wN04/SL+8tV0D2HBIgt9dpX/03U18xoJ+8PT+dcn30E=",
+        "rev": "0b43a6ee07997a6e319e92dcbf276c2736506944",
+        "type": "tarball",
+        "url": "https://releases.nixos.org/nixos/25.11-small/nixos-25.11.2789.0b43a6ee0799/nixexprs.tar.xz"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "nixos-24.11-small",
-        "repo": "nixpkgs",
-        "type": "github"
+        "type": "tarball",
+        "url": "https://nixos.org/channels/nixos-25.11-small/nixexprs.tar.xz"
       }
     },
     "nixpkgs-unstable": {
       "locked": {
-        "lastModified": 1741960758,
-        "narHash": "sha256-pSGMbfkxF7TSeco54W+B1q+g22YCVp1qXHgtrdgtyR4=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "845dc1e9cbc2e48640b8968af58b4a19db67aa8f",
+        "lastModified": 1767031366,
+        "narHash": "sha256-SJz8tVEnXusU8OzN5ixAXQgzXv8fNIzp9ztzUyobh4s=",
+        "rev": "d23fedd87fcd067b1d160323fae0d0e4f995527d",
+        "type": "tarball",
+        "url": "https://releases.nixos.org/nixos/unstable-small/nixos-26.05pre918279.d23fedd87fcd/nixexprs.tar.xz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://nixos.org/channels/nixos-unstable-small/nixexprs.tar.xz"
+      }
+    },
+    "pre-commit-hooks": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "nix-topology",
+          "nixpkgs"
+        ],
+        "nixpkgs-stable": [
+          "nix-topology",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1730797577,
+        "narHash": "sha256-SrID5yVpyUfknUTGWgYkTyvdr9J1LxUym4om3SVGPkg=",
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "rev": "1864030ed24a2b8b4e4d386a5eeaf0c5369e50a9",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
-        "ref": "nixos-unstable-small",
-        "repo": "nixpkgs",
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
         "type": "github"
       }
     },
@@ -176,15 +331,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1723850344,
-        "narHash": "sha256-aT37O9l9eclWEnqxASVNBL1dKwDHZUOqdbA4VO9DJvw=",
-        "ref": "refs/heads/main",
-        "rev": "38b66677ab8c01aee10cd59e745af9ce3ea88092",
-        "revCount": 19,
+        "lastModified": 1764869785,
+        "narHash": "sha256-FGTIpC7gB4lbeL0bfYzn1Ge0PaCpd7VqWBLhJBx0i4A=",
+        "ref": "main",
+        "rev": "8ce7fb0b1918bdb3d1489a40d73895693955e8b2",
+        "revCount": 23,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/calendar-bot.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/calendar-bot.git"
       }
@@ -196,15 +352,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1741738148,
-        "narHash": "sha256-cJo6nbcJEOjkazkZ194NDnlsZe0W0wpxeUh2/886uC8=",
-        "ref": "refs/heads/main",
-        "rev": "c1802e7cf27c7cf8b4890354c982a4eef5b11593",
-        "revCount": 486,
+        "lastModified": 1767080188,
+        "narHash": "sha256-BmyPuWeSQ9XREyi0KSerWRfJndmyzHNJLysBJld/KwA=",
+        "ref": "main",
+        "rev": "08a216f4473e26aa2a5349e72633c0ab24e8ffbd",
+        "revCount": 534,
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/nettsiden.git"
       },
       "original": {
+        "ref": "main",
         "type": "git",
         "url": "https://git.pvv.ntnu.no/Projects/nettsiden.git"
       }
@@ -216,8 +373,10 @@
         "greg-ng": "greg-ng",
         "grzegorz-clients": "grzegorz-clients",
         "matrix-next": "matrix-next",
-        "minecraft-data": "minecraft-data",
+        "minecraft-heatmap": "minecraft-heatmap",
+        "minecraft-kartverket": "minecraft-kartverket",
         "nix-gitea-themes": "nix-gitea-themes",
+        "nix-topology": "nix-topology",
         "nixpkgs": "nixpkgs",
         "nixpkgs-unstable": "nixpkgs-unstable",
         "pvv-calendar-bot": "pvv-calendar-bot",
@@ -233,11 +392,32 @@
         ]
       },
       "locked": {
-        "lastModified": 1729391507,
-        "narHash": "sha256-as0I9xieJUHf7kiK2a9znDsVZQTFWhM1pLivII43Gi0=",
+        "lastModified": 1765680428,
+        "narHash": "sha256-fyPmRof9SZeI14ChPk5rVPOm7ISiiGkwGCunkhM+eUg=",
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "784981a9feeba406de38c1c9a3decf966d853cca",
+        "rev": "eb3898d8ef143d4bf0f7f2229105fc51c7731b2f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "minecraft-heatmap",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1766371695,
+        "narHash": "sha256-W7CX9vy7H2Jj3E8NI4djHyF8iHSxKpb2c/7uNQ/vGFU=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "d81285ba8199b00dc31847258cae3c655b605e8c",
         "type": "github"
       },
       "original": {
@@ -253,18 +433,34 @@
         ]
       },
       "locked": {
-        "lastModified": 1741861888,
-        "narHash": "sha256-ynOgXAyToeE1UdLNfrUn/hL7MN0OpIS2BtNdLjpjPf0=",
+        "lastModified": 1766894905,
+        "narHash": "sha256-pn8AxxfajqyR/Dmr1wnZYdUXHgM3u6z9x0Z1Ijmz2UQ=",
         "owner": "Mic92",
         "repo": "sops-nix",
-        "rev": "d016ce0365b87d848a57c12ffcfdc71da7a2b55f",
+        "rev": "61b39c7b657081c2adc91b75dd3ad8a91d6f07a7",
         "type": "github"
       },
       "original": {
         "owner": "Mic92",
+        "ref": "master",
         "repo": "sops-nix",
         "type": "github"
       }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
     }
   },
   "root": "root",

flake.nix

@@ -2,35 +2,42 @@
   description = "PVV System flake";
 
   inputs = {
-    nixpkgs.url = "github:NixOS/nixpkgs/nixos-24.11-small"; # remember to also update the url in base/services/auto-upgrade.nix
-    nixpkgs-unstable.url = "github:NixOS/nixpkgs/nixos-unstable-small";
+    nixpkgs.url = "https://nixos.org/channels/nixos-25.11-small/nixexprs.tar.xz";
+    nixpkgs-unstable.url = "https://nixos.org/channels/nixos-unstable-small/nixexprs.tar.xz";
 
-    sops-nix.url = "github:Mic92/sops-nix";
+    sops-nix.url = "github:Mic92/sops-nix/master";
     sops-nix.inputs.nixpkgs.follows = "nixpkgs";
 
-    disko.url = "github:nix-community/disko";
+    disko.url = "github:nix-community/disko/v1.11.0";
     disko.inputs.nixpkgs.follows = "nixpkgs";
 
-    pvv-nettsiden.url = "git+https://git.pvv.ntnu.no/Projects/nettsiden.git";
+    nix-topology.url = "github:oddlama/nix-topology/main";
+    nix-topology.inputs.nixpkgs.follows = "nixpkgs";
+
+    pvv-nettsiden.url = "git+https://git.pvv.ntnu.no/Projects/nettsiden.git?ref=main";
     pvv-nettsiden.inputs.nixpkgs.follows = "nixpkgs";
 
-    pvv-calendar-bot.url = "git+https://git.pvv.ntnu.no/Projects/calendar-bot.git";
+    pvv-calendar-bot.url = "git+https://git.pvv.ntnu.no/Projects/calendar-bot.git?ref=main";
     pvv-calendar-bot.inputs.nixpkgs.follows = "nixpkgs";
 
-    matrix-next.url = "github:dali99/nixos-matrix-modules/0.7.0";
+    matrix-next.url = "github:dali99/nixos-matrix-modules/v0.8.0";
     matrix-next.inputs.nixpkgs.follows = "nixpkgs";
 
-    nix-gitea-themes.url = "git+https://git.pvv.ntnu.no/oysteikt/nix-gitea-themes.git";
+    nix-gitea-themes.url = "git+https://git.pvv.ntnu.no/Drift/nix-gitea-themes.git?ref=main";
     nix-gitea-themes.inputs.nixpkgs.follows = "nixpkgs";
 
-    greg-ng.url = "git+https://git.pvv.ntnu.no/Grzegorz/greg-ng.git";
+    minecraft-heatmap.url = "git+https://git.pvv.ntnu.no/Projects/minecraft-heatmap.git?ref=main";
+    minecraft-heatmap.inputs.nixpkgs.follows = "nixpkgs";
+
+    greg-ng.url = "git+https://git.pvv.ntnu.no/Grzegorz/greg-ng.git?ref=main";
     greg-ng.inputs.nixpkgs.follows = "nixpkgs";
-    gergle.url = "git+https://git.pvv.ntnu.no/Grzegorz/gergle.git";
+    gergle.url = "git+https://git.pvv.ntnu.no/Grzegorz/gergle.git?ref=main";
     gergle.inputs.nixpkgs.follows = "nixpkgs";
-    grzegorz-clients.url = "git+https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git";
+    grzegorz-clients.url = "git+https://git.pvv.ntnu.no/Grzegorz/grzegorz-clients.git?ref=master";
     grzegorz-clients.inputs.nixpkgs.follows = "nixpkgs";
 
-    minecraft-data.url = "git+https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git";
+    minecraft-kartverket.url = "git+https://git.pvv.ntnu.no/Projects/minecraft-kartverket.git?ref=main";
+    minecraft-kartverket.inputs.nixpkgs.follows = "nixpkgs";
   };
 
   outputs = { self, nixpkgs, nixpkgs-unstable, sops-nix, disko, ... }@inputs:
@@ -53,42 +60,82 @@
   in {
     inputs = lib.mapAttrs (_: src: src.outPath) inputs;
 
+    pkgs = forAllSystems (system:
+      import nixpkgs {
+        inherit system;
+        config.allowUnfreePredicate = pkg: builtins.elem (lib.getName pkg)
+          [
+            "nvidia-x11"
+            "nvidia-settings"
+          ];
+      });
+
     nixosConfigurations = let
       unstablePkgs = nixpkgs-unstable.legacyPackages.x86_64-linux;
-      nixosConfig = nixpkgs: name: config: lib.nixosSystem (lib.recursiveUpdate
-        rec {
+
+      nixosConfig =
+        nixpkgs:
+        name:
+        configurationPath:
+        extraArgs:
+        lib.nixosSystem (lib.recursiveUpdate
+        (let
           system = "x86_64-linux";
+        in {
+          inherit system;
+
           specialArgs = {
             inherit unstablePkgs inputs;
             values = import ./values.nix;
             fp = path: ./${path};
-          };
+          } // extraArgs.specialArgs or { };
 
           modules = [
-            ./hosts/${name}/configuration.nix
+            configurationPath
             sops-nix.nixosModules.sops
-          ] ++ config.modules or [];
+          ] ++ extraArgs.modules or [];
 
           pkgs = import nixpkgs {
             inherit system;
+            config.allowUnfreePredicate = pkg: builtins.elem (lib.getName pkg)
+              [
+                "nvidia-x11"
+                "nvidia-settings"
+              ];
             overlays = [
               # Global overlays go here
-            ] ++ config.overlays or [ ];
+            ] ++ extraArgs.overlays or [ ];
           };
-        }
-        (removeAttrs config [ "modules" "overlays" ])
+        })
+        (builtins.removeAttrs extraArgs [
+          "modules"
+          "overlays"
+          "specialArgs"
+        ])
       );
 
-      stableNixosConfig = nixosConfig nixpkgs;
-      unstableNixosConfig = nixosConfig nixpkgs-unstable;
+      stableNixosConfig = name: extraArgs:
+          nixosConfig nixpkgs name ./hosts/${name}/configuration.nix extraArgs;
     in {
+      bakke = stableNixosConfig "bakke" {
+        modules = [
+          disko.nixosModules.disko
+        ];
+      };
       bicep = stableNixosConfig "bicep" {
         modules = [
           inputs.matrix-next.nixosModules.default
           inputs.pvv-calendar-bot.nixosModules.default
+          inputs.minecraft-heatmap.nixosModules.default
+          self.nixosModules.gickup
+          self.nixosModules.matrix-ooye
         ];
         overlays = [
-          inputs.pvv-calendar-bot.overlays.x86_64-linux.default
+          inputs.pvv-calendar-bot.overlays.default
+          inputs.minecraft-heatmap.overlays.default
+          (final: prev: {
+            inherit (self.packages.${prev.system}) out-of-your-element;
+          })
         ];
       };
       bekkalokk = stableNixosConfig "bekkalokk" {
@@ -103,17 +150,13 @@
         ];
         modules = [
           inputs.pvv-nettsiden.nixosModules.default
-        ];
-      };
-      bob = stableNixosConfig "bob" {
-        modules = [
-          disko.nixosModules.disko
-          { disko.devices.disk.disk1.device = "/dev/vda"; }
+          self.nixosModules.bluemap
         ];
       };
       ildkule = stableNixosConfig "ildkule" { };
       #ildkule-unstable = unstableNixosConfig "ildkule" { };
       shark = stableNixosConfig "shark" { };
+      wenche = stableNixosConfig "wenche" { };
 
       kommode = stableNixosConfig "kommode" {
         overlays = [
@@ -152,16 +195,37 @@
           inputs.gergle.overlays.default
         ];
       };
-    };
+    }
+    //
+    (let
+      machineNames = map (i: "lupine-${toString i}") (lib.range 1 5);
+      stableLupineNixosConfig = name: extraArgs:
+          nixosConfig nixpkgs name ./hosts/lupine/configuration.nix extraArgs;
+    in lib.genAttrs machineNames (name: stableLupineNixosConfig name {
+      modules = [{ networking.hostName = name; }];
+      specialArgs.lupineName = name;
+    }));
 
     nixosModules = {
+      bluemap = ./modules/bluemap.nix;
       snakeoil-certs = ./modules/snakeoil-certs.nix;
       snappymail = ./modules/snappymail.nix;
       robots-txt = ./modules/robots-txt.nix;
+      gickup = ./modules/gickup;
+      matrix-ooye = ./modules/matrix-ooye.nix;
     };
 
     devShells = forAllSystems (system: {
-      default = nixpkgs.legacyPackages.${system}.callPackage ./shell.nix { };
+      default = nixpkgs-unstable.legacyPackages.${system}.callPackage ./shell.nix { };
+      cuda = let
+        cuda-pkgs = import nixpkgs-unstable {
+          inherit system;
+          config = {
+            allowUnfree = true;
+            cudaSupport = true;
+          };
+        };
+      in cuda-pkgs.callPackage ./shells/cuda.nix { };
     });
 
     packages = {
@@ -176,14 +240,57 @@
 
         simplesamlphp = pkgs.callPackage ./packages/simplesamlphp { };
 
-      } //
+        bluemap = pkgs.callPackage ./packages/bluemap.nix { };
+
+        out-of-your-element = pkgs.callPackage ./packages/out-of-your-element.nix { };
+      }
+      //
+      # Mediawiki extensions
       (lib.pipe null [
         (_: pkgs.callPackage ./packages/mediawiki-extensions { })
         (lib.flip builtins.removeAttrs ["override" "overrideDerivation"])
         (lib.mapAttrs' (name: lib.nameValuePair "mediawiki-${name}"))
       ])
-      // lib.genAttrs allMachines
-        (machine: self.nixosConfigurations.${machine}.config.system.build.toplevel);
+      //
+      # Machines
+      lib.genAttrs allMachines
+        (machine: self.nixosConfigurations.${machine}.config.system.build.toplevel)
+      //
+      # Nix-topology
+      (let
+        topology' = import inputs.nix-topology {
+          pkgs = import nixpkgs {
+            system = "x86_64-linux";
+            overlays = [ inputs.nix-topology.overlays.default ];
+          };
+
+          specialArgs = {
+            values = import ./values.nix;
+          };
+
+          modules = [
+            ./topology
+            {
+              nixosConfigurations = lib.mapAttrs (_name: nixosCfg: nixosCfg.extendModules {
+                modules = [
+                  inputs.nix-topology.nixosModules.default
+                  ./topology/service-extractors/greg-ng.nix
+                ];
+              }) self.nixosConfigurations;
+            }
+          ];
+        };
+      in {
+        topology = topology'.config.output;
+        topology-png = pkgs.runCommand "pvv-config-topology-png" {
+          nativeBuildInputs = [ pkgs.writableTmpDirAsHomeHook ];
+        } ''
+          mkdir -p "$out"
+          for file in '${topology'.config.output}'/*.svg; do
+            ${lib.getExe pkgs.imagemagick} -density 300 -background none "$file" "$out"/"$(basename "''${file%.svg}.png")"
+          done
+        '';
+      });
     };
   };
 }

hosts/bakke/configuration.nix

@@ -0,0 +1,25 @@
+{ config, pkgs, values, ... }:
+{
+  imports = [
+      ./hardware-configuration.nix
+      ../../base
+      ./filesystems.nix
+    ];
+
+  sops.defaultSopsFile = ../../secrets/bakke/bakke.yaml;
+  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
+  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
+  sops.age.generateKey = true;
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "bakke";
+  networking.hostId = "99609ffc";
+  systemd.network.networks."30-enp2s0" = values.defaultNetworkConfig // {
+    matchConfig.Name = "enp2s0";
+    address = with values.hosts.bakke; [ (ipv4 + "/25") (ipv6 + "/64") ];
+  };
+
+  system.stateVersion = "24.05";
+}

hosts/bakke/disks.nix

@@ -0,0 +1,83 @@
+{
+  # https://github.com/nix-community/disko/blob/master/example/boot-raid1.nix
+  # Note: Disko was used to create the initial md raid, but is no longer in active use on this host.
+  disko.devices = {
+    disk = {
+      one = {
+        type = "disk";
+        device = "/dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E2EER6N6";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              size = "500M";
+              type = "EF00";
+              content = {
+                type = "mdraid";
+                name = "boot";
+              };
+            };
+            mdadm = {
+              size = "100%";
+              content = {
+                type = "mdraid";
+                name = "raid1";
+              };
+            };
+          };
+        };
+      };
+      two = {
+        type = "disk";
+        device = "/dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E7LPLU71";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              size = "500M";
+              type = "EF00";
+              content = {
+                type = "mdraid";
+                name = "boot";
+              };
+            };
+            mdadm = {
+              size = "100%";
+              content = {
+                type = "mdraid";
+                name = "raid1";
+              };
+            };
+          };
+        };
+      };
+    };
+    mdadm = {
+      boot = {
+        type = "mdadm";
+        level = 1;
+        metadata = "1.0";
+        content = {
+          type = "filesystem";
+          format = "vfat";
+          mountpoint = "/boot";
+        };
+      };
+      raid1 = {
+        type = "mdadm";
+        level = 1;
+        content = {
+          type = "gpt";
+          partitions.primary = {
+            size = "100%";
+            content = {
+              type = "filesystem";
+              format = "ext4";
+              mountpoint = "/";
+            };
+          };
+        };
+      };
+    };
+  };
+}

hosts/bakke/filesystems.nix

@@ -0,0 +1,26 @@
+{ config, pkgs, lib, ... }:
+{
+  # Boot drives:
+  boot.swraid.enable = true;
+
+  # ZFS Data pool:
+  environment.systemPackages = with pkgs; [ zfs ];
+  boot = {
+    zfs = {
+      extraPools = [ "tank" ];
+      requestEncryptionCredentials = false;
+    };
+    supportedFilesystems = [ "zfs" ];
+    kernelPackages = config.boot.zfs.package.latestCompatibleLinuxPackages;
+  };
+  services.zfs.autoScrub = {
+    enable = true;
+    interval = "Wed *-*-8..14 00:00:00";
+  };
+
+  # NFS Exports:
+  #TODO
+
+  # NFS Import mounts:
+  #TODO
+}

hosts/bakke/hardware-configuration.nix

@@ -0,0 +1,52 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ehci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=root" ];
+    };
+
+  fileSystems."/home" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=home" ];
+    };
+
+  fileSystems."/nix" =
+    { device = "/dev/disk/by-uuid/0f63c3d2-fc12-4ed5-a5a5-141bfd67a571";
+      fsType = "btrfs";
+      options = [ "subvol=nix" "noatime" ];
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/sdc2";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault false;
+  # networking.interfaces.eno1.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp2s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/bekkalokk/configuration.nix

@@ -4,11 +4,10 @@
     ./hardware-configuration.nix
 
     (fp /base)
-    (fp /misc/metrics-exporters.nix)
 
-    ./services/bluemap/default.nix
+    ./services/bluemap.nix
     ./services/idp-simplesamlphp
-    ./services/kerberos
+    ./services/kerberos.nix
     ./services/mediawiki
     ./services/nginx.nix
     ./services/phpfpm.nix

hosts/bekkalokk/services/bluemap.nix

@@ -0,0 +1,131 @@
+{ config, lib, pkgs, inputs, ... }:
+let
+  vanillaSurvival = "/var/lib/bluemap/vanilla_survival_world";
+  format = pkgs.formats.hocon { };
+in {
+  # NOTE: our versino of the module gets added in flake.nix
+  disabledModules = [ "services/web-apps/bluemap.nix" ];
+
+  sops.secrets."bluemap/ssh-key" = { };
+  sops.secrets."bluemap/ssh-known-hosts" = { };
+
+  services.bluemap = {
+    enable = true;
+
+    eula = true;
+    onCalendar = "*-*-* 05:45:00"; # a little over an hour after auto-upgrade
+
+    host = "minecraft.pvv.ntnu.no";
+
+    maps = let
+      inherit (inputs.minecraft-kartverket.packages.${pkgs.stdenv.hostPlatform.system}) bluemap-export;
+    in {
+      "verden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:overworld";
+          name = "Verden";
+          sorting = 0;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          ambient-light = 0.1;
+          cave-detection-ocean-floor = -5;
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude "${bluemap-export}/overworld.hocon") ];
+          };
+        };
+      };
+      "underverden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:the_nether";
+          name = "Underverden";
+          sorting = 100;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          sky-color = "#290000";
+          void-color = "#150000";
+          sky-light = 1;
+          ambient-light = 0.6;
+          remove-caves-below-y = -10000;
+          cave-detection-ocean-floor = -5;
+          cave-detection-uses-block-light = true;
+          render-mask = [{
+            max-y = 90;
+          }];
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude {
+              required = true;
+              type = "file";
+              value = "${bluemap-export}/nether.hocon";
+            }) ];
+          };
+        };
+      };
+      "enden" = {
+        settings = {
+          world = vanillaSurvival;
+          dimension = "minecraft:the_end";
+          name = "Enden";
+          sorting = 200;
+          start-pos = {
+            x = 0;
+            z = 0;
+          };
+          sky-color = "#080010";
+          void-color = "#080010";
+          sky-light = 1;
+          ambient-light = 0.6;
+          remove-caves-below-y = -10000;
+          cave-detection-ocean-floor = -5;
+          marker-sets = {
+            _includes = [ (format.lib.mkInclude "${bluemap-export}/the-end.hocon") ];
+          };
+        };
+      };
+    };
+  };
+
+  systemd.services."render-bluemap-maps" = {
+    serviceConfig = {
+      StateDirectory = [ "bluemap/world" ];
+      ExecStartPre = let
+        rsyncArgs = lib.cli.toCommandLineShellGNU { } {
+          archive = true;
+          compress = true;
+          verbose = true;
+          no-owner = true;
+          no-group = true;
+          rsh = "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=%d/ssh-known-hosts -i %d/sshkey";
+        };
+      in "${lib.getExe pkgs.rsync} ${rsyncArgs} root@innovation.pvv.ntnu.no:/ ${vanillaSurvival}";
+      LoadCredential = [
+        "sshkey:${config.sops.secrets."bluemap/ssh-key".path}"
+        "ssh-known-hosts:${config.sops.secrets."bluemap/ssh-known-hosts".path}"
+      ];
+    };
+  };
+
+  services.nginx.virtualHosts."minecraft.pvv.ntnu.no" = {
+    enableACME = true;
+    forceSSL = true;
+    kTLS = true;
+    http3 = true;
+    quic = true;
+    http3_hq = true;
+    extraConfig = ''
+      # Enabling QUIC 0-RTT
+      ssl_early_data on;
+
+      quic_gso on;
+      quic_retry on;
+      add_header Alt-Svc 'h3=":$server_port"; ma=86400';
+    '';
+  };
+
+  networking.firewall.allowedUDPPorts = [ 443 ];
+}

hosts/bekkalokk/services/bluemap/default.nix

@@ -1,85 +0,0 @@
-{ config, lib, pkgs, inputs, ... }:
-let
-  vanillaSurvival = "/var/lib/bluemap/vanilla_survival_world";
-in {
-  imports = [
-    ./module.nix # From danio, pending upstreaming
-  ];
-
-  disabledModules = [ "services/web-apps/bluemap.nix" ];
-
-  sops.secrets."bluemap/ssh-key" = { };
-  sops.secrets."bluemap/ssh-known-hosts" = { };
-
-  services.bluemap = {
-    enable = true;
-    package = pkgs.callPackage ./package.nix { };
-    
-    eula = true;
-    onCalendar = "*-*-* 05:45:00"; # a little over an hour after auto-upgrade
-
-    host = "minecraft.pvv.ntnu.no";
-
-    maps = {
-      "verden" = {
-        settings = {
-          world = vanillaSurvival;
-          sorting = 0;
-          ambient-light = 0.1;
-          cave-detection-ocean-floor = -5;
-          marker-sets = inputs.minecraft-data.map-markers.vanillaSurvival.verden;
-        };
-      };
-      "underverden" = {
-        settings = {
-          world = "${vanillaSurvival}/DIM-1";
-          sorting = 100;
-          sky-color = "#290000";
-          void-color = "#150000";
-          ambient-light = 0.6;
-          world-sky-light = 0;
-          remove-caves-below-y = -10000;
-          cave-detection-ocean-floor = -5;
-          cave-detection-uses-block-light = true;
-          max-y = 90;
-          marker-sets = inputs.minecraft-data.map-markers.vanillaSurvival.underverden;
-        };
-      };
-      "enden" = {
-        settings = {
-          world = "${vanillaSurvival}/DIM1";
-          sorting = 200;
-          sky-color = "#080010";
-          void-color = "#080010";
-          ambient-light = 0.6;
-          world-sky-light = 0;
-          remove-caves-below-y = -10000;
-          cave-detection-ocean-floor = -5;
-        };
-      };
-    };
-  };
-
-  services.nginx.virtualHosts."minecraft.pvv.ntnu.no" = {
-    enableACME = true;
-    forceSSL = true;
-  };
-
-  # TODO: render somewhere else lmao
-  systemd.services."render-bluemap-maps" = {
-    preStart = ''
-      mkdir -p /var/lib/bluemap/world
-      ${pkgs.rsync}/bin/rsync \
-        -e "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=$CREDENTIALS_DIRECTORY/ssh-known-hosts -i $CREDENTIALS_DIRECTORY/sshkey" \
-        -avz --no-owner --no-group \
-        root@innovation.pvv.ntnu.no:/ \
-        ${vanillaSurvival}
-    '';
-    serviceConfig = {
-      LoadCredential = [
-        "sshkey:${config.sops.secrets."bluemap/ssh-key".path}"
-        "ssh-known-hosts:${config.sops.secrets."bluemap/ssh-known-hosts".path}"
-      ];
-    };
-  };
-}

hosts/bekkalokk/services/bluemap/package.nix

@@ -1,30 +0,0 @@
-{ lib, stdenvNoCC, fetchurl, makeWrapper, jre }:
-
-stdenvNoCC.mkDerivation rec {
-  pname = "bluemap";
-  version = "5.7";
-
-  src = fetchurl {
-    url = "https://github.com/BlueMap-Minecraft/BlueMap/releases/download/v${version}/BlueMap-${version}-cli.jar";
-    hash = "sha256-8udZYJgrr4bi2mjRYrASd8JwUoUVZW1tZpOLRgafAIw=";
-  };
-
-  dontUnpack = true;
-
-  nativeBuildInputs = [ makeWrapper ];
-
-  installPhase = ''
-    runHook preInstall
-    makeWrapper ${jre}/bin/java $out/bin/bluemap --add-flags "-jar $src"
-    runHook postInstall
-  '';
-
-  meta = {
-    description = "3D minecraft map renderer";
-    homepage = "https://bluemap.bluecolored.de/";
-    sourceProvenance = with lib.sourceTypes; [ binaryBytecode ];
-    license = lib.licenses.mit;
-    maintainers = with lib.maintainers; [ dandellion h7x4 ];
-    mainProgram = "bluemap";
-  };
-}

hosts/bekkalokk/services/kerberos/krb5-conf-format.nix

@@ -1,88 +0,0 @@
-{ pkgs, lib, ... }:
-
-# Based on
-# - https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html
-# - https://manpages.debian.org/unstable/heimdal-docs/krb5.conf.5heimdal.en.html
-
-let
-  inherit (lib) boolToString concatMapStringsSep concatStringsSep filter
-    isAttrs isBool isList mapAttrsToList mdDoc mkOption singleton splitString;
-  inherit (lib.types) attrsOf bool coercedTo either int listOf oneOf path
-    str submodule;
-in
-{ }: {
-  type = let
-    section = attrsOf relation;
-    relation = either (attrsOf value) value;
-    value = either (listOf atom) atom;
-    atom = oneOf [int str bool];
-  in submodule {
-    freeformType = attrsOf section;
-    options = {
-      include = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Files to include in the Kerberos configuration.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-      includedir = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Directories containing files to include in the Kerberos configuration.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-      module = mkOption {
-        default = [ ];
-        description = mdDoc ''
-          Modules to obtain Kerberos configuration from.
-        '';
-        type = coercedTo path singleton (listOf path);
-      };
-    };
-  };
-
-  generate = let
-    indent = str: concatMapStringsSep "\n" (line: "  " + line) (splitString "\n" str);
-
-    formatToplevel = args @ {
-      include ? [ ],
-      includedir ? [ ],
-      module ? [ ],
-      ...
-    }: let
-      sections = removeAttrs args [ "include" "includedir" "module" ];
-    in concatStringsSep "\n" (filter (x: x != "") [
-      (concatStringsSep "\n" (mapAttrsToList formatSection sections))
-      (concatMapStringsSep "\n" (m: "module ${m}") module)
-      (concatMapStringsSep "\n" (i: "include ${i}") include)
-      (concatMapStringsSep "\n" (i: "includedir ${i}") includedir)
-    ]);
-
-    formatSection = name: section: ''
-      [${name}]
-      ${indent (concatStringsSep "\n" (mapAttrsToList formatRelation section))}
-    '';
-
-    formatRelation = name: relation:
-      if isAttrs relation
-      then ''
-        ${name} = {
-        ${indent (concatStringsSep "\n" (mapAttrsToList formatValue relation))}
-        }''
-      else formatValue name relation;
-
-    formatValue = name: value:
-      if isList value
-      then concatMapStringsSep "\n" (formatAtom name) value
-      else formatAtom name value;
-
-    formatAtom = name: atom: let
-      v = if isBool atom then boolToString atom else toString atom;
-    in "${name} = ${v}";
-  in
-    name: value: pkgs.writeText name ''
-      ${formatToplevel value}
-    '';
-}

hosts/bekkalokk/services/kerberos/krb5.nix

@@ -1,90 +0,0 @@
-{ config, lib, pkgs, ... }:
-let
-  inherit (lib) mdDoc mkIf mkOption mkPackageOption mkRemovedOptionModule;
-  inherit (lib.types) bool;
-
-  mkRemovedOptionModule' = name: reason: mkRemovedOptionModule ["krb5" name] reason;
-  mkRemovedOptionModuleCfg = name: mkRemovedOptionModule' name ''
-    The option `krb5.${name}' has been removed. Use
-    `security.krb5.settings.${name}' for structured configuration.
-  '';
-
-  cfg = config.security.krb5;
-  format = import ./krb5-conf-format.nix { inherit pkgs lib; } { };
-in {
-  imports = [
-    (mkRemovedOptionModuleCfg "libdefaults")
-    (mkRemovedOptionModuleCfg "realms")
-    (mkRemovedOptionModuleCfg "domain_realm")
-    (mkRemovedOptionModuleCfg "capaths")
-    (mkRemovedOptionModuleCfg "appdefaults")
-    (mkRemovedOptionModuleCfg "plugins")
-    (mkRemovedOptionModuleCfg "config")
-    (mkRemovedOptionModuleCfg "extraConfig")
-    (mkRemovedOptionModule' "kerberos" ''
-      The option `krb5.kerberos' has been moved to `security.krb5.package'.
-    '')
-  ];
-
-  options = {
-    security.krb5 = {
-      enable = mkOption {
-        default = false;
-        description = mdDoc "Enable and configure Kerberos utilities";
-        type = bool;
-      };
-
-      package = mkPackageOption pkgs "krb5" {
-        example = "heimdal";
-      };
-
-      settings = mkOption {
-        default = { };
-        type = format.type;
-        description = mdDoc ''
-          Structured contents of the {file}`krb5.conf` file. See
-          {manpage}`krb5.conf(5)` for details about configuration.
-        '';
-        example = {
-          include = [ "/run/secrets/secret-krb5.conf" ];
-          includedir = [ "/run/secrets/secret-krb5.conf.d" ];
-
-          libdefaults = {
-            default_realm = "ATHENA.MIT.EDU";
-          };
-
-          realms = {
-            "ATHENA.MIT.EDU" = {
-              admin_server = "athena.mit.edu";
-              kdc = [
-                "athena01.mit.edu"
-                "athena02.mit.edu"
-              ];
-            };
-          };
-
-          domain_realm = {
-            "mit.edu" = "ATHENA.MIT.EDU";
-          };
-
-          logging = {
-            kdc = "SYSLOG:NOTICE";
-            admin_server = "SYSLOG:NOTICE";
-            default = "SYSLOG:NOTICE";
-          };
-        };
-      };
-    };
-  };
-
-  config = mkIf cfg.enable {
-    environment = {
-      systemPackages = [ cfg.package ];
-      etc."krb5.conf".source = format.generate "krb5.conf" cfg.settings;
-    };
-  };
-
-  meta.maintainers = builtins.attrValues {
-    inherit (lib.maintainers) dblsaiko h7x4;
-  };
-}

hosts/bekkalokk/services/mediawiki/default.nix

@@ -130,6 +130,12 @@ in {
       $wgVectorDefaultSidebarVisibleForAnonymousUser = true;
       $wgVectorResponsive = true;
 
+      # Experimental dark mode support for Vector 2022
+      $wgVectorNightMode['beta'] = true;
+      $wgVectorNightMode['logged_out'] = true;
+      $wgVectorNightMode['logged_in'] = true;
+      $wgDefaultUserOptions['vector-theme'] = 'os';
+
       # Misc
       $wgEmergencyContact = "${cfg.passwordSender}";
       $wgUseTeX = false;
@@ -214,11 +220,11 @@ in {
       "= /favicon.ico".alias = pkgs.runCommandLocal "mediawiki-favicon.ico" {
         buildInputs = with pkgs; [ imagemagick ];
       } ''
-        convert \
+        magick \
+          ${fp /assets/logo_blue_regular.png} \
           -resize x64 \
           -gravity center \
           -crop 64x64+0+0 \
-          ${fp /assets/logo_blue_regular.png} \
           -flatten \
           -colors 256 \
           -background transparent \

hosts/bekkalokk/services/website/default.nix

@@ -18,11 +18,16 @@ in {
     restartUnits = [ "phpfpm-pvv-nettsiden.service" ];
   });
 
+  security.acme.certs."www.pvv.ntnu.no" = {
+    extraDomainNames = [
+      "pvv.ntnu.no"
+      "www.pvv.org"
+      "pvv.org"
+    ];
+  };
+
   services.idp.sp-remote-metadata = [
     "https://www.pvv.ntnu.no/simplesaml/"
-    "https://pvv.ntnu.no/simplesaml/"
-    "https://www.pvv.org/simplesaml/"
-    "https://pvv.org/simplesaml/"
   ];
 
   services.pvv-nettsiden = {
@@ -67,7 +72,9 @@ in {
         ADMIN_NAME = "PVV Drift";
         ADMIN_EMAIL = "drift@pvv.ntnu.no";
         ADMIN_PASSWORD = includeFromSops "simplesamlphp/admin_password";
-        TRUSTED_DOMAINS = [ cfg.domainName ];
+        TRUSTED_DOMAINS = [
+          "www.pvv.ntnu.no"
+        ];
       };
     };
   };
@@ -78,13 +85,28 @@ in {
     "catch_workers_output" = true;
   };
 
-  services.nginx.virtualHosts.${cfg.domainName} = {
-    serverAliases = [
-      "pvv.ntnu.no"
-      "www.pvv.org"
-      "pvv.org"
-    ];
+  services.nginx.virtualHosts."pvv.ntnu.no" = {
+    globalRedirect = cfg.domainName;
+    redirectCode = 307;
+    forceSSL = true;
+    useACMEHost = "www.pvv.ntnu.no";
+  };
 
+  services.nginx.virtualHosts."www.pvv.org" = {
+    globalRedirect = cfg.domainName;
+    redirectCode = 307;
+    forceSSL = true;
+    useACMEHost = "www.pvv.ntnu.no";
+  };
+
+  services.nginx.virtualHosts."pvv.org" = {
+    globalRedirect = cfg.domainName;
+    redirectCode = 307;
+    forceSSL = true;
+    useACMEHost = "www.pvv.ntnu.no";
+  };
+
+  services.nginx.virtualHosts.${cfg.domainName} = {
     locations = {
       # Proxy home directories
       "^~ /~" = {

hosts/bekkalokk/services/website/fetch-gallery.nix

@@ -53,7 +53,7 @@ in {
 
         echo "Creating thumbnail for $fname"
         mkdir -p $(dirname ".thumbnails/$fname")
-        convert -define jpeg:size=200x200 "$fname" -thumbnail 300 -auto-orient ".thumbnails/$fname.png" ||:
+        magick -define jpeg:size=200x200 "$fname" -thumbnail 300 -auto-orient ".thumbnails/$fname.png" ||:
         touch -m -d "$(date -R -r "$fname")" ".thumbnails/$fname.png"
       done <<< "$images"
     '';

hosts/bicep/configuration.nix

@@ -4,13 +4,13 @@
     ./hardware-configuration.nix
 
     (fp /base)
-    (fp /misc/metrics-exporters.nix)
     ./services/nginx
 
+    ./services/calendar-bot.nix
+    #./services/git-mirrors
+    ./services/minecraft-heatmap.nix
     ./services/mysql.nix
     ./services/postgres.nix
-    ./services/mysql.nix
-    ./services/calendar-bot.nix
 
     ./services/matrix
   ];
@@ -20,13 +20,15 @@
   sops.age.keyFile = "/var/lib/sops-nix/key.txt";
   sops.age.generateKey = true;
 
-  boot.loader.grub.enable = true;
-  boot.loader.grub.device = "/dev/disk/by-id/scsi-3600508b1001cb1a8751c137b30610682";
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
 
   networking.hostName = "bicep";
 
-  systemd.network.networks."30-enp6s0f0" = values.defaultNetworkConfig // {
-    matchConfig.Name = "enp6s0f0";
+  #systemd.network.networks."30-enp6s0f0" = values.defaultNetworkConfig // {
+  systemd.network.networks."30-ens18" = values.defaultNetworkConfig // {
+    #matchConfig.Name = "enp6s0f0";
+    matchConfig.Name = "ens18";
     address = with values.hosts.bicep; [ (ipv4 + "/25") (ipv6 + "/64") ]
       ++ (with values.services.turn; [ (ipv4 + "/25") (ipv6 + "/64") ]);
   };
@@ -37,6 +39,13 @@
   # There are no smart devices
   services.smartd.enable = false;
 
+  # we are a vm now
+  services.qemuGuest.enable = true;
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.sshguard.enable = true;
+
   # Do not change, even during upgrades.
   # See https://search.nixos.org/options?show=system.stateVersion
   system.stateVersion = "22.11";

hosts/bicep/hardware-configuration.nix

@@ -5,22 +5,29 @@
 
 {
   imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
+    [ (modulesPath + "/profiles/qemu-guest.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "uhci_hcd" "ehci_pci" "hpsa" "ohci_pci" "usbhid" "sd_mod" ];
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "ahci" "sd_mod" "sr_mod" ];
   boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-intel" ];
+  boot.kernelModules = [ ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" =
-    { device = "/dev/disk/by-uuid/31a67903-dc00-448a-a24a-36e820318fe5";
+    { device = "/dev/disk/by-uuid/20e06202-7a09-47cc-8ef6-5e7afe19453a";
       fsType = "ext4";
     };
 
+  # temp data disk, only 128gb not enough until we can add another disk to the system.
   fileSystems."/data" =
-    { device = "/dev/disk/by-uuid/79e93eed-ad95-45c9-b115-4ef92afcc8c0";
-      fsType = "f2fs";
+    { device = "/dev/disk/by-uuid/c81af266-0781-4084-b8eb-c2587cbcf1ba";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/198B-E363";
+      fsType = "vfat";
+      options = [ "fmask=0022" "dmask=0022" ];
     };
 
   swapDevices = [ ];
@@ -30,11 +37,7 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f0.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f1.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f2.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp6s0f3.useDHCP = lib.mkDefault true;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }

hosts/bicep/services/git-mirrors/default.nix

@@ -0,0 +1,100 @@
+{ config, pkgs, lib, fp, ... }:
+let
+  cfg = config.services.gickup;
+in
+{
+  sops.secrets."gickup/github-token" = {
+    owner = "gickup";
+  };
+
+  services.gickup = {
+    enable = true;
+
+    dataDir = "/data/gickup";
+
+    destinationSettings = {
+      structured = true;
+      zip = false;
+      keep = 10;
+      bare = true;
+      lfs = false;
+    };
+
+    instances = let
+      defaultGithubConfig = {
+        settings.token_file = config.sops.secrets."gickup/github-token".path;
+      };
+      defaultGitlabConfig = {
+        # settings.token_file = ...
+      };
+    in {
+      "github:Git-Mediawiki/Git-Mediawiki" = defaultGithubConfig;
+      "github:NixOS/nixpkgs" = defaultGithubConfig;
+      "github:go-gitea/gitea" = defaultGithubConfig;
+      "github:heimdal/heimdal" = defaultGithubConfig;
+      "github:saltstack/salt" = defaultGithubConfig;
+      "github:typst/typst" = defaultGithubConfig;
+      "github:unmojang/FjordLauncher" = defaultGithubConfig;
+      "github:unmojang/drasl" = defaultGithubConfig;
+      "github:yushijinhun/authlib-injector" = defaultGithubConfig;
+
+      "gitlab:mx-puppet/discord/better-discord.js" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/discord-markdown" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/matrix-discord-parser" = defaultGitlabConfig;
+      "gitlab:mx-puppet/discord/mx-puppet-discord" = defaultGitlabConfig;
+      "gitlab:mx-puppet/mx-puppet-bridge" = defaultGitlabConfig;
+
+      "any:glibc" = {
+        settings.url = "https://sourceware.org/git/glibc.git";
+      };
+
+      "any:out-of-your-element" = {
+        settings.url = "https://gitdab.com/cadence/out-of-your-element.git";
+      };
+
+      "any:out-of-your-element-module" = {
+        settings.url = "https://cgit.rory.gay/nix/OOYE-module.git";
+      };
+    };
+  };
+
+  services.cgit = let
+    domain = "mirrors.pvv.ntnu.no";
+  in {
+    ${domain} = {
+      enable = true;
+      package = pkgs.callPackage (fp /packages/cgit.nix) { };
+      group = "gickup";
+      scanPath = "${cfg.dataDir}/linktree";
+      settings = {
+        enable-commit-graph = true;
+        enable-follow-links = true;
+        enable-http-clone = true;
+        enable-remote-branches = true;
+        clone-url = "https://${domain}/$CGIT_REPO_URL";
+        remove-suffix = true;
+        root-title = "PVVSPPP";
+        root-desc = "PVV Speiler Praktisk og Prominent Programvare";
+        snapshots = "all";
+        logo = "/PVV-logo.png";
+      };
+    };
+  };
+
+  services.nginx.virtualHosts."mirrors.pvv.ntnu.no" = {
+    forceSSL = true;
+    enableACME = true;
+
+    locations."= /PVV-logo.png".alias = let
+      small-pvv-logo = pkgs.runCommandLocal "pvv-logo-96x96" {
+        nativeBuildInputs = [ pkgs.imagemagick ];
+      } ''
+        magick '${fp /assets/logo_blue_regular.svg}' -resize 96x96 PNG:"$out"
+      '';
+    in toString small-pvv-logo;
+  };
+
+  systemd.services."fcgiwrap-cgit-mirrors.pvv.ntnu.no" = {
+    serviceConfig.BindReadOnlyPaths = [ cfg.dataDir ];
+  };
+}

hosts/bicep/services/matrix/coturn.nix

@@ -6,12 +6,14 @@
     key = "synapse/turnconfig";
     owner = config.users.users.matrix-synapse.name;
     group = config.users.users.matrix-synapse.group;
+    restartUnits = [ "coturn.service" ];
   };
   sops.secrets."matrix/coturn/static-auth-secret" = {
     sopsFile = fp /secrets/bicep/matrix.yaml;
     key = "coturn/static-auth-secret";
     owner = config.users.users.turnserver.name;
     group = config.users.users.turnserver.group;
+    restartUnits = [ "coturn.service" ];
   };
 
   services.matrix-synapse-next = {
@@ -42,7 +44,7 @@
 
   security.acme.certs.${config.services.coturn.realm} = {
     email = "drift@pvv.ntnu.no";
-    listenHTTP = "129.241.210.213:80";
+    listenHTTP = "${values.services.turn.ipv4}:80";
     reloadServices = [ "coturn.service" ];
   };
 

hosts/bicep/services/matrix/default.nix

@@ -9,7 +9,8 @@
     ./coturn.nix
     ./mjolnir.nix
 
-    ./discord.nix
+    # ./discord.nix
+    ./out-of-your-element.nix
     ./hookshot
   ];
 

hosts/bicep/services/matrix/discord.nix

@@ -45,7 +45,7 @@ in
   };
 
 
-  services.mx-puppet-discord.enable = true;
+  services.mx-puppet-discord.enable = false;
   services.mx-puppet-discord.settings = {
     bridge = {
       bindAddress = "localhost";

hosts/bicep/services/matrix/hookshot/default.nix

@@ -18,6 +18,7 @@ in
   sops.templates."hookshot-registration.yaml" = {
     owner = config.users.users.matrix-synapse.name;
     group = config.users.groups.keys-matrix-registrations.name;
+    restartUnits = [ "matrix-hookshot.service" ];
     content = ''
       id: matrix-hookshot
       as_token: "${config.sops.placeholder."matrix/hookshot/as_token"}"
@@ -77,7 +78,7 @@ in
         outbound = true;
         urlPrefix = "https://hookshot.pvv.ntnu.no/webhook/";
         userIdPrefix = "_webhooks_";
-        allowJsTransformationFunctions = false;
+        allowJsTransformationFunctions = true;
         waitForComplete = false;
       };
       feeds = {
@@ -94,6 +95,11 @@ in
         }
       ];
 
+      widgets = {
+        roomSetupWidget.addOnInvite = false;
+        publicUrl = "https://hookshot.pvv.ntnu.no/widgetapi/v1/static";
+      };
+
       permissions = [
         # Users of the PVV Server
         { actor = "pvv.ntnu.no";
@@ -128,6 +134,7 @@ in
 
   services.nginx.virtualHosts."hookshot.pvv.ntnu.no" = {
     enableACME = true;
+    addSSL = true;
     locations."/" = {
       proxyPass = "http://${webhookListenAddress}:${toString webhookListenPort}";
     };

hosts/bicep/services/matrix/mjolnir.nix

@@ -6,6 +6,7 @@
     key = "mjolnir/access_token";
     owner = config.users.users.mjolnir.name;
     group = config.users.users.mjolnir.group;
+    restartUnits = [ "mjolnir.service" ];
   };
 
   services.mjolnir = {

hosts/bicep/services/matrix/out-of-your-element.nix

@@ -0,0 +1,70 @@
+{ config, pkgs, fp, ... }:
+let
+  cfg = config.services.matrix-ooye;
+in
+{
+  users.groups.keys-matrix-registrations = { };
+
+  sops.secrets = {
+    "matrix/ooye/as_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/as_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/hs_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/hs_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/discord_token" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/discord_token";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+    "matrix/ooye/discord_client_secret" = {
+      sopsFile = fp /secrets/bicep/matrix.yaml;
+      key = "ooye/discord_client_secret";
+      restartUnits = [ "matrix-ooye.service" ];
+    };
+  };
+
+  services.matrix-ooye = {
+    enable = true;
+    homeserver = "https://matrix.pvv.ntnu.no";
+    homeserverName = "pvv.ntnu.no";
+    discordTokenPath = config.sops.secrets."matrix/ooye/discord_token".path;
+    discordClientSecretPath = config.sops.secrets."matrix/ooye/discord_client_secret".path;
+    bridgeOrigin = "https://ooye.pvv.ntnu.no";
+
+    enableSynapseIntegration = false;
+  };
+
+  systemd.services."matrix-synapse" = {
+    after = [
+      "matrix-ooye-pre-start.service"
+      "network-online.target"
+    ];
+    requires = [ "matrix-ooye-pre-start.service" ];
+    serviceConfig = {
+      LoadCredential = [
+        "matrix-ooye-registration:/var/lib/matrix-ooye/registration.yaml"
+      ];
+      ExecStartPre = [
+        "+${pkgs.coreutils}/bin/cp /run/credentials/matrix-synapse.service/matrix-ooye-registration ${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+        "+${pkgs.coreutils}/bin/chown matrix-synapse:keys-matrix-registrations ${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+      ];
+    };
+  };
+
+  services.matrix-synapse-next.settings = {
+    app_service_config_files = [
+      "${config.services.matrix-synapse-next.dataDir}/ooye-registration.yaml"
+    ];
+  };
+
+  services.nginx.virtualHosts."ooye.pvv.ntnu.no" = {
+    forceSSL = true;
+    enableACME = true;
+    locations."/".proxyPass = "http://localhost:${cfg.socket}";
+  };
+}

hosts/bicep/services/matrix/smtp-authenticator/default.nix

@@ -1,4 +1,4 @@
-{ lib, buildPythonPackage, fetchFromGitHub }:
+{ lib, buildPythonPackage, fetchFromGitHub, setuptools }:
 
 buildPythonPackage rec {
   pname = "matrix-synapse-smtp-auth";
@@ -6,6 +6,9 @@ buildPythonPackage rec {
 
   src = ./.;
 
+  pyproject = true;
+  build-system = [ setuptools ];
+
   doCheck = false;
 
   meta = with lib; {

hosts/bicep/services/matrix/synapse.nix

@@ -124,8 +124,8 @@ in {
         "fec0::/10"
 
         # NTNU
-        "129.241.0.0/16"
-        "2001:700:300::/44"
+        values.ntnu.ipv4-space
+        values.ntnu.ipv6-space
       ];
     };
   };

hosts/bicep/services/minecraft-heatmap.nix

@@ -0,0 +1,49 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.minecraft-heatmap;
+in
+{
+  sops.secrets."minecraft-heatmap/ssh-key/private" = {
+    mode = "600";
+  };
+
+  sops.secrets."minecraft-heatmap/postgres-passwd" = {
+    mode = "600";
+  };
+
+  services.minecraft-heatmap = {
+    enable = true;
+    database = {
+      host = "postgres.pvv.ntnu.no";
+      port = 5432;
+      name = "minecraft_heatmap";
+      user = "minecraft_heatmap";
+      passwordFile = config.sops.secrets."minecraft-heatmap/postgres-passwd".path;
+    };
+  };
+
+  systemd.services.minecraft-heatmap-ingest-logs = {
+    serviceConfig.LoadCredential = [
+      "sshkey:${config.sops.secrets."minecraft-heatmap/ssh-key/private".path}"
+    ];
+
+    preStart = let
+      knownHostsFile = pkgs.writeText "minecraft-heatmap-known-hosts" ''
+        innovation.pvv.ntnu.no ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE9O/y5uqcLKCodg2Q+XfZPH/AoUIyBlDhigImU+4+Kn
+        innovation.pvv.ntnu.no ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQClR9GvWeVPZHudlnFXhGHUX5sGX9nscsOsotnlQ4uVuGsgvRifsVsuDULlAFXwoV1tYp4vnyXlsVtMddpLI5ANOIDcZ4fgDxpfSQmtHKssNpDcfMhFJbfRVyacipjA4osxTxvLox/yjtVt+URjTHUA1MWzEwc26KfiOvWO5tCBTan7doN/4KOyT05GwBxwzUAwUmoGTacIITck2Y9qp4+xFYqehbXqPdBb15hFyd38OCQhtU1hWV2Yi18+hJ4nyjc/g5pr6mW09ULlFghe/BaTUXrTisYC6bMcJZsTDwsvld9581KPvoNZOTQhZPTEQCZZ1h54fe0ZHuveVB3TIHovZyjoUuaf4uiFOjJVaKRB+Ig+Il6r7tMUn9CyHtus/Nd86E0TFBzoKxM0OFu88oaUlDtZVrUJL5En1lGoimajebb1JPxllFN5hqIT+gVyMY6nRzkcfS7ieny/U4rzXY2rfz98selftgh3LsBywwADv65i+mPw1A/1QdND1R6fV4U=
+        innovation.pvv.ntnu.no ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNjl3HfsDqmALWCL9uhz9k93RAD2565ndBqUh4N/rvI7MCwEJ6iRCdDev0YzB1Fpg24oriyYoxZRP24ifC2sQf8=
+      '';
+    in ''
+      mkdir -p '${cfg.minecraftLogsDir}'
+      "${lib.getExe pkgs.rsync}" \
+      --archive \
+      --verbose \
+      --progress \
+      --no-owner \
+      --no-group \
+      --rsh="${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=\"${knownHostsFile}\" -i \"$CREDENTIALS_DIRECTORY\"/sshkey" \
+      root@innovation.pvv.ntnu.no:/ \
+      '${cfg.minecraftLogsDir}'/
+    '';
+  };
+}

hosts/bicep/services/mysql.nix

@@ -48,6 +48,8 @@
     IPAddressAllow = [
       values.ipv4-space
       values.ipv6-space
+      values.hosts.ildkule.ipv4
+      values.hosts.ildkule.ipv6
     ];
   };
 }

hosts/bicep/services/postgres.nix

@@ -1,15 +1,15 @@
-{ config, pkgs, ... }:
+{ config, pkgs, values, ... }:
 {
   services.postgresql = {
     enable = true;
     package = pkgs.postgresql_15;
     enableTCPIP = true;
 
-    dataDir = "/data/postgresql";
-
     authentication = ''
-      host all all 129.241.210.128/25 md5
-      host all all 2001:700:300:1900::/64 md5
+      host all all ${values.ipv4-space} md5
+      host all all ${values.ipv6-space} md5
+      host all all ${values.hosts.ildkule.ipv4}/32 md5
+      host all all ${values.hosts.ildkule.ipv6}/32 md5
     '';
 
     # Hilsen https://pgconfigurator.cybertec-postgresql.com/
@@ -74,11 +74,40 @@
     };
   };
 
-  systemd.services.postgresql.serviceConfig = {
-    LoadCredential = [
-      "cert:/etc/certs/postgres.crt"
-      "key:/etc/certs/postgres.key"
+  systemd.tmpfiles.settings."10-postgresql"."/data/postgresql".d = {
+    user = config.systemd.services.postgresql.serviceConfig.User;
+    group = config.systemd.services.postgresql.serviceConfig.Group;
+    mode = "0700";
+  };
+
+  systemd.services.postgresql-setup = {
+    after = [
+      "systemd-tmpfiles-setup.service"
+      "systemd-tmpfiles-resetup.service"
     ];
+    serviceConfig = {
+      LoadCredential = [
+        "cert:/etc/certs/postgres.crt"
+        "key:/etc/certs/postgres.key"
+      ];
+
+      BindPaths = [ "/data/postgresql:/var/lib/postgresql" ];
+    };
+  };
+
+  systemd.services.postgresql = {
+    after = [
+      "systemd-tmpfiles-setup.service"
+      "systemd-tmpfiles-resetup.service"
+    ];
+    serviceConfig = {
+      LoadCredential = [
+        "cert:/etc/certs/postgres.crt"
+        "key:/etc/certs/postgres.key"
+      ];
+
+      BindPaths = [ "/data/postgresql:/var/lib/postgresql" ];
+    };
   };
 
   environment.snakeoil-certs."/etc/certs/postgres" = {

hosts/bob/configuration.nix

@@ -1,46 +0,0 @@
-{ config, fp, pkgs, values, ... }:
-{
-  imports = [
-      # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-      (fp /base)
-      (fp /misc/metrics-exporters.nix)
-      ./disks.nix
-
-      (fp /misc/builder.nix)
-    ];
-
-  sops.defaultSopsFile = fp /secrets/bob/bob.yaml;
-  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
-  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
-  sops.age.generateKey = true;
-
-  boot.loader.grub = {
-    enable = true;
-    efiSupport = true;
-    efiInstallAsRemovable = true;
-  };
-
-  networking.hostName = "bob"; # Define your hostname.
-
-  systemd.network.networks."30-all" = values.defaultNetworkConfig // {
-    matchConfig.Name = "en*";
-    DHCP = "yes";
-    gateway = [ ];
-  };
-
-  # List packages installed in system profile
-  environment.systemPackages = with pkgs; [
-  ];
-
-  # List services that you want to enable:
-
-  # This value determines the NixOS release from which the default
-  # settings for stateful data, like file locations and database versions
-  # on your system were taken. It‘s perfectly fine and recommended to leave
-  # this value at the release version of the first install of this system.
-  # Before changing this value read the documentation for this option
-  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "23.05"; # Did you read the comment?
-
-}

hosts/bob/disks.nix

@@ -1,39 +0,0 @@
-# Example to create a bios compatible gpt partition
-{ lib, ... }:
-{
-  disko.devices = {
-    disk.disk1 = {
-      device = lib.mkDefault "/dev/sda";
-      type = "disk";
-      content = {
-        type = "gpt";
-        partitions = {
-          boot = {
-            name = "boot";
-            size = "1M";
-            type = "EF02";
-          };
-          esp = {
-            name = "ESP";
-            size = "500M";
-            type = "EF00";
-            content = {
-              type = "filesystem";
-              format = "vfat";
-              mountpoint = "/boot";
-            };
-          };
-          root = {
-            name = "root";
-            size = "100%";
-            content = {
-              type = "filesystem";
-              format = "ext4";
-              mountpoint = "/";
-            };
-          };
-        };
-      };
-    };
-  };
-}

hosts/brzeczyszczykiewicz/configuration.nix

@@ -4,7 +4,6 @@
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
       (fp /base)
-      (fp /misc/metrics-exporters.nix)
 
       ./services/grzegorz.nix
     ];

hosts/georg/configuration.nix

@@ -4,7 +4,6 @@
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
       (fp /base)
-      (fp /misc/metrics-exporters.nix)
 
       (fp /modules/grzegorz.nix)
     ];
@@ -25,6 +24,26 @@
 
   # List services that you want to enable:
 
+
+
+  services.spotifyd = {
+    enable = true;
+    settings.global = {
+      device_name = "georg";
+      use_mpris = false;
+      #dbus_type = "system";
+      #zeroconf_port = 1234;
+    };
+  };
+
+  networking.firewall.allowedTCPPorts = [
+    # config.services.spotifyd.settings.zeroconf_port
+    5353 # spotifyd is its own mDNS service wtf
+  ];
+
+
+
+
   # This value determines the NixOS release from which the default
   # settings for stateful data, like file locations and database versions
   # on your system were taken. It‘s perfectly fine and recommended to leave

hosts/ildkule/configuration.nix

@@ -4,7 +4,6 @@
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
       (fp /base)
-      (fp /misc/metrics-exporters.nix)
 
       ./services/monitoring
       ./services/nginx

hosts/ildkule/services/monitoring/prometheus/default.nix

@@ -2,11 +2,12 @@
   stateDir = "/data/monitoring/prometheus";
 in {
   imports = [
+    ./exim.nix
     ./gitea.nix
+    ./machines.nix
     ./matrix-synapse.nix
     ./mysqld.nix
     ./postgres.nix
-    ./machines.nix
   ];
 
   services.prometheus = {

hosts/ildkule/services/monitoring/prometheus/exim.nix

@@ -0,0 +1,14 @@
+{ ... }:
+{
+  services.prometheus = {
+    scrapeConfigs = [
+      {
+        job_name = "exim";
+        scrape_interval = "15s";
+        static_configs = [{
+          targets = [ "microbel.pvv.ntnu.no:9636" ];
+        }];
+      }
+    ];
+  };
+}

hosts/ildkule/services/monitoring/prometheus/machines.nix

@@ -1,66 +1,37 @@
 { config, ... }: let
   cfg = config.services.prometheus;
+
+  mkHostScrapeConfig = name: ports: {
+    labels.hostname = name;
+    targets = map (port: "${name}.pvv.ntnu.no:${toString port}") ports;
+  };
+
+  defaultNodeExporterPort = 9100;
+  defaultSystemdExporterPort = 9101;
+  defaultNixosExporterPort = 9102;
 in {
   services.prometheus.scrapeConfigs = [{
     job_name = "base_info";
     static_configs = [
-      { labels.hostname = "ildkule";
-        targets = [
-          "ildkule.pvv.ntnu.no:${toString cfg.exporters.node.port}"
-          "ildkule.pvv.ntnu.no:${toString cfg.exporters.systemd.port}"
-        ];
-      }
-      { labels.hostname = "bekkalokk";
-        targets = [
-          "bekkalokk.pvv.ntnu.no:9100"
-          "bekkalokk.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname = "kommode";
-        targets = [
-          "kommode.pvv.ntnu.no:9100"
-          "kommode.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname = "bicep";
-        targets = [
-          "bicep.pvv.ntnu.no:9100"
-          "bicep.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname = "brzeczyszczykiewicz";
-        targets = [
-          "brzeczyszczykiewicz.pvv.ntnu.no:9100"
-          "brzeczyszczykiewicz.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname = "georg";
-        targets = [
-          "georg.pvv.ntnu.no:9100"
-          "georg.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname = "ustetind";
-        targets = [
-          "ustetind.pvv.ntnu.no:9100"
-          "ustetind.pvv.ntnu.no:9101"
-        ];
-      }
-      { labels.hostname =  "hildring";
-        targets = [
-          "hildring.pvv.ntnu.no:9100"
-        ];
-      }
-      { labels.hostname =  "isvegg";
-        targets = [
-          "isvegg.pvv.ntnu.no:9100"
-        ];
-      }
-      { labels.hostname =  "microbel";
-        targets = [
-          "microbel.pvv.ntnu.no:9100"
-        ];
-      }
+      (mkHostScrapeConfig "ildkule" [ cfg.exporters.node.port cfg.exporters.systemd.port defaultNixosExporterPort ])
+
+      (mkHostScrapeConfig "bekkalokk" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "bicep" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "brzeczyszczykiewicz" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "georg" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "kommode" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "ustetind" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "wenche" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+
+      (mkHostScrapeConfig "lupine-1" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      # (mkHostScrapeConfig "lupine-2" [ defaultNodeExporterPort defaultSystemdExporterPort ])
+      (mkHostScrapeConfig "lupine-3" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "lupine-4" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+      (mkHostScrapeConfig "lupine-5" [ defaultNodeExporterPort defaultSystemdExporterPort defaultNixosExporterPort ])
+
+      (mkHostScrapeConfig "hildring" [ defaultNodeExporterPort ])
+      (mkHostScrapeConfig "isvegg" [ defaultNodeExporterPort ])
+      (mkHostScrapeConfig "microbel" [ defaultNodeExporterPort ])
     ];
   }];
 }

hosts/ildkule/services/monitoring/prometheus/mysqld.nix

@@ -10,7 +10,7 @@ in {
         inherit (config.sops) placeholder;
       in ''
         [client]
-        host = bicep.pvv.ntnu.no
+        host = mysql.pvv.ntnu.no
         port = 3306
         user = prometheus_mysqld_exporter
         password = ${placeholder."config/mysqld_exporter_password"}

hosts/kommode/configuration.nix

@@ -4,7 +4,6 @@
     # Include the results of the hardware scan.
     ./hardware-configuration.nix
     (fp /base)
-    (fp /misc/metrics-exporters.nix)
 
     ./services/gitea
     ./services/nginx.nix
@@ -31,4 +30,3 @@
 
   system.stateVersion = "24.11";
 }
-

hosts/kommode/services/gitea/customization/default.nix

@@ -3,7 +3,12 @@ let
   cfg = config.services.gitea;
 in
 {
-  services.gitea-themes.monokai = pkgs.gitea-theme-monokai;
+  services.gitea-themes = {
+    monokai = pkgs.gitea-theme-monokai;
+    earl-grey = pkgs.gitea-theme-earl-grey;
+    pitch-black = pkgs.gitea-theme-pitch-black;
+    catppuccin = pkgs.gitea-theme-catppuccin;
+  };
 
   systemd.services.gitea-customization = lib.mkIf cfg.enable {
     description = "Install extra customization in gitea's CUSTOM_DIR";
@@ -19,10 +24,15 @@ in
     script = let
       logo-svg = fp /assets/logo_blue_regular.svg;
       logo-png = fp /assets/logo_blue_regular.png;
+
       extraLinks = pkgs.writeText "gitea-extra-links.tmpl" ''
+        <a class="item" href="https://git.pvv.ntnu.no/Drift/-/projects/4">Tokyo Drift Issues</a>
+      '';
+
+      extraLinksFooter = pkgs.writeText "gitea-extra-links-footer.tmpl" ''
         <a class="item" href="https://www.pvv.ntnu.no/">PVV</a>
         <a class="item" href="https://wiki.pvv.ntnu.no/">Wiki</a>
-        <a class="item" href="https://git.pvv.ntnu.no/Drift/-/projects/4">Tokyo Drift Issues</a>
+        <a class="item" href="https://wiki.pvv.ntnu.no/wiki/Tjenester/Kodelager">PVV Gitea Howto</a>
       '';
 
       project-labels = (pkgs.formats.yaml { }).generate "gitea-project-labels.yaml" {
@@ -37,17 +47,14 @@ in
       } ''
         # Bigger icons
         install -Dm444 "${cfg.package.src}/templates/repo/icon.tmpl" "$out/repo/icon.tmpl"
-        sed -i -e 's/24/48/g' "$out/repo/icon.tmpl"
-
-        # Show license in list view
-        patch -i ${./licenses-in-repo-list.diff} "${cfg.package.src}/templates/explore/repo_list.tmpl" -o repo_list.tmpl
-        install -Dm444 repo_list.tmpl "$out/explore/repo_list.tmpl"
+        sed -i -e 's/24/60/g' "$out/repo/icon.tmpl"
       '';
     in ''
       install -Dm444 ${logo-svg} ${cfg.customDir}/public/assets/img/logo.svg
       install -Dm444 ${logo-png} ${cfg.customDir}/public/assets/img/logo.png
       install -Dm444 ${./loading.apng} ${cfg.customDir}/public/assets/img/loading.png
       install -Dm444 ${extraLinks} ${cfg.customDir}/templates/custom/extra_links.tmpl
+      install -Dm444 ${extraLinksFooter} ${cfg.customDir}/templates/custom/extra_links_footer.tmpl
       install -Dm444 ${project-labels} ${cfg.customDir}/options/label/project-labels.yaml
 
       "${lib.getExe pkgs.rsync}" -a "${customTemplates}/" ${cfg.customDir}/templates/

hosts/kommode/services/gitea/customization/licenses-in-repo-list.diff

@@ -1,6 +0,0 @@
-33a34,38
-> 						{{if .DetectedRepoLicenses}}
-> 							<a class="flex-text-inline" href="{{.RepoLink}}/src/{{.Repository.DefaultBranch}}/{{PathEscapeSegments .LicenseFileName}}" title="{{StringUtils.Join .DetectedRepoLicenses ", "}}">
-> 								{{svg "octicon-law"}} {{if eq (len .DetectedRepoLicenses) 1}}{{index .DetectedRepoLicenses 0}}{{else}}{{ctx.Locale.Tr "repo.multiple_licenses"}}{{end}}
-> 							</a>
-> 						{{end}}

hosts/kommode/services/gitea/default.nix

@@ -1,4 +1,4 @@
-{ config, values, lib, unstablePkgs, ... }:
+{ config, values, lib, pkgs, unstablePkgs, ... }:
 let
   cfg = config.services.gitea;
   domain = "git.pvv.ntnu.no";
@@ -11,15 +11,18 @@ in {
     ./web-secret-provider
   ];
 
-  sops.secrets = {
-    "gitea/database" = {
-      owner = "gitea";
-      group = "gitea";
-    };
-    "gitea/email-password" = {
+  sops.secrets = let
+    defaultConfig = {
       owner = "gitea";
       group = "gitea";
+      restartUnits = [ "gitea.service" ];
     };
+  in {
+    "gitea/database" = defaultConfig;
+    "gitea/email-password" = defaultConfig;
+    "gitea/lfs-jwt-secret" = defaultConfig;
+    "gitea/oauth2-jwt-secret" = defaultConfig;
+    "gitea/secret-key" = defaultConfig;
   };
 
   services.gitea = {
@@ -45,9 +48,19 @@ in {
         ROOT_URL = "https://${domain}/";
         PROTOCOL = "http+unix";
         SSH_PORT = sshPort;
+        LANDING_PAGE = "explore";
         START_SSH_SERVER = true;
         START_LFS_SERVER = true;
-        LANDING_PAGE = "explore";
+        LFS_JWT_SECRET = lib.mkForce "";
+        LFS_JWT_SECRET_URI = "file:${config.sops.secrets."gitea/lfs-jwt-secret".path}";
+      };
+      oauth2 = {
+        JWT_SECRET = lib.mkForce "";
+        JWT_SECRET_URI = "file:${config.sops.secrets."gitea/oauth2-jwt-secret".path}";
+      };
+      "git.timeout" = {
+        MIGRATE = 3600;
+        MIRROR = 1800;
       };
       mailer = {
         ENABLED = true;
@@ -71,6 +84,10 @@ in {
       };
       admin.DEFAULT_EMAIL_NOTIFICATIONS = "onmention";
       session.COOKIE_SECURE = true;
+      security = {
+        SECRET_KEY = lib.mkForce "";
+        SECRET_KEY_URI = "file:${config.sops.secrets."gitea/secret-key".path}";
+      };
       database.LOG_SQL = false;
       repository = {
         PREFERRED_LICENSES = lib.concatStringsSep "," [
@@ -105,6 +122,10 @@ in {
       picture = {
         DISABLE_GRAVATAR = true;
         ENABLE_FEDERATED_AVATAR = false;
+
+        AVATAR_MAX_FILE_SIZE = 1024 * 1024 * 5;
+        # NOTE: go any bigger than this, and gitea will freeze your gif >:(
+        AVATAR_MAX_ORIGIN_SIZE = 1024 * 1024 * 2;
       };
       actions.ENABLED = true;
       ui = {
@@ -136,6 +157,7 @@ in {
 
     dump = {
       enable = true;
+      interval = "weekly";
       type = "tar.gz";
     };
   };
@@ -144,6 +166,11 @@ in {
 
   systemd.services.gitea.serviceConfig.CPUSchedulingPolicy = "batch";
 
+  systemd.services.gitea.serviceConfig.CacheDirectory = "gitea/repo-archive";
+  systemd.services.gitea.serviceConfig.BindPaths = [
+    "%C/gitea/repo-archive:${cfg.stateDir}/data/repo-archive"
+  ];
+
   services.nginx.virtualHosts."${domain}" = {
     forceSSL = true;
     enableACME = true;
@@ -167,4 +194,31 @@ in {
   };
 
   networking.firewall.allowedTCPPorts = [ sshPort ];
+
+  systemd.services.gitea-dump = {
+    serviceConfig.ExecStart = let
+      args = lib.cli.toGNUCommandLineShell { } {
+        type = cfg.dump.type;
+
+        # This should be declarative on nixos, no need to backup.
+        skip-custom-dir = true;
+
+        # This can be regenerated, no need to backup
+        skip-index = true;
+
+        # Logs are stored in the systemd journal
+        skip-log = true;
+      };
+    in lib.mkForce "${lib.getExe cfg.package} ${args}";
+
+    # Only keep n backup files at a time
+    postStop = let
+      cu = prog: "'${lib.getExe' pkgs.coreutils prog}'";
+      backupCount = 3;
+    in ''
+      for file in $(${cu "ls"} -t1 '${cfg.dump.backupDir}' | ${cu "sort"} --reverse | ${cu "tail"} -n+${toString (backupCount + 1)}); do
+        ${cu "rm"} "$file"
+      done
+      '';
+  };
 }

hosts/kommode/services/gitea/gpg.nix

@@ -4,9 +4,23 @@ let
   GNUPGHOME = "${config.users.users.gitea.home}/gnupg";
 in
 {
-  sops.secrets."gitea/gpg-signing-key" = {
-    owner = cfg.user;
-    inherit (cfg) group;
+  sops.secrets = {
+    "gitea/gpg-signing-key-public" = {
+      owner = cfg.user;
+      inherit (cfg) group;
+      restartUnits = [
+        "gitea.service"
+        "gitea-ensure-gnupg-homedir.service"
+      ];
+    };
+    "gitea/gpg-signing-key-private" = {
+      owner = cfg.user;
+      inherit (cfg) group;
+      restartUnits = [
+        "gitea.service"
+        "gitea-ensure-gnupg-homedir.service"
+      ];
+    };
   };
 
   systemd.services.gitea.environment = { inherit GNUPGHOME; };
@@ -18,6 +32,7 @@ in
 
   systemd.services.gitea-ensure-gnupg-homedir = {
     description = "Import gpg key for gitea";
+    before = [ "gitea.service" ];
     environment = { inherit GNUPGHOME; };
     serviceConfig = {
       Type = "oneshot";
@@ -25,7 +40,8 @@ in
       PrivateNetwork = true;
     };
     script = ''
-      ${lib.getExe pkgs.gnupg} --import ${config.sops.secrets."gitea/gpg-signing-key".path}
+      ${lib.getExe pkgs.gnupg} --import ${config.sops.secrets."gitea/gpg-signing-key-public".path}
+      ${lib.getExe pkgs.gnupg} --import ${config.sops.secrets."gitea/gpg-signing-key-private".path}
     '';
   };
 
@@ -34,5 +50,6 @@ in
     SIGNING_NAME = "PVV Git";
     SIGNING_EMAIL = "gitea@git.pvv.ntnu.no";
     INITIAL_COMMIT = "always";
+    WIKI = "always";
   };
 }

hosts/kommode/services/gitea/import-users/default.nix

@@ -11,7 +11,8 @@ in
 
   systemd.services.gitea-import-users = lib.mkIf cfg.enable {
     enable = true;
-    preStart=''${pkgs.rsync}/bin/rsync -e "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=$CREDENTIALS_DIRECTORY/ssh-known-hosts -i $CREDENTIALS_DIRECTORY/sshkey" -a pvv@smtp.pvv.ntnu.no:/etc/passwd /tmp/passwd-import'';
+    preStart=''${pkgs.rsync}/bin/rsync -e "${pkgs.openssh}/bin/ssh -o UserKnownHostsFile=$CREDENTIALS_DIRECTORY/ssh-known-hosts -i $CREDENTIALS_DIRECTORY/sshkey" -a pvv@smtp.pvv.ntnu.no:/etc/passwd /run/gitea-import-users/passwd'';
+    environment.PASSWD_FILE_PATH = "/run/gitea-import-users/passwd";
     serviceConfig = {
       ExecStart = pkgs.writers.writePython3 "gitea-import-users" {
         flakeIgnore = [
@@ -25,6 +26,7 @@ in
       ];
       DynamicUser="yes";
       EnvironmentFile=config.sops.secrets."gitea/import-user-env".path;
+      RuntimeDirectory = "gitea-import-users";
     };
   };
 

hosts/kommode/services/gitea/import-users/gitea-import-users.py

@@ -17,6 +17,10 @@ GITEA_API_URL = os.getenv('GITEA_API_URL')
 if GITEA_API_URL is None:
     GITEA_API_URL = 'https://git.pvv.ntnu.no/api/v1'
 
+PASSWD_FILE_PATH = os.getenv('PASSWD_FILE_PATH')
+if PASSWD_FILE_PATH is None:
+    PASSWD_FILE_PATH = '/tmp/passwd-import'
+
 
 def gitea_list_all_users() -> dict[str, dict[str, any]] | None:
     r = requests.get(
@@ -187,7 +191,8 @@ def main():
     if existing_users is None:
         exit(1)
 
-    for username, name in passwd_file_parser("/tmp/passwd-import"):
+    print(f"Reading passwd entries from {PASSWD_FILE_PATH}")
+    for username, name in passwd_file_parser(PASSWD_FILE_PATH):
         print(f"Processing {username}")
         add_or_patch_gitea_user(username, name, existing_users)
         for org, team_name in COMMON_USER_TEAMS:

hosts/lupine/configuration.nix

@@ -0,0 +1,34 @@
+{ fp, values, lupineName, ... }:
+{
+  imports = [
+    ./hardware-configuration/${lupineName}.nix
+
+    (fp /base)
+
+    ./services/gitea-runner.nix
+  ];
+
+  sops.defaultSopsFile = fp /secrets/lupine/lupine.yaml;
+  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
+  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
+  sops.age.generateKey = true;
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  systemd.network.networks."30-enp0s31f6" = values.defaultNetworkConfig // {
+    matchConfig.Name = "enp0s31f6";
+    address = with values.hosts.${lupineName}; [ (ipv4 + "/25") (ipv6 + "/64") ];
+    networkConfig.LLDP = false;
+  };
+  systemd.network.wait-online = {
+    anyInterface = true;
+  };
+
+  # There are no smart devices
+  services.smartd.enable = false;
+
+  # Do not change, even during upgrades.
+  # See https://search.nixos.org/options?show=system.stateVersion
+  system.stateVersion = "25.05";
+}

hosts/lupine/hardware-configuration/lupine-1.nix

@@ -0,0 +1,40 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/a949e2e8-d973-4925-83e4-bcd815e65af7";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/81D6-38D3";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/82c2d7fa-7cd0-4398-8cf6-c892bc56264b"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/lupine/hardware-configuration/lupine-2.nix

@@ -0,0 +1,40 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/aa81d439-800b-403d-ac10-9d2aac3619d0";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/4A34-6AE5";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/efb7cd0c-c1ae-4a86-8bc2-8e7fd0066650"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/lupine/hardware-configuration/lupine-3.nix

@@ -0,0 +1,40 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/39ba059b-3205-4701-a832-e72c0122cb88";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/63FA-297B";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/9c72eb54-ea8c-4b09-808a-8be9b9a33869"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/lupine/hardware-configuration/lupine-4.nix

@@ -5,20 +5,30 @@
 
 {
   imports =
-    [ (modulesPath + "/profiles/qemu-guest.nix")
+    [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "virtio_blk" ];
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "sd_mod" ];
   boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
   boot.extraModulePackages = [ ];
 
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/c7bbb293-a0a3-4995-8892-0ec63e8c67dd";
+      fsType = "ext4";
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/a86ffda8-8ecb-42a1-bf9f-926072e90ca5"; }
+    ];
+
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
   # (the default) this is the recommended approach. When using systemd-networkd it's
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.ens3.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }

hosts/lupine/hardware-configuration/lupine-5.nix

@@ -0,0 +1,40 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/5f8418ad-8ec1-4f9e-939e-f3a4c36ef343";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/F372-37DF";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices =
+    [ { device = "/dev/disk/by-uuid/27bf292d-bbb3-48c4-a86e-456e0f1f648f"; }
+    ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}

hosts/lupine/services/gitea-runner.nix

@@ -0,0 +1,71 @@
+{ config, lupineName, ... }:
+{
+  # This is unfortunately state, and has to be generated one at a time :(
+  # To do that, comment out all except one of the runners, fill in its token
+  # inside the sops file, rebuild the system, and only after this runner has
+  # successfully registered will gitea give you the next token.
+  # - oysteikt Sep 2023
+  sops = {
+    secrets."gitea/runners/token" = {
+      key = "gitea/runners/${lupineName}";
+    };
+
+    templates."gitea-runner-envfile" = {
+      restartUnits = [
+        "gitea-runner-${lupineName}.service"
+      ];
+      content = ''
+        TOKEN="${config.sops.placeholder."gitea/runners/token"}"
+      '';
+    };
+  };
+
+  services.gitea-actions-runner.instances = {
+    ${lupineName} = {
+      enable = true;
+      name = "git-runner-${lupineName}";
+      url = "https://git.pvv.ntnu.no";
+      # NOTE: gitea actions runners need node inside their docker images,
+      #       so we are a bit limited here.
+      labels = [
+        "debian-latest:docker://node:current-trixie"
+        "debian-trixie:docker://node:current-trixie"
+        "debian-bookworm:docker://node:current-bookworm"
+        "debian-bullseye:docker://node:current-bullseye"
+
+        "debian-latest-slim:docker://node:current-trixie-slim"
+        "debian-trixie-slim:docker://node:current-trixie-slim"
+        "debian-bookworm-slim:docker://node:current-bookworm-slim"
+        "debian-bullseye-slim:docker://node:current-bullseye-slim"
+
+        "alpine-latest:docker://node:current-alpine"
+        "alpine-3.22:docker://node:current-alpine3.22"
+        "alpine-3.21:docker://node:current-alpine3.21"
+
+        # See https://gitea.com/gitea/runner-images
+        "ubuntu-latest:docker://docker.gitea.com/runner-images:ubuntu-latest"
+        "ubuntu-24.04:docker://docker.gitea.com/runner-images:ubuntu-24.04"
+        "ubuntu-noble:docker://docker.gitea.com/runner-images:ubuntu-24.04"
+        "ubuntu-22.04:docker://docker.gitea.com/runner-images:ubuntu-22.04"
+        "ubuntu-jammy:docker://docker.gitea.com/runner-images:ubuntu-22.04"
+
+        "ubuntu-latest-slim:docker://docker.gitea.com/runner-images:ubuntu-latest-slim"
+        "ubuntu-24.04-slim:docker://docker.gitea.com/runner-images:ubuntu-24.04-slim"
+        "ubuntu-noble-slim:docker://docker.gitea.com/runner-images:ubuntu-24.04-slim"
+        "ubuntu-22.04-slim:docker://docker.gitea.com/runner-images:ubuntu-22.04-slim"
+        "ubuntu-jammy-slim:docker://docker.gitea.com/runner-images:ubuntu-22.04-slim"
+      ];
+      tokenFile = config.sops.templates."gitea-runner-envfile".path;
+    };
+  };
+
+  virtualisation.podman = {
+    enable = true;
+    defaultNetwork.settings.dns_enabled = true;
+    autoPrune.enable = true;
+  };
+
+  networking.dhcpcd.IPv6rs = false;
+
+  networking.firewall.interfaces."podman+".allowedUDPPorts = [53 5353];
+}

hosts/shark/configuration.nix

@@ -4,7 +4,6 @@
       # Include the results of the hardware scan.
       ./hardware-configuration.nix
       (fp /base)
-      (fp /misc/metrics-exporters.nix)
     ];
 
   sops.defaultSopsFile = fp /secrets/shark/shark.yaml;

hosts/ustetind/configuration.nix

@@ -3,7 +3,6 @@
 {
   imports = [
     (fp /base)
-    (fp /misc/metrics-exporters.nix)
 
     ./services/gitea-runners.nix
   ];

hosts/wenche/configuration.nix

@@ -0,0 +1,44 @@
+{ config, fp, pkgs, values, lib, ... }:
+{
+  imports = [
+      # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      (fp /base)
+    ];
+
+  nix.settings.trusted-users = [ "@nix-builder-users" ];
+  nix.daemonCPUSchedPolicy = "batch";
+
+  boot.binfmt.emulatedSystems = [
+    "aarch64-linux"
+    "armv7l-linux"
+  ];
+
+  sops.defaultSopsFile = fp /secrets/wenche/wenche.yaml;
+  sops.age.sshKeyPaths = [ "/etc/ssh/ssh_host_ed25519_key" ];
+  sops.age.keyFile = "/var/lib/sops-nix/key.txt";
+  sops.age.generateKey = true;
+
+  boot.loader.grub.device = "/dev/sda";
+
+  networking.hostName = "wenche"; # Define your hostname.
+
+  systemd.network.networks."30-ens18" = values.defaultNetworkConfig // {
+    matchConfig.Name = "ens18";
+    address = with values.hosts.wenche; [ (ipv4 + "/25") (ipv6 + "/64") ];
+  };
+
+  hardware.graphics.enable = true;
+  services.xserver.videoDrivers = [ "nvidia" ];
+  hardware.nvidia = {
+    modesetting.enable = true;
+    open = false;
+    package = config.boot.kernelPackages.nvidiaPackages.production;
+  };
+
+  # List packages installed in system profile
+  environment.systemPackages = with pkgs; [
+  ];
+
+  system.stateVersion = "24.11"; # Did you read the comment?
+}

hosts/wenche/hardware-configuration.nix

@@ -0,0 +1,27 @@
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "virtio_scsi" "sd_mod" "sr_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "nvidia"  ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/4e8ecdd2-d453-4fff-b952-f06da00f3b85";
+      fsType = "ext4";
+    };
+
+  swapDevices = [ {
+    device = "/var/lib/swapfile";
+    size = 16*1024;
+  } ];
+
+  networking.useDHCP = lib.mkDefault false;
+  # networking.interfaces.ens18.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+}

justfile

@@ -1,25 +1,56 @@
+set positional-arguments # makes variables accesible as $1 $2 $@
 export GUM_FILTER_HEIGHT := "15"
-nom := `if command -v nom >/dev/null; then echo nom; else echo nix; fi`
+nom := `if [[ -t 1 ]] && command -v nom >/dev/null; then echo nom; else echo nix; fi`
+nix_eval_opts := "--log-format raw --option warn-dirty false"
 
 @_default:
   just "$(gum choose --ordered --header "Pick a recipie..." $(just --summary --unsorted))"
 
-check:
-  nix flake check --keep-going
+check *_:
+  nix flake check --keep-going "$@"
 
-build-machine machine=`just _a_machine`:
-  {{nom}} build .#nixosConfigurations.{{ machine }}.config.system.build.toplevel
+build-machine machine=`just _a_machine` *_:
+  {{nom}} build .#nixosConfigurations.{{ machine }}.config.system.build.toplevel "${@:2}"
 
-run-vm machine=`just _a_machine`:
-  nixos-rebuild build-vm --flake .#{{ machine }}
+run-vm machine=`just _a_machine` *_:
+  nixos-rebuild build-vm --flake .#{{ machine }} "${@:2}"
   QEMU_NET_OPTS="hostfwd=tcp::8080-:80,hostfwd=tcp::8081-:443,hostfwd=tcp::2222-:22" ./result/bin/run-*-vm
 
-@update-inputs:
-  nix eval .#inputs --apply builtins.attrNames --json \
-    | jq '.[]' -r \
-    | gum choose --no-limit --height=15 \
-    | xargs -L 1 nix flake lock --update-input
+@update-inputs *_:
+  @git reset flake.lock
+  @git restore flake.lock
+  nix eval {{nix_eval_opts}} --file flake.nix --apply 'x: builtins.attrNames x.inputs' --json \
+    | { printf "%s\n" --commit-lock-file; jq '.[]' -r | grep -vxF "self" ||:; } \
+    | gum choose --no-limit --header "Choose extra arguments:" \
+    | tee >(xargs -d'\n' echo + nix flake update "$@" >&2) \
+    | xargs -d'\n' nix flake update "$@"
+
+@repl $machine=`just _a_machine` *_:
+  set -v; nixos-rebuild --flake .#"$machine" repl "${@:2}"
+
+@eval $machine=`just _a_machine` $attrpath="system.build.toplevel.outPath" *_:
+  set -v; nix eval {{nix_eval_opts}} ".#nixosConfigurations.\"$machine\".config.$attrpath" --show-trace "${@:3}"
+
+@eval-vm $machine=`just _a_machine` $attrpath="system.build.toplevel.outPath" *_:
+  just eval "$machine" "virtualisation.vmVariant.$attrpath" "${@:3}"
 
 
+# helpers
+
+[no-exit-message]
 _a_machine:
-  nix eval .#nixosConfigurations --apply builtins.attrNames --json | jq .[] -r | gum filter
+  #!/usr/bin/env -S sh -euo pipefail
+  machines="$(
+    nix eval {{nix_eval_opts}} .#nixosConfigurations --apply builtins.attrNames --json | jq .[] -r
+  )"
+  [ -n "$machines" ] || { echo >&2 "ERROR: no machines found"; false; }
+  if [ -s .direnv/vars/last-machine.txt ]; then
+    machines="$(
+      grep <<<"$machines" -xF  "$(cat .direnv/vars/last-machine.txt)" ||:
+      grep <<<"$machines" -xFv "$(cat .direnv/vars/last-machine.txt)" ||:
+    )"
+  fi
+  choice="$(gum filter <<<"$machines")"
+  mkdir -p .direnv/vars
+  cat <<<"$choice" >.direnv/vars/last-machine.txt
+  cat <<<"$choice"

keys/oysteikt.pub

@@ -26,29 +26,40 @@ eJAiipB0QOH9SEa5Io6BSiqsBQJmqp4CBQkFpUs7AIF2IAQZFgoAHRYhBPPNqGzF
 Wp8Q16BpgZ8vfYJQ81FGBQJi5oZHAAoJEJ8vfYJQ81FGFZgBALN+Rh4m323TaM5z
 dJfCTV7V0aP3J0RdKmtKvz/Y9a7uAP4oP8UlbM9ucyG252gZ8IjM0VprNzP9CpNl
 4GzpD4CRDgkQRrkijoFKKqwYoQEAz0D3G/dD6DBYBf7p6pGYqXd2X0Dv8nmnalol
-Z6SxfUMA/jT/XjPh7c4Ui8nZO7XDzYWrbV/eZwGMd1zXq2mU42MLuQINBGLmhnoB
-EADa1yBK0NKxVIto3hSh21hooYpWcEXWqMPXHO34rcAhktVFOOHIl2bFGScQAZXt
-jAcqUmMyC+PMs1DZoocFk+9PJt17hAa/s6CRrw8vK+1fVqhj0XOLtevGV9iC6IRv
-hPxzTsOaeOssgMGIU8xDmMKT2nGHGNUkqOXGld63E3NKsK3lnl+BCdpJ0f3GEB7a
-SQ+pk6k1uzODXX/mhAUJmL1MkVZ6jJA3vhsre0Kfa9p+C5mP4hLJ6jF+oESvA4HC
-+LuCSGm66gIDMC39jnLo6hwYEEjfPXD7CUAN4S2eISSFd+ZclN2vYcrKYgsCZS0h
-BFOgDhKKCHBuMwP12AIM8y8L64/eOWFpR7s2StAPjjYbZeZECHLWZt1zGVvkS7Xp
-6lsAg6/T8EysKG7vTl2Qq9W0BmzNgk2ODTZkhv0gqqXppdr8eRiq+h0qMfJptG0G
-ycOvqb9PoEO2dfNCjjII8VfaSGfSEYo8UwsqYTtfgdoNnFCXKd1r7QmvrdbNsFDR
-mkv+wWJoipwUaVquyb2KN652jSlpwMECW6fSEsT/5C3mJLgAmi6l6yosw6HdIY6j
-gpCGtxnHW2zReIS6ezZdtxYBCkEHK70yASyaIHrLLDknw+DuKvXAWOAecob8GNBH
-OjXZe3LzBt2rVgOCRa+W7milNgjUCsz+R3rM8XfR+wNEGwARAQABiH4EGBYKACYW
-IQT303iQIoqQdEDh/UhGuSKOgUoqrAUCYuaGegIbDAUJA8JnAAAKCRBGuSKOgUoq
-rDE0AQDBxRsmW9L60mxGCp1CpNWBXD2T6D605PlNiNCcM+cOCgD/c2OitSSG50M0
-YRbyh1LPYL6YQePL0dQkYsjm6XVmrAKIfgQYFgoAJgIbDBYhBPfTeJAiipB0QOH9
-SEa5Io6BSiqsBQJmqp4FBQkFpUsIAAoJEEa5Io6BSiqsydsA/ihBulpSSLg4B9pJ
-sffqphMht7yT3Dnz57iexUEgj3jBAQDedI+gwpZlMjV6IdH/Epz244j82Ta04cqk
-SOz2Y63LBrgzBGLmhsUWCSsGAQQB2kcPAQEHQFg/avgj0sZbxqL58tZEpcaieeL1
-OWOoVU3mZX/K7GU+iH4EGBYKACYWIQT303iQIoqQdEDh/UhGuSKOgUoqrAUCYuaG
-xQIbIAUJA8JnAAAKCRBGuSKOgUoqrN5jAP96aO0MEPQSIKdLaa9+ilpPp+glJ9du
-IJ7zdR0U15tONAEA0WqeRc8Jhv10UjIz/Q3UlcfvKPzVW6yVKo+Lg1FI2QSIfgQY
-FgoAJgIbIBYhBPfTeJAiipB0QOH9SEa5Io6BSiqsBQJmqp4GBQkFpUq9AAoJEEa5
-Io6BSiqsjF0BAJn0EBEJfszskYiZzMshFHW5k0QUF+Ak3JNh2UG+M6FJAQCQVY/l
-DkrvOytuFnKbkDrCaTrtLh/JAmBXpSERIejmDw==
-=7cFp
+Z6SxfUMA/jT/XjPh7c4Ui8nZO7XDzYWrbV/eZwGMd1zXq2mU42MLiPUEGBYKACYC
+GwIWIQT303iQIoqQdEDh/UhGuSKOgUoqrAUCaI6lzgUJCWqGhwCBdiAEGRYKAB0W
+IQTzzahsxVqfENegaYGfL32CUPNRRgUCYuaGRwAKCRCfL32CUPNRRhWYAQCzfkYe
+Jt9t02jOc3SXwk1e1dGj9ydEXSprSr8/2PWu7gD+KD/FJWzPbnMhtudoGfCIzNFa
+azcz/QqTZeBs6Q+AkQ4JEEa5Io6BSiqsCG0BALDNFlploZWjQ0Xn3B9fd+1sTUmY
++e0s95lEY7XqVkF2AQCkKzMd2mHsymyVtY32bSsZ0iJxHTmxomS0uQ/TGIugB7kC
+DQRi5oZ6ARAA2tcgStDSsVSLaN4UodtYaKGKVnBF1qjD1xzt+K3AIZLVRTjhyJdm
+xRknEAGV7YwHKlJjMgvjzLNQ2aKHBZPvTybde4QGv7Ogka8PLyvtX1aoY9Fzi7Xr
+xlfYguiEb4T8c07DmnjrLIDBiFPMQ5jCk9pxhxjVJKjlxpXetxNzSrCt5Z5fgQna
+SdH9xhAe2kkPqZOpNbszg11/5oQFCZi9TJFWeoyQN74bK3tCn2vafguZj+ISyeox
+fqBErwOBwvi7gkhpuuoCAzAt/Y5y6OocGBBI3z1w+wlADeEtniEkhXfmXJTdr2HK
+ymILAmUtIQRToA4SighwbjMD9dgCDPMvC+uP3jlhaUe7NkrQD442G2XmRAhy1mbd
+cxlb5Eu16epbAIOv0/BMrChu705dkKvVtAZszYJNjg02ZIb9IKql6aXa/HkYqvod
+KjHyabRtBsnDr6m/T6BDtnXzQo4yCPFX2khn0hGKPFMLKmE7X4HaDZxQlynda+0J
+r63WzbBQ0ZpL/sFiaIqcFGlarsm9ijeudo0pacDBAlun0hLE/+Qt5iS4AJoupesq
+LMOh3SGOo4KQhrcZx1ts0XiEuns2XbcWAQpBByu9MgEsmiB6yyw5J8Pg7ir1wFjg
+HnKG/BjQRzo12Xty8wbdq1YDgkWvlu5opTYI1ArM/kd6zPF30fsDRBsAEQEAAYh+
+BBgWCgAmFiEE99N4kCKKkHRA4f1IRrkijoFKKqwFAmLmhnoCGwwFCQPCZwAACgkQ
+RrkijoFKKqwxNAEAwcUbJlvS+tJsRgqdQqTVgVw9k+g+tOT5TYjQnDPnDgoA/3Nj
+orUkhudDNGEW8odSz2C+mEHjy9HUJGLI5ul1ZqwCiH4EGBYKACYCGwwWIQT303iQ
+IoqQdEDh/UhGuSKOgUoqrAUCZqqeBQUJBaVLCAAKCRBGuSKOgUoqrMnbAP4oQbpa
+Uki4OAfaSbH36qYTIbe8k9w58+e4nsVBII94wQEA3nSPoMKWZTI1eiHR/xKc9uOI
+/Nk2tOHKpEjs9mOtywaIfgQYFgoAJgIbDBYhBPfTeJAiipB0QOH9SEa5Io6BSiqs
+BQJojqXOBQkJaoZUAAoJEEa5Io6BSiqsiXkBAJ0JTRmdQQpEK9KSh8V7FEkblIsm
+Ngko2cs+OhNSUgW9AQD0a7FHM3Dx32a7yD0zE3QwWi5VgeZZVIPyhItrOaANDbgz
+BGLmhsUWCSsGAQQB2kcPAQEHQFg/avgj0sZbxqL58tZEpcaieeL1OWOoVU3mZX/K
+7GU+iH4EGBYKACYWIQT303iQIoqQdEDh/UhGuSKOgUoqrAUCYuaGxQIbIAUJA8Jn
+AAAKCRBGuSKOgUoqrN5jAP96aO0MEPQSIKdLaa9+ilpPp+glJ9duIJ7zdR0U15tO
+NAEA0WqeRc8Jhv10UjIz/Q3UlcfvKPzVW6yVKo+Lg1FI2QSIfgQYFgoAJgIbIBYh
+BPfTeJAiipB0QOH9SEa5Io6BSiqsBQJmqp4GBQkFpUq9AAoJEEa5Io6BSiqsjF0B
+AJn0EBEJfszskYiZzMshFHW5k0QUF+Ak3JNh2UG+M6FJAQCQVY/lDkrvOytuFnKb
+kDrCaTrtLh/JAmBXpSERIejmD4h+BBgWCgAmAhsgFiEE99N4kCKKkHRA4f1IRrki
+joFKKqwFAmiOpc4FCQlqhgkACgkQRrkijoFKKqwSMAD/bbO/uwwdFEJVgcNRexZU
+6aoSxAGI1vjS92hSyfxZ9AABAK8KYO8sBGGCiVu+vWUpoUYmp3lfYTJHtf+36WMc
+D5MD
+=Gubf
 -----END PGP PUBLIC KEY BLOCK-----

misc/builder.nix

@@ -1,11 +0,0 @@
-{ ... }:
-
-{
-  nix.settings.trusted-users = [ "@nix-builder-users" ];
-  nix.daemonCPUSchedPolicy = "batch";
-
-  boot.binfmt.emulatedSystems = [
-    "aarch64-linux"
-    "armv7l-linux"
-  ];
-}

misc/metrics-exporters.nix

@@ -1,80 +0,0 @@
-{ config, pkgs, values, ... }:
-
-{
-  services.prometheus.exporters.node = {
-    enable = true;
-    port = 9100;
-    enabledCollectors = [ "systemd" ];
-  };
-
-  systemd.services.prometheus-node-exporter.serviceConfig = {
-    IPAddressDeny = "any";
-    IPAddressAllow = [
-      "127.0.0.1"
-      "::1"
-      values.hosts.ildkule.ipv4
-      values.hosts.ildkule.ipv6
-    ];
-  };
-
-
-  services.prometheus.exporters.systemd = {
-    enable = true;
-    port = 9101;
-    extraFlags = [
-      "--systemd.collector.enable-restart-count"
-      "--systemd.collector.enable-ip-accounting"
-    ];
-  };
-
-  systemd.services.prometheus-systemd-exporter.serviceConfig = {
-    IPAddressDeny = "any";
-    IPAddressAllow = [
-      "127.0.0.1"
-      "::1"
-      values.hosts.ildkule.ipv4
-      values.hosts.ildkule.ipv6
-    ];
-  };
-  
-
-  networking.firewall.allowedTCPPorts = [ 9100 9101 ];
-
-  services.promtail = {
-    enable = true;
-    configuration = {
-      server = {
-        http_listen_port = 28183;
-        grpc_listen_port = 0;
-      };
-      clients = [
-        {
-          url = "http://ildkule.pvv.ntnu.no:3100/loki/api/v1/push";
-        }
-      ];
-      scrape_configs = [
-        {
-          job_name = "systemd-journal";
-          journal = {
-            max_age = "12h";
-            labels = {
-              job = "systemd-journal";
-              host = config.networking.hostName;
-            };
-          };
-          relabel_configs = [
-            {
-              source_labels = [ "__journal__systemd_unit" ];
-              target_label = "unit";
-            }
-            {
-              source_labels = [ "__journal_priority_keyword" ];
-              target_label = "level";
-            }
-          ];
-        }
-      ];
-    };
-  };
-
-}

misc/rust-motd.nix

@@ -1,86 +0,0 @@
-{ pkgs, lib, config, ... }:
-{
-  environment = {
-    systemPackages = with pkgs; [
-      rust-motd
-      toilet
-    ];
-
-    loginShellInit = let
-      motd = "${pkgs.rust-motd}/bin/rust-motd /etc/${config.environment.etc.rustMotdConfig.target}";
-    in ''
-      # Assure stdout is a terminal, so headless programs won't be broken
-      if [ "x''${SSH_TTY}" != "x" ]; then
-        ${motd}
-      fi
-    '';
-
-    etc.rustMotdConfig = {
-      target = "rust-motd-config.toml";
-      source = let
-
-        cfg = {
-          global = {
-            progress_full_character = "=";
-            progress_empty_character = "=";
-            progress_prefix = "[";
-            progress_suffix = "]";
-            time_format = "%Y-%m-%d %H:%M:%S";
-          };
-
-          banner = {
-            color = "red";
-            command = "hostname | ${pkgs.toilet}/bin/toilet -f mono9";
-          };
-
-          service_status = {
-            Accounts = "accounts-daemon";
-            Cron = "cron";
-            Docker = "docker";
-            Matrix = "matrix-synapse";
-            sshd = "sshd";
-          };
-
-          uptime = {
-            prefix = "Uptime: ";
-          };
-
-          # Not relevant for server
-          # user_service_status = {
-          #   Gpg-agent = "gpg-agent";
-          # };
-
-          filesystems = let
-            inherit (lib.attrsets) attrNames listToAttrs nameValuePair;
-            inherit (lib.lists) imap1;
-            inherit (config) fileSystems;
-
-            imap1Attrs' = f: set:
-              listToAttrs (imap1 (i: attr: f i attr set.${attr}) (attrNames set));
-
-            getName = i: v: if (v.label != null) then v.label else "<? ${toString i}>";
-          in
-            imap1Attrs' (i: n: v: nameValuePair (getName i v) n) fileSystems;
-
-          memory = {
-            swap_pos = "beside"; # or "below" or "none"
-          };
-
-          last_login = let
-            inherit (lib.lists) imap1;
-            inherit (lib.attrsets) filterAttrs nameValuePair attrValues listToAttrs;
-            inherit (config.users) users;
-
-            normalUsers = filterAttrs (n: v: v.isNormalUser || n == "root") users;
-            userNPVs = imap1 (index: user: nameValuePair user.name index) (attrValues normalUsers);
-          in listToAttrs userNPVs;
-
-          last_run = {};
-        };
-
-        toml = pkgs.formats.toml {};
-
-      in toml.generate "rust-motd.toml" cfg;
-    };
-  };
-}

modules/bluemap.nix

@@ -25,7 +25,7 @@ let
     "core.conf" = coreConfig;
     "webapp.conf" = webappConfig;
     "webserver.conf" = webserverConfig;
-    "packs" = cfg.resourcepacks;
+    "packs" = cfg.packs;
   };
 
   renderConfigFolder = name: value: pkgs.linkFarm "bluemap-${name}-config" {
@@ -36,7 +36,7 @@ let
     "core.conf" = coreConfig;
     "webapp.conf" = format.generate "webapp.conf" (cfg.webappSettings // { "update-settings-file" = false; });
     "webserver.conf" = webserverConfig;
-    "packs" = value.resourcepacks;
+    "packs" = value.packs;
   };
 
   inherit (lib) mkOption;
@@ -110,7 +110,7 @@ in {
           metrics = lib.mkEnableOption "Sending usage metrics containing the version of bluemap in use";
         };
       };
-      description = "Settings for the core.conf file, [see upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/BlueMapCommon/src/main/resources/de/bluecolored/bluemap/config/core.conf).";
+      description = "Settings for the core.conf file, [see upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/common/src/main/resources/de/bluecolored/bluemap/config/core.conf).";
     };
 
     webappSettings = mkOption {
@@ -127,7 +127,7 @@ in {
           webroot = config.services.bluemap.webRoot;
         }
       '';
-      description = "Settings for the webapp.conf file, see [upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/BlueMapCommon/src/main/resources/de/bluecolored/bluemap/config/webapp.conf).";
+      description = "Settings for the webapp.conf file, see [upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/common/src/main/resources/de/bluecolored/bluemap/config/webapp.conf).";
     };
 
     webserverSettings = mkOption {
@@ -147,18 +147,18 @@ in {
       default = { };
       description = ''
         Settings for the webserver.conf file, usually not required.
-        [See upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/BlueMapCommon/src/main/resources/de/bluecolored/bluemap/config/webserver.conf).
+        [See upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/common/src/main/resources/de/bluecolored/bluemap/config/webserver.conf).
       '';
     };
 
     maps = mkOption {
-      type = lib.types.attrsOf (lib.types.submodule {
+      type = lib.types.attrsOf (lib.types.submodule ({ name, ... }: {
         options = {
-          resourcepacks = mkOption {
+          packs = mkOption {
             type = lib.types.path;
-            default = cfg.resourcepacks;
-            defaultText = lib.literalExpression "config.services.bluemap.resourcepacks";
-            description = "A set of resourcepacks/mods/bluemap-addons to extract models from loaded in alphabetical order";
+            default = cfg.packs;
+            defaultText = lib.literalExpression "config.services.bluemap.packs";
+            description = "A set of resourcepacks, datapacks, and mods to extract resources from, loaded in alphabetical order.";
           };
           settings = mkOption {
             type = (lib.types.submodule {
@@ -168,43 +168,74 @@ in {
                   type = lib.types.path;
                   description = "Path to world folder containing the dimension to render";
                 };
+                name = mkOption {
+                  type = lib.types.str;
+                  description = "The display name of this map (how this map will be named on the webapp)";
+                  default = name;
+                  defaultText = lib.literalExpression "<name>";
+                };
+                render-mask = mkOption {
+                  type = with lib.types; listOf (attrsOf format.type);
+                  description = "Limits for the map render";
+                  default = [ ];
+                  example = [
+                    {
+                      min-x = -4000;
+                      max-x = 4000;
+                      min-z = -4000;
+                      max-z = 4000;
+                      min-y = 50;
+                      max-y = 100;
+                    }
+                    {
+                      subtract = true;
+                      min-y = 90;
+                      max-y = 127;
+                    }
+                  ];
+                };
               };
             });
             description = ''
               Settings for files in `maps/`.
               See the default for an example with good options for the different world types.
-              For valid values [consult upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/BlueMapCommon/src/main/resources/de/bluecolored/bluemap/config/maps/map.conf).
+              For valid values [consult upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/blob/master/common/src/main/resources/de/bluecolored/bluemap/config/maps/map.conf).
             '';
           };
         };
-      });
+      }));
       default = {
         "overworld".settings = {
-          world = "${cfg.defaultWorld}";
+          world = cfg.defaultWorld;
+          dimension = "minecraft:overworld";
+          name = "Overworld";
           ambient-light = 0.1;
           cave-detection-ocean-floor = -5;
         };
 
         "nether".settings = {
-          world = "${cfg.defaultWorld}/DIM-1";
+          world = cfg.defaultWorld;
+          dimension = "minecraft:the_nether";
+          name = "Nether";
           sorting = 100;
           sky-color = "#290000";
           void-color = "#150000";
+          sky-light = 1;
           ambient-light = 0.6;
-          world-sky-light = 0;
           remove-caves-below-y = -10000;
           cave-detection-ocean-floor = -5;
           cave-detection-uses-block-light = true;
-          max-y = 90;
         };
 
         "end".settings = {
-          world = "${cfg.defaultWorld}/DIM1";
+          world = cfg.defaultWorld;
+          dimension = "minecraft:the_end";
+          name = "The End";
           sorting = 200;
           sky-color = "#080010";
           void-color = "#080010";
+          sky-light = 1;
           ambient-light = 0.6;
-          world-sky-light = 0;
           remove-caves-below-y = -10000;
           cave-detection-ocean-floor = -5;
         };
@@ -212,31 +243,36 @@ in {
       defaultText = lib.literalExpression ''
         {
           "overworld".settings = {
-            world = "''${cfg.defaultWorld}";
+            world = cfg.defaultWorld;
+            name = "Overworld";
+            dimension = "minecraft:overworld";
             ambient-light = 0.1;
             cave-detection-ocean-floor = -5;
           };
 
           "nether".settings = {
-            world = "''${cfg.defaultWorld}/DIM-1";
+            world = cfg.defaultWorld;
+            dimension = "minecraft:the_nether";
+            name = "Nether";
             sorting = 100;
             sky-color = "#290000";
             void-color = "#150000";
+            sky-light = 1;
             ambient-light = 0.6;
-            world-sky-light = 0;
             remove-caves-below-y = -10000;
             cave-detection-ocean-floor = -5;
             cave-detection-uses-block-light = true;
-            max-y = 90;
           };
 
           "end".settings = {
-            world = "''${cfg.defaultWorld}/DIM1";
+            world = cfg.defaultWorld;
+            name = "The End";
+            dimension = "minecraft:the_end";
             sorting = 200;
             sky-color = "#080010";
             void-color = "#080010";
+            sky-light = 1;
             ambient-light = 0.6;
-            world-sky-light = 0;
             remove-caves-below-y = -10000;
             cave-detection-ocean-floor = -5;
           };
@@ -264,7 +300,7 @@ in {
       description = ''
         Where the rendered map will be stored.
         Unless you are doing something advanced you should probably leave this alone and configure webRoot instead.
-        [See upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/tree/master/BlueMapCommon/src/main/resources/de/bluecolored/bluemap/config/storages)
+        [See upstream docs](https://github.com/BlueMap-Minecraft/BlueMap/tree/master/common/src/main/resources/de/bluecolored/bluemap/config/storages)
       '';
       default = {
         "file" = {
@@ -280,12 +316,12 @@ in {
       '';
     };
 
-    resourcepacks = mkOption {
+    packs = mkOption {
       type = lib.types.path;
-      default = pkgs.linkFarm "resourcepacks" { };
+      default = pkgs.linkFarm "packs" { };
       description = ''
-        A set of resourcepacks/mods to extract models from loaded in alphabetical order.
-        Can be overriden on a per-map basis with `services.bluemap.maps.<name>.resourcepacks`.
+        A set of resourcepacks, datapacks, and mods to extract resources from, loaded in alphabetical order.
+        Can be overriden on a per-map basis with `services.bluemap.maps.<name>.packs`.
       '';
     };
   };
@@ -306,21 +342,23 @@ in {
     systemd.services."render-bluemap-maps" = lib.mkIf cfg.enableRender {
       serviceConfig = {
         Type = "oneshot";
+        CPUSchedulingPolicy = "batch";
         Group = "nginx";
         UMask = "026";
+        ExecStart = [
+          # If web folder doesnt exist generate it
+          ''|test -f "${cfg.webRoot}" || ${lib.getExe cfg.package} -c ${webappConfigFolder} -gs''
+        ]
+        ++
+          # Render each minecraft map
+          lib.attrsets.mapAttrsToList
+            (name: value: "${lib.getExe cfg.package} -c ${renderConfigFolder name value} -r")
+            cfg.maps
+        ++ [
+          # Generate updated webapp
+          "${lib.getExe cfg.package} -c ${webappConfigFolder} -gs"
+        ];
       };
-      script = ''
-        # If web folder doesnt exist generate it
-        test -f "${cfg.webRoot}" || ${lib.getExe cfg.package} -c ${webappConfigFolder} -gs
-
-        # Render each minecraft map
-        ${lib.strings.concatStringsSep "\n" (lib.attrsets.mapAttrsToList
-          (name: value: "${lib.getExe cfg.package} -c ${renderConfigFolder name value} -r")
-          cfg.maps)}
-
-        # Generate updated webapp
-        ${lib.getExe cfg.package} -c ${webappConfigFolder} -gs
-      '';
     };
 
     systemd.timers."render-bluemap-maps" = lib.mkIf cfg.enableRender {

modules/gickup/default.nix

@@ -0,0 +1,310 @@
+{ config, pkgs, lib, utils, ... }:
+let
+  cfg = config.services.gickup;
+  format = pkgs.formats.yaml { };
+in
+{
+  imports = [
+    ./set-description.nix
+    ./hardlink-files.nix
+    ./import-from-toml.nix
+    ./update-linktree.nix
+  ];
+
+  options.services.gickup = {
+    enable = lib.mkEnableOption "gickup, a git repository mirroring service";
+
+    package = lib.mkPackageOption pkgs "gickup" { };
+    gitPackage = lib.mkPackageOption pkgs "git" { };
+    gitLfsPackage = lib.mkPackageOption pkgs "git-lfs" { };
+
+    dataDir = lib.mkOption {
+      type = lib.types.path;
+      description = "The directory to mirror repositories to.";
+      default = "/var/lib/gickup";
+      example = "/data/gickup";
+    };
+
+    destinationSettings = lib.mkOption {
+      description = ''
+        Settings for destination local, see gickup configuration file
+
+        Note that `path` will be set automatically to `/var/lib/gickup`
+      '';
+      type = lib.types.submodule {
+        freeformType = format.type;
+      };
+      default = { };
+      example = {
+        structured = true;
+        zip = false;
+        keep = 10;
+        bare = true;
+        lfs = true;
+      };
+    };
+
+    instances = lib.mkOption {
+      type = lib.types.attrsOf (lib.types.submodule (submoduleInputs@{ name, ... }: let
+        submoduleName = name;
+
+        nameParts = rec {
+          repoType = builtins.head (lib.splitString ":" submoduleName);
+
+          owner = if repoType == "any"
+                  then null
+                  else lib.pipe submoduleName [
+                    (lib.removePrefix "${repoType}:")
+                    (lib.splitString "/")
+                    builtins.head
+                  ];
+
+          repo = if repoType == "any"
+                 then null
+                 else lib.pipe submoduleName [
+                    (lib.removePrefix "${repoType}:")
+                    (lib.splitString "/")
+                    lib.last
+                  ];
+
+          slug = if repoType == "any"
+                 then lib.toLower (builtins.replaceStrings [ ":" "/" ] [ "-" "-" ] submoduleName)
+                 else "${lib.toLower repoType}-${lib.toLower owner}-${lib.toLower repo}";
+        };
+      in {
+        options = {
+          interval = lib.mkOption {
+            type = lib.types.str;
+            default = "daily";
+            example = "weekly";
+            description = ''
+              Specification (in the format described by {manpage}`systemd.time(7)`) of the time
+              interval at which to run the service.
+            '';
+          };
+
+          type = lib.mkOption {
+            type = lib.types.enum [
+              "github"
+              "gitlab"
+              "gitea"
+              "gogs"
+              "bitbucket"
+              "onedev"
+              "sourcehut"
+              "any"
+            ];
+            example = "github";
+            default = nameParts.repoType;
+            description = ''
+              The type of the repository to mirror.
+            '';
+          };
+
+          owner = lib.mkOption {
+            type = with lib.types; nullOr str;
+            example = "go-gitea";
+            default = nameParts.owner;
+            description = ''
+              The owner of the repository to mirror (if applicable)
+            '';
+          };
+
+          repo = lib.mkOption {
+            type = with lib.types; nullOr str;
+            example = "gitea";
+            default = nameParts.repo;
+            description = ''
+              The name of the repository to mirror (if applicable)
+            '';
+          };
+
+          slug = lib.mkOption {
+            type = lib.types.str;
+            default = nameParts.slug;
+            example = "github-go-gitea-gitea";
+            description = ''
+              The slug of the repository to mirror.
+            '';
+          };
+
+          description = lib.mkOption {
+            type = with lib.types; nullOr str;
+            example = "A project which does this and that";
+            description = ''
+              A description of the project. This isn't used directly by gickup for anything,
+              but can be useful if gickup is used together with cgit or similar.
+            '';
+          };
+
+          settings = lib.mkOption {
+            description = "Instance specific settings, see gickup configuration file";
+            type = lib.types.submodule {
+              freeformType = format.type;
+            };
+            default = { };
+            example = {
+              username = "gickup";
+              password = "hunter2";
+              wiki = true;
+              issues = true;
+            };
+          };
+        };
+      }));
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    users.users.gickup = {
+      isSystemUser = true;
+      group = "gickup";
+      home = "/var/lib/gickup";
+    };
+
+    users.groups.gickup = { };
+
+    services.gickup.destinationSettings.path = "/var/lib/gickup/raw";
+
+    systemd.tmpfiles.settings."10-gickup" = lib.mkIf (cfg.dataDir != "/var/lib/gickup") {
+      ${cfg.dataDir}.d = {
+        user = "gickup";
+        group = "gickup";
+        mode = "0755";
+      };
+    };
+
+    systemd.slices."system-gickup" = {
+      description = "Gickup git repository mirroring service";
+      after = [ "network.target" ];
+    };
+
+    systemd.targets.gickup = {
+      description = "Gickup git repository mirroring service";
+      wants = map ({ slug, ... }: "gickup@${slug}.service") (lib.attrValues cfg.instances);
+    };
+
+    systemd.timers = {
+      "gickup@" = {
+        description = "Gickup git repository mirroring service for %i";
+
+        timerConfig = {
+          OnCalendar = "daily";
+          RandomizedDelaySec = "1h";
+          Persistent = true;
+          AccuracySec = "1s";
+        };
+      };
+    }
+    //
+    # Overrides for mirrors which are not "daily"
+    (lib.pipe cfg.instances [
+      builtins.attrValues
+      (builtins.filter (instance: instance.interval != "daily"))
+      (map ({ slug, interval, ... }: {
+        name = "gickup@${slug}";
+        value = {
+          overrideStrategy = "asDropin";
+          timerConfig.OnCalendar = interval;
+        };
+      }))
+      builtins.listToAttrs
+    ]);
+
+    systemd.targets.timers.wants = map ({ slug, ... }: "gickup@${slug}.timer") (lib.attrValues cfg.instances);
+
+    systemd.services = {
+      "gickup@" = let
+        configDir = lib.pipe cfg.instances [
+          (lib.mapAttrsToList (name: instance: {
+            name = "${instance.slug}.yml";
+            path = format.generate "gickup-configuration-${name}.yml" {
+              destination.local = [ cfg.destinationSettings ];
+              source.${instance.type} = [
+                (
+                  (lib.optionalAttrs (instance.type != "any") {
+                    user = instance.owner;
+                    includeorgs = [ instance.owner ];
+                    include = [ instance.repo ];
+                  })
+                  //
+                  instance.settings
+                )
+              ];
+            };
+          }))
+          (pkgs.linkFarm "gickup-configuration-files")
+        ];
+      in {
+        description = "Gickup git repository mirroring service for %i";
+        after = [ "network.target" ];
+
+        path = [
+          cfg.gitPackage
+          cfg.gitLfsPackage
+        ];
+
+        restartIfChanged = false;
+
+        serviceConfig = {
+          Type = "oneshot";
+          ExecStart = "'${pkgs.gickup}/bin/gickup' '${configDir}/%i.yml'";
+          ExecStartPost = "";
+
+          User = "gickup";
+          Group = "gickup";
+
+          BindPaths = lib.optionals (cfg.dataDir != "/var/lib/gickup") [
+            "${cfg.dataDir}:/var/lib/gickup"
+          ];
+
+          Slice = "system-gickup.slice";
+
+          SyslogIdentifier = "gickup-%i";
+          StateDirectory = "gickup";
+          # WorkingDirectory = "gickup";
+          # RuntimeDirectory = "gickup";
+          # RuntimeDirectoryMode = "0700";
+
+          # https://discourse.nixos.org/t/how-to-prevent-custom-systemd-service-from-restarting-on-nixos-rebuild-switch/43431
+          RemainAfterExit = true;
+
+          # Hardening options
+          AmbientCapabilities = [];
+          LockPersonality = true;
+          NoNewPrivileges = true;
+          PrivateDevices = true;
+          PrivateMounts = true;
+          PrivateTmp = true;
+          PrivateUsers = true;
+          ProcSubset = "pid";
+          ProtectClock = true;
+          ProtectControlGroups = true;
+          ProtectHome = true;
+          ProtectHostname = true;
+          ProtectKernelLogs = true;
+          ProtectKernelModules = true;
+          ProtectKernelTunables = true;
+          # ProtectProc = "invisible";
+          # ProtectSystem = "strict";
+          RemoveIPC = true;
+          RestrictAddressFamilies = [
+            "AF_INET"
+            "AF_INET6"
+          ];
+          RestrictNamespaces = true;
+          RestrictRealtime = true;
+          RestrictSUIDSGID = true;
+          SystemCallArchitectures = "native";
+          # SystemCallFilter = [
+          #   "@system-service"
+          #   "~@resources"
+          #   "~@privileged"
+          # ];
+          UMask = "0002";
+          CapabilityBoundingSet = [];
+        };
+      };
+    };
+  };
+}

modules/gickup/hardlink-files.nix

@@ -0,0 +1,42 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.gickup;
+in
+{
+  config = lib.mkIf cfg.enable {
+    # TODO: add a service that will look at the backed up files and hardlink
+    #       the ones that have a matching hash together to save space. This can
+    #       either run routinely (i.e. trigger by systemd-timer), or be activated
+    #       whenever a gickup@<slug>.service finishes. The latter is probably better.
+
+    # systemd.services."gickup-hardlink" = {
+    #   serviceConfig = {
+    #     Type = "oneshot";
+    #     ExecStart = let
+    #       script = pkgs.writeShellApplication {
+    #         name = "gickup-hardlink-files.sh";
+    #         runtimeInputs = [ pkgs.coreutils pkgs.jdupes ];
+    #         text = ''
+
+    #         '';
+    #       };
+    #     in lib.getExe script;
+
+    #     User = "gickup";
+    #     Group = "gickup";
+
+    #     BindPaths = lib.optionals (cfg.dataDir != "/var/lib/gickup") [
+    #       "${cfg.dataDir}:/var/lib/gickup"
+    #     ];
+
+    #     Slice = "system-gickup.slice";
+
+    #     StateDirectory = "gickup";
+
+    #     # Hardening options
+    #     # TODO:
+    #     PrivateNetwork = true;
+    #   };
+    # };
+  };
+}

modules/gickup/import-from-toml.nix

@@ -0,0 +1,11 @@
+{ config, lib, pkgs, ... }:
+
+let
+  cfg = config.services.gickup;
+in
+{
+  config = lib.mkIf cfg.enable {
+    # TODO: import cfg.instances from a toml file to make it easier for non-nix users
+    #       to add repositories to mirror
+  };
+}

modules/gickup/set-description.nix

@@ -0,0 +1,9 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.gickup;
+in
+{
+  config = lib.mkIf cfg.enable {
+    # TODO: create .git/description files for each repo where cfg.instances.<instance>.description is set
+  };
+}

modules/gickup/update-linktree.nix

@@ -0,0 +1,84 @@
+{ config, lib, pkgs, ... }:
+let
+  cfg = config.services.gickup;
+in
+{
+  config = lib.mkIf cfg.enable {
+    # TODO: run upon completion of cloning a repository
+    systemd.timers."gickup-linktree" = {
+      wantedBy = [ "timers.target" ];
+      timerConfig = {
+        OnCalendar = "daily";
+        Persistent = true;
+        Unit = "gickup-linktree.service";
+      };
+    };
+
+    # TODO: update symlink for one repo at a time (e.g. gickup-linktree@<instance>.service)
+    systemd.services."gickup-linktree" = {
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = let
+          script = pkgs.writeShellApplication {
+            name = "gickup-update-symlink-tree.sh";
+            runtimeInputs = [
+              pkgs.coreutils
+              pkgs.findutils
+            ];
+            text = ''
+              shopt -s nullglob
+
+              for repository in ./*/*/*; do
+                REPOSITORY_RELATIVE_DIRS=''${repository#"./"}
+
+                echo "Checking $REPOSITORY_RELATIVE_DIRS"
+
+                declare -a REVISIONS
+                readarray -t REVISIONS < <(find "$repository" -mindepth 1 -maxdepth 1 -printf "%f\n" | sort --numeric-sort --reverse)
+
+                if [[ "''${#REVISIONS[@]}" == 0 ]]; then
+                  echo "Found no revisions for $repository, continuing"
+                  continue
+                fi
+
+                LAST_REVISION="''${REVISIONS[0]}"
+                SYMLINK_PATH="../linktree/''${REPOSITORY_RELATIVE_DIRS}"
+
+                mkdir -p "$(dirname "$SYMLINK_PATH")"
+
+                EXPECTED_SYMLINK_TARGET=$(realpath "''${repository}/''${LAST_REVISION}")
+                EXISTING_SYMLINK_TARGET=$(realpath "$SYMLINK_PATH" || echo "<none>")
+
+                if [[ "$EXISTING_SYMLINK_TARGET" != "$EXPECTED_SYMLINK_TARGET" ]]; then
+                  echo "Updating symlink for $REPOSITORY_RELATIVE_DIRS"
+                  rm "$SYMLINK_PATH" ||:
+                  ln -rs "$EXPECTED_SYMLINK_TARGET" "$SYMLINK_PATH"
+                else
+                  echo "Symlink already up to date, continuing..."
+                fi
+
+                echo "---"
+              done
+            '';
+          };
+        in lib.getExe script;
+
+        User = "gickup";
+        Group = "gickup";
+
+        BindPaths = lib.optionals (cfg.dataDir != "/var/lib/gickup") [
+          "${cfg.dataDir}:/var/lib/gickup"
+        ];
+
+        Slice = "system-gickup.slice";
+
+        StateDirectory = "gickup";
+        WorkingDirectory = "/var/lib/gickup/raw";
+
+        # Hardening options
+        # TODO:
+        PrivateNetwork = true;
+      };
+    };
+  };
+}

modules/grzegorz.nix

@@ -1,4 +1,4 @@
-{config, lib, pkgs, ...}:
+{config, lib, pkgs, unstablePkgs, values, ...}:
 let
   grg = config.services.greg-ng;
   grgw = config.services.grzegorz-webui;
@@ -11,6 +11,13 @@ in {
     settings.port = 31337;
     enableSway = true;
     enablePipewire = true;
+
+    mpvPackage = unstablePkgs.mpv;
+  };
+
+  systemd.user.services.restart-greg-ng = {
+    script = "systemctl --user restart greg-ng.service";
+    startAt = "*-*-* 06:30:00";
   };
 
   services.grzegorz-webui = {
@@ -37,10 +44,23 @@ in {
         "${machine}.pvv.org"
       ];
       extraConfig = ''
-        allow 129.241.210.128/25;
-        allow 2001:700:300:1900::/64;
+        # pvv
+        allow ${values.ipv4-space}
+        allow ${values.ipv6-space}
+        # ntnu
+        allow ${values.ntnu.ipv4-space}
+        allow ${values.ntnu.ipv6-space}
         deny all;
       '';
+
+      locations."/docs" = {
+        proxyPass = "http://${grg.settings.host}:${toString grg.settings.port}";
+      };
+
+      locations."/api" = {
+        proxyPass = "http://${grg.settings.host}:${toString grg.settings.port}";
+        proxyWebsockets = true;
+      };
     };
 
     "${machine}-backend.pvv.ntnu.no" = {
@@ -51,8 +71,12 @@ in {
         "${machine}-backend.pvv.org"
       ];
       extraConfig = ''
-        allow 129.241.210.128/25;
-        allow 2001:700:300:1900::/64;
+        # pvv
+        allow ${values.ipv4-space}
+        allow ${values.ipv6-space}
+        # ntnu
+        allow ${values.ntnu.ipv4-space}
+        allow ${values.ntnu.ipv6-space}
         deny all;
       '';
 
@@ -70,8 +94,12 @@ in {
         "${machine}-old.pvv.org"
       ];
       extraConfig = ''
-        allow 129.241.210.128/25;
-        allow 2001:700:300:1900::/64;
+        # pvv
+        allow ${values.ipv4-space}
+        allow ${values.ipv6-space}
+        # ntnu
+        allow ${values.ntnu.ipv4-space}
+        allow ${values.ntnu.ipv6-space}
         deny all;
       '';
 

modules/matrix-ooye.nix

@@ -0,0 +1,211 @@
+# Original from: https://cgit.rory.gay/nix/OOYE-module.git/
+
+{
+  config,
+  lib,
+  pkgs,
+  ...
+}:
+let
+  cfg = config.services.matrix-ooye;
+  mkStringOption =
+    name: default:
+    lib.mkOption {
+      type = lib.types.str;
+      default = default;
+    };
+in
+{
+  options = {
+    services.matrix-ooye = {
+      enable = lib.mkEnableOption "Enable OOYE service";
+      package = lib.mkOption {
+        type = lib.types.package;
+        default = pkgs.out-of-your-element;
+      };
+      appserviceId = mkStringOption "The ID of the appservice." "ooye";
+      homeserver = mkStringOption "The homeserver to connect to." "http://localhost:8006";
+      homeserverName = mkStringOption "The name of the homeserver to connect to." "localhost";
+      namespace = mkStringOption "The prefix to use for the MXIDs/aliases of bridged users/rooms. Should end with a _!" "_ooye_";
+      discordTokenPath = mkStringOption "The path to the discord token file." "/etc/ooye-discord-token";
+      discordClientSecretPath = mkStringOption "The path to the discord token file." "/etc/ooye-discord-client-secret";
+      socket = mkStringOption "The socket to listen on, can either be a port number or a unix socket path." "6693";
+      bridgeOrigin = mkStringOption "The web frontend URL for the bridge, defaults to http://localhost:{socket}" "";
+
+      enableSynapseIntegration = lib.mkEnableOption "Enable Synapse integration";
+    };
+  };
+  config = lib.mkIf cfg.enable (
+    let
+      baseConfig = pkgs.writeText "matrix-ooye-config.json" (
+        builtins.toJSON {
+          id = cfg.appserviceId;
+          namespaces = {
+            users = [
+              {
+                exclusive = true;
+                regex = "@${cfg.namespace}.*:${cfg.homeserverName}";
+              }
+            ];
+            aliases = [
+              {
+                exclusive = true;
+                regex = "#${cfg.namespace}.*:${cfg.homeserverName}";
+              }
+            ];
+          };
+          protocols = [ "discord" ];
+          sender_localpart = "${cfg.namespace}bot";
+          rate_limited = false;
+          socket = cfg.socket; # Can either be a TCP port or a unix socket path
+          url = if (lib.hasPrefix "/" cfg.socket) then "unix:${cfg.socket}" else "http://localhost:${cfg.socket}";
+          ooye = {
+            server_name = cfg.homeserverName;
+            namespace_prefix = cfg.namespace;
+            max_file_size = 5000000;
+            content_length_workaround = false;
+            include_user_id_in_mxid = true;
+            server_origin = cfg.homeserver;
+            bridge_origin = if (cfg.bridgeOrigin == "") then "http://localhost:${cfg.socket}" else cfg.bridgeOrigin;
+          };
+        }
+      );
+
+      script = pkgs.writeScript "matrix-ooye-pre-start.sh" ''
+        #!${lib.getExe pkgs.bash}
+        REGISTRATION_FILE=registration.yaml
+
+        id
+        echo "Before if statement"
+        stat ''${REGISTRATION_FILE}
+
+        if [[ ! -f ''${REGISTRATION_FILE} ]]; then
+          echo "No registration file found at '$REGISTRATION_FILE'"
+          cp --no-preserve=mode,ownership ${baseConfig} ''${REGISTRATION_FILE}
+        fi
+
+        echo "After if statement"
+        stat ''${REGISTRATION_FILE}
+
+        AS_TOKEN=$(${lib.getExe pkgs.jq} -r .as_token ''${REGISTRATION_FILE})
+        HS_TOKEN=$(${lib.getExe pkgs.jq} -r .hs_token ''${REGISTRATION_FILE})
+        DISCORD_TOKEN=$(cat /run/credentials/matrix-ooye-pre-start.service/discord_token)
+        DISCORD_CLIENT_SECRET=$(cat /run/credentials/matrix-ooye-pre-start.service/discord_client_secret)
+
+        # Check if we have all required tokens
+        if [[ -z "$AS_TOKEN" || "$AS_TOKEN" == "null" ]]; then
+          AS_TOKEN=$(${lib.getExe pkgs.openssl} rand -hex 64)
+          echo "Generated new AS token: ''${AS_TOKEN}"
+        fi
+
+        if [[ -z "$HS_TOKEN" || "$HS_TOKEN" == "null" ]]; then
+          HS_TOKEN=$(${lib.getExe pkgs.openssl} rand -hex 64)
+          echo "Generated new HS token: ''${HS_TOKEN}"
+        fi
+
+        if [[ -z "$DISCORD_TOKEN" ]]; then
+          echo "No Discord token found at '${cfg.discordTokenPath}'"
+          echo "You can find this on the 'Bot' tab of your Discord application."
+          exit 1
+        fi
+
+        if [[ -z "$DISCORD_CLIENT_SECRET" ]]; then
+          echo "No Discord client secret found at '${cfg.discordTokenPath}'"
+          echo "You can find this on the 'OAuth2' tab of your Discord application."
+          exit 1
+        fi
+
+        shred -u ''${REGISTRATION_FILE}
+        cp --no-preserve=mode,ownership ${baseConfig} ''${REGISTRATION_FILE}
+
+        ${lib.getExe pkgs.jq} '.as_token = "'$AS_TOKEN'" | .hs_token = "'$HS_TOKEN'" | .ooye.discord_token = "'$DISCORD_TOKEN'" | .ooye.discord_client_secret = "'$DISCORD_CLIENT_SECRET'"' ''${REGISTRATION_FILE} > ''${REGISTRATION_FILE}.tmp
+
+        shred -u ''${REGISTRATION_FILE}
+        mv ''${REGISTRATION_FILE}.tmp ''${REGISTRATION_FILE}
+      '';
+
+    in
+    {
+      warnings =
+        lib.optionals ((builtins.substring (lib.stringLength cfg.namespace - 1) 1 cfg.namespace) != "_") [
+          "OOYE namespace does not end with an underscore! This is recommended to have better ID formatting. Provided: '${cfg.namespace}'"
+        ]
+        ++ lib.optionals ((builtins.substring 0 1 cfg.namespace) != "_") [
+          "OOYE namespace does not start with an underscore! This is recommended to avoid conflicts with registered users. Provided: '${cfg.namespace}'"
+        ];
+
+      environment.systemPackages = [ cfg.package ];
+
+      systemd.services."matrix-ooye-pre-start" = {
+        enable = true;
+        wantedBy = [ "multi-user.target" ];
+        serviceConfig = {
+          ExecStart = script;
+          WorkingDirectory = "/var/lib/matrix-ooye";
+          StateDirectory = "matrix-ooye";
+          DynamicUser = true;
+          RemainAfterExit = true;
+          Type = "oneshot";
+
+          LoadCredential = [
+            "discord_token:${cfg.discordTokenPath}"
+            "discord_client_secret:${cfg.discordClientSecretPath}"
+          ];
+        };
+      };
+
+      systemd.services."matrix-ooye" = {
+        enable = true;
+        description = "Out of Your Element - a Discord bridge for Matrix.";
+
+        wants = [
+          "network-online.target"
+          "matrix-synapse.service"
+          "conduit.service"
+          "dendrite.service"
+        ];
+        after = [
+          "matrix-ooye-pre-start.service"
+          "network-online.target"
+        ];
+        requires = [ "matrix-ooye-pre-start.service" ];
+        wantedBy = [ "multi-user.target" ];
+
+        serviceConfig = {
+          ExecStart = lib.getExe config.services.matrix-ooye.package;
+          WorkingDirectory = "/var/lib/matrix-ooye";
+          StateDirectory = "matrix-ooye";
+          #ProtectSystem = "strict";
+          #ProtectHome = true;
+          #PrivateTmp = true;
+          #NoNewPrivileges = true;
+          #PrivateDevices = true;
+          Restart = "on-failure";
+          DynamicUser = true;
+        };
+      };
+
+      systemd.services."matrix-synapse" = lib.mkIf cfg.enableSynapseIntegration {
+
+        after = [
+          "matrix-ooye-pre-start.service"
+          "network-online.target"
+        ];
+        requires = [ "matrix-ooye-pre-start.service" ];
+        serviceConfig = {
+          LoadCredential = [
+            "matrix-ooye-registration:/var/lib/matrix-ooye/registration.yaml"
+          ];
+          ExecStartPre = [
+            "+${pkgs.coreutils}/bin/cp /run/credentials/matrix-synapse.service/matrix-ooye-registration ${config.services.matrix-synapse.dataDir}/ooye-registration.yaml"
+            "+${pkgs.coreutils}/bin/chown matrix-synapse:matrix-synapse ${config.services.matrix-synapse.dataDir}/ooye-registration.yaml"
+          ];
+        };
+      };
+
+      services.matrix-synapse.settings.app_service_config_files = lib.mkIf cfg.enableSynapseIntegration [
+        "${config.services.matrix-synapse.dataDir}/ooye-registration.yaml"
+      ];
+    }
+  );
+}

packages/bluemap.nix

@@ -2,11 +2,11 @@
 
 stdenvNoCC.mkDerivation rec {
   pname = "bluemap";
-  version = "5.2";
+  version = "5.15";
 
   src = fetchurl {
     url = "https://github.com/BlueMap-Minecraft/BlueMap/releases/download/v${version}/BlueMap-${version}-cli.jar";
-    hash = "sha256-4vld+NBwzBxdwbMtsKuqvO6immkbh4HB//6wdjXaxoU=";
+    hash = "sha256-g50V/4LtHaHNRMTt+PK/ZTf4Tber2D6ZHJvuAXQLaFI=";
   };
 
   dontUnpack = true;

packages/cgit.nix

@@ -0,0 +1,21 @@
+{ cgit, fetchurl, ... }:
+let
+  pname = cgit.pname;
+  commit = "09d24d7cd0b7e85633f2f43808b12871bb209d69";
+in
+cgit.overrideAttrs (_: {
+  version = "1.2.3-unstable-2024.07.16";
+
+  src = fetchurl {
+    url = "https://git.zx2c4.com/cgit/snapshot/${pname}-${commit}.tar.xz";
+    hash = "sha256-gfgjAXnWRqVCP+4cmYOVdB/3OFOLJl2WBOc3bFVDsjw=";
+  };
+
+  # cgit is tightly coupled with git and needs a git source tree to build.
+  # IMPORTANT: Remember to check which git version cgit needs on every version
+  # bump (look for "GIT_VER" in the top-level Makefile).
+  gitSrc = fetchurl {
+    url = "mirror://kernel/software/scm/git/git-2.46.0.tar.xz";
+    hash = "sha256-fxI0YqKLfKPr4mB0hfcWhVTCsQ38FVx+xGMAZmrCf5U=";
+  };
+})

packages/mediawiki-extensions/default.nix

@@ -12,7 +12,7 @@ let
     name
   , commit
   , hash
-  , tracking-branch ? "REL1_42"
+  , tracking-branch ? "REL1_44"
   , kebab-name ? kebab-case-name name
   , fetchgit ? pkgs.fetchgit
   }:
@@ -33,63 +33,63 @@ in
 lib.mergeAttrsList [
   (mw-ext {
     name = "CodeEditor";
-    commit = "9f69f2cf7616342d236726608a702d651b611938";
-    hash = "sha256-sRaYj34+7aghJUw18RoowzEiMx0aOANU1a7YT8jivBw=";
+    commit = "6e5b06e8cf2d040c0abb53ac3735f9f3c96a7a4f";
+    hash = "sha256-Jee+Ws9REUohywhbuemixXKaTRc54+cIlyUNDCyYcEM=";
   })
   (mw-ext {
     name = "CodeMirror";
-    commit = "1a1048c770795789676adcf8a33c1b69f6f5d3ae";
-    hash = "sha256-Y5ePrtLNiko2uU/sesm8jdYmxZkYzQDHfkIG1Q0v47I=";
+    commit = "da9c5d4f03e6425f6f2cf68b75d21311e0f7e77e";
+    hash = "sha256-aL+v9xeqKHGmQVUWVczh54BkReu+fP49PT1NP7eTC6k=";
   })
   (mw-ext {
     name = "DeleteBatch";
-    commit = "b76bb482e026453079104d00f9675b4ab851947e";
-    hash = "sha256-GebF9B3RVwpPw8CYKDDT6zHv/MrrzV6h2TEIvNlRmcw=";
+    commit = "122072bbfb4eab96ed8c1451a3e74b5557054c58";
+    hash = "sha256-L6AXoyFJEZoAQpLO6knJvYtQ6JJPMtaa+WhpnwbJeNU=";
   })
   (mw-ext {
     name = "PluggableAuth";
-    commit = "1da98f447fd8321316d4286d8106953a6665f1cc";
-    hash = "sha256-DKDVcAfWL90FmZbSsdx1J5PkGu47EsDQmjlCpcgLCn4=";
+    commit = "5caf605b9dfdd482cb439d1ba2000cba37f8b018";
+    hash = "sha256-TYJqR9ZvaWJ7i1t0XfgUS05qqqCgxAH8tRTklz/Bmlg=";
   })
   (mw-ext {
     name = "Popups";
-    commit = "9b9e986316b9662b1b45ce307a58dd0320dd33cf";
-    hash = "sha256-rSOZHT3yFIxA3tPhIvztwMSmSef/XHKmNfQl1JtGrUA=";
+    commit = "7ed940a09f83f869cbc0bc20f3ca92f85b534951";
+    hash = "sha256-pcDPcu4kSvMHfSOuShrod694TKI9Oo3AEpMP9DXp9oY=";
   })
   (mw-ext {
     name = "Scribunto";
-    commit = "eb6a987e90db47b09b0454fd06cddb69fdde9c40";
-    hash = "sha256-Nr0ZLIrS5jnpiBgGnd90lzi6KshcsxeC+xGmNsB/g88=";
+    commit = "e755852a8e28a030a21ded2d5dd7270eb933b683";
+    hash = "sha256-zyI5nSE+KuodJOWyV0CQM7G0GfkKEgfoF/czi2/qk98=";
   })
   (mw-ext {
     name = "SimpleSAMLphp";
     kebab-name = "simple-saml-php";
-    commit = "fd4d49cf48d16efdb91ae8128cdd507efe84d311";
-    hash = "sha256-Qdtroew2j3AsZYlhAAUKQXXS2kUzUeQFnuR6ZHdFhAQ=";
+    commit = "d41b4efd3cc44ca3f9f12e35385fc64337873c2a";
+    hash = "sha256-wfzXtsEEEjQlW5QE4Rf8pasAW/KSJsLkrez13baxeqA=";
   })
   (mw-ext {
     name = "TemplateData";
-    commit = "836e3ca277301addd2578b2e746498ff6eb8e574";
-    hash = "sha256-UMcRLYxYn+AormwTYjKjjZZjA806goMY2TRQ4KoS5fY=";
+    commit = "fd7cf4d95a70ef564130266f2a6b18f33a2a2ff9";
+    hash = "sha256-5OhDPFhIi55Eh5+ovMP1QTjNBb9Sm/3vyArNCApAgSw=";
   })
   (mw-ext {
     name = "TemplateStyles";
-    commit = "06a2587689eba0a17945fd9bd4bb61674d3a7853";
-    hash = "sha256-C7j0jCkMeVZiLKpk+55X+lLnbG4aeH+hWIm3P5fF4fw=";
+    commit = "0f7b94a0b094edee1c2a9063a3c42a1bdc0282d9";
+    hash = "sha256-R406FgNcIip9St1hurtZoPPykRQXBrkJRKA9hapG81I=";
   })
   (mw-ext {
     name = "UserMerge";
-    commit = "41759d0c61377074d159f7d84130a095822bc7a3";
-    hash = "sha256-pGjA7r30StRw4ff0QzzZYUhgD3dC3ZuiidoSEz8kA8Q=";
+    commit = "d1917817dd287e7d883e879459d2d2d7bc6966f2";
+    hash = "sha256-la3/AQ38DMsrZ2f24T/z3yKzIrbyi3w6FIB5YfxGK9U=";
   })
   (mw-ext {
     name = "VisualEditor";
-    commit = "a128b11fe109aa882de5a40d2be0cdd0947ab11b";
-    hash = "sha256-bv1TkomouOxe+DKzthyLyppdEUFSXJ9uE0zsteVU+D4=";
+    commit = "032364cfdff33818e6ae0dfa251fe3973b0ae4f3";
+    hash = "sha256-AQDdq9r6rSo8h4u1ERonH14/1i1BgLGdzANEiQ065PU=";
   })
   (mw-ext {
     name = "WikiEditor";
-    commit = "21383e39a4c9169000acd03edfbbeec4451d7974";
-    hash = "sha256-aPVpE6e4qLLliN9U5TA36e8tFrIt7Fl8RT1cGPUWoNI=";
+    commit = "cb9f7e06a9c59b6d3b31c653e5886b7f53583d01";
+    hash = "sha256-UWi3Ac+LCOLliLkXnS8YL0rD/HguuPH5MseqOm0z7s4=";
   })
 ]

packages/out-of-your-element.nix

@@ -0,0 +1,56 @@
+{
+  lib,
+  fetchFromGitea,
+  makeWrapper,
+  nodejs,
+  buildNpmPackage,
+  fetchpatch,
+}:
+buildNpmPackage {
+  pname = "delete-your-element";
+  version = "3.3-unstable-2025-12-09";
+  src = fetchFromGitea {
+    domain = "git.pvv.ntnu.no";
+    owner = "Drift";
+    repo = "delete-your-element";
+    rev = "1c0c545a024ef7215a1a3483c10acce853f79765";
+    hash = "sha256-ow/PdlHfU7PCwsjJUEzoETzONs1KoKTRMRQ9ADN0tGk=";
+  };
+
+  patches = [
+    (fetchpatch {
+      name = "ooye-fix-package-lock-0001.patch";
+      url = "https://cgit.rory.gay/nix/OOYE-module.git/plain/pl.patch?h=ee126389d997ba14be3fe3ef360ba37b3617a9b2";
+      hash = "sha256-dP6WEHb0KksDraYML+jcR5DftH9BiXvwevUg38ALOrc=";
+    })
+  ];
+
+  npmDepsHash = "sha256-OXOyO6LxK/WYYVysSxkol0ilMUZB+osLYUE5DpJlbps=";
+  # npmDepsHash = "sha256-Y+vgp7+7pIDm64AYSs8ltoAiON0EPpJInbmgn3/LkVA=";
+  dontNpmBuild = true;
+  makeCacheWritable = true;
+
+  nativeBuildInputs = [ makeWrapper ];
+
+  installPhase = ''
+    runHook preInstall
+
+    mkdir -p $out/share
+    cp -a . $out/share/ooye
+    makeWrapper ${nodejs}/bin/node $out/bin/matrix-ooye --add-flags $out/share/ooye/start.js
+    makeWrapper ${nodejs}/bin/node $out/bin/matrix-ooye-addbot --add-flags $out/share/ooye/addbot.js
+
+    runHook postInstall
+  '';
+
+  meta = with lib; {
+    description = "Matrix-Discord bridge with modern features.";
+    homepage = "https://gitdab.com/cadence/out-of-your-element";
+    longDescription = ''
+      Modern Matrix-to-Discord appservice bridge, created by @cadence:cadence.moe.
+    '';
+    license = licenses.gpl3;
+    # maintainers = with maintainers; [ RorySys ];
+    mainProgram = "matrix-ooye";
+  };
+}

packages/simplesamlphp/default.nix

@@ -8,18 +8,18 @@
 
 php.buildComposerProject rec {
   pname = "simplesamlphp";
-  version = "2.2.1";
+  version = "2.4.3";
 
   src = fetchFromGitHub {
     owner = "simplesamlphp";
     repo = "simplesamlphp";
-    rev = "v${version}";
-    hash = "sha256-jo7xma60M4VZgeDgyFumvJp1Sm+RP4XaugDkttQVB+k=";
+    tag = "v${version}";
+    hash = "sha256-vv4gzcnPfMapd8gER2Vsng1SBloHKWrJJltnw2HUnX4=";
   };
 
   composerStrictValidation = false;
 
-  vendorHash = "sha256-n6lJ/Fb6xI124PkKJMbJBDiuISlukWQcHl043uHoBb4=";
+  vendorHash = "sha256-vu3Iz6fRk3Gnh9Psn46jgRYKkmqGte+5xHBRmvdgKG4=";
 
   # TODO: metadata could be fetched automagically with these:
   #   - https://simplesamlphp.org/docs/contrib_modules/metarefresh/simplesamlphp-automated_metadata.html

secrets/bakke/bakke.yaml

@@ -0,0 +1,90 @@
+hello: ENC[AES256_GCM,data:+GWORSIf9TxmJLw1ytZwPbve2yz5H9ewVE5sOpQzkrRpct6Wes+vTE19Ij8W1g==,iv:C/WhXNBBM/bidC9xynZzk34nYXF3mUjAd4nPXpUlYHs=,tag:OJXSwuI8aNDnHFFTkwyGBQ==,type:str]
+example_key: ENC[AES256_GCM,data:ojSsrFYo5YD0YtiqcA==,iv:nvNtG6c0OqnQovzWQLMjcn9vbQ4PPYSv2B43Y8z0h5s=,tag:+h7YUNRA2MTvwGJq1VZW8g==,type:str]
+#ENC[AES256_GCM,data:6EvhlBtrl5wqyf6UAGwY8Q==,iv:fzLUjBzyuT17FcP8jlmLrsKW46pu6/lAvAVLHBxje6k=,tag:n+qR1NUqa91uFRIpALKlmw==,type:comment]
+example_array:
+    - ENC[AES256_GCM,data:A38KXABxJzMoKitKpHo=,iv:OlRap3R//9tvKdPLz7uP+lvBa/fD0W8xFzdxIKKFi4E=,tag:QKizPN1fYOv5zZlMVgTIOQ==,type:str]
+    - ENC[AES256_GCM,data:8X2iVkHQtQMReopWdgM=,iv:2Wq3QOadwd3G3ROXNe7JQD4AL/5H/WV19TBEbxijG/8=,tag:tikKT9Wvzm4Vz5aoy6w9WQ==,type:str]
+example_number: ENC[AES256_GCM,data:0K05hiSPh2Ok1A==,iv:IVRo61xkKugv4OiPm0vt9ODm5DC1DzJFdlgQJb1TfTg=,tag:o3xXygVEUD4jaGSJr0Nxtw==,type:float]
+example_booleans:
+    - ENC[AES256_GCM,data:zoykmQ==,iv:1JGy1Cg5GdAiod9qPSzW+wsG6rUgUJyYMEE4k576Tlk=,tag:RUCbytPpo78bqlAVEUsbLg==,type:bool]
+sops:
+    age:
+        - recipient: age1syted6kt48sumjjucggh6r3uca4x2ppp4mfungf3lamkt2le05csc99633
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBOM0NNRFlYaDVtY2taK2xZ
+            R1pJKzhzOFJJbVI1ZEtQZTJJd1JiejdwaHpJCjlyZVZLZUpVeG1HNHo1UTlaa1gz
+            Q2JOTmpibndlcERXaWw3Ujd3OGo2aU0KLS0tIEhKcjFKYm82VFdHWTkvcFBDam5H
+            bzhGbFF6ZmRPTXpzMWgzWGJJbGlkUTAKtNREtgj4kXKDymmbBt2YVFUqrAaGY72z
+            8fUEIz/2/kPeb4QBpYt4HQabXDLCZXZ0Q5qhHRFOSER8o+TrkJDEow==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1ug30gg4y7ftuya0wdv7q0vh4egn00wlv2th7mt7cgc2ze46wmvyq9lq6ge
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBSbEJRNjVJSE5qSk1VcVR6
+            VTh6ZU93Q2dGclhZWXA4YTh5WXZ4MWFMRzNRCkJ6Z1F6a20za3ZxLzRsZGg2aHpn
+            Nll0NW9XRndIOFpzMVgwK3RxWm1BUkEKLS0tIGF0MUYwblY4a3haelJYRkNyd3lS
+            S0ZuSUVXWGVXbnJocm1LRjZRSGVrMFkKQcwZk7mlF96kPdvZyLNR2i5CnU/qR7/i
+            u897JxtxmXuuNDKPA80pFxfwkOwzcUVrYiwOlAbMENwJWH1SwFO3Cg==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1mrnldl334l2nszuta6ywvewng0fswv2dz9l5g4qcwe3nj4yxf92qjskdx6
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBWa2c5d0RvR21jQ21ZRVBL
+            dkR2RDhMMmJKTXk4UnFTbEZCbE5vV2cwRTNnCkFFT05kYUhXREtzSGkyY1VYQ2ZE
+            bU0xZnlUN0draW5DZXRqQlloVi9NaFkKLS0tIDdHb05weWlzcDN4bFdzYnpUVjVV
+            ZkVXK01odnZJeGhoaFFLbEVSMFJsMHcK/mgeA6aMlr7T35rHL3GriYHu2DQE45sI
+            8RdxdErESmpx0bneFbmsBgXOYu+iT64zatPEGVSu1taW/nMa8Ucpzw==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1hmpdk4h69wxpwqk9tkud39f66hprhehxtzhgw97r6dvr7v0mx5jscsuhkn
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBxbm4wL1pHeVVRYzJrb0RZ
+            VHA5ZGRTUHkxbk9qenpNRGE4bjQ0SzN6UVFvCkRHQ0VDaUhRRDI3Yy90UXZCdTlo
+            dnBHSmU5WlBlczlBbDBZRHFvLzFBWVkKLS0tIFVNVG5qRDZlcWZ4R00zc0N5bkli
+            d0Z4TEJzdEFuV3NnTndFZlpPMTNYSHMK1d1Use9/w4ClrCfShBymIxHZppCXmhmQ
+            vIW5vI4Ui0jSX9Rwhd17CLT66mQYBbaHTGB9fiGNQpFRc/ztaFbbnw==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1wrssr4z4g6vl3fd3qme5cewchmmhm0j2xe6wf2meu4r6ycn37anse98mfs
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBrNmF2ZTFreDdzdVZHRWt4
+            VW1TNXFWRW13T3VBN04wMi95VkRCeHJIalVNClRLZGFDY2ZIREkweXp5dU9yYVRD
+            T1N5QVh0eWczd3VIWEthbTZRVXM0L00KLS0tIFlWeDZmQzYrQXdoZ3dycS9udEFW
+            TGg0bGwxQjQ1UkR5OC9FajI1RHprUXMK8NRbkEjLEW6pANEkB0QyBcgMin/Aaf5A
+            dkFYo01G3XM7AmlnnM9UCc56Gc/ZfcsVaUhMAZoEvEvuU0++ufCIZg==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1zhxul786an743u0fascv4wtc5xduu7qfy803lfs539yzhgmlq5ds2lznt5
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBYNE04cmdoYnc4cGhmMmlW
+            aU1MNXpacVp2eGV1dU1GUUNyd3dFRDI0and3CllsSG9qR1IwaG1iU2FpWEduanhx
+            WVE2SWZBblp5RWd3Mi8rc2s3M2F6cXcKLS0tIFBnaCtIelBPdEtqRUIrTnY3VytC
+            K3dUNVgrYlVnRjRKVVRDQmxsUC9tOG8KFE/pU3tSnyohg58FTWWc2j1Yk0+QHRyH
+            VakZTPA8l2j7X01KOwEDaZBZrzFd8059GBUMRnylcVOCg5a5VjXpEg==
+            -----END AGE ENCRYPTED FILE-----
+    lastmodified: "2025-03-15T21:42:17Z"
+    mac: ENC[AES256_GCM,data:2gH/ZaxSA6ShRu53dxj7V3jk7FsVdYS+PSHQyFT8qMvKM1hsQ/nWrKt00PUl9I7Gb4uomP9Ga3SyphYOXRBzKoV+x52oEWOJE3Q4iPrwdCkyHlxEezhTd/ZRQVatG6dvHpLuDNS9Dyph4f7Mw5USI+m4WeVdgCvHTydw+4KIfP4=,iv:yimfq96WVsagvKr8HTg1RdZBSrVGcCWPvv8XOXkOfcg=,tag:zHzdrE0PX5+AeD2lpqeJVQ==,type:str]
+    pgp:
+        - created_at: "2025-12-22T06:10:02Z"
+          enc: |-
+            -----BEGIN PGP MESSAGE-----
+
+            hQIMA0av/duuklWYAQ/+Jcq2EiWutguXVgFJsG0eU9CmM/ZrSfN7Of6MeGh53vw5
+            F125rivlWf56nEjAnW0u0Ai1MRUUvL6cSqnIxH0y0NcgllkUVrMDJPtsp4/1pFG3
+            pMhQuaoun7mmHbMwFD/WIGk3NeQA2WRm8vCa2yHuOHKG5rISZDgY/5WdkLGK9Vll
+            A3eBaz2r+jQwZNHMTu9Sgmuya7EAGCb/7oSTyE+ZyG9zDwyvbKcuS+xMx/Sqx5a+
+            a1a38fJCdwTHNGR293kMhVK75z0aOvGp4t92bulAe0Tp0Efc43TNGYIGjOQT7r3J
+            k4YQ0OcR+fezp8GSLxoewWBpCMFaRliSnLh7XJwd2jTURbzlpQFFKNXW4pLxrAIr
+            ZJXZ6Hloz91MRoQ8HLCs7WqhLptXGnqXsJPCwdBJEeVzutyt3cZIzq11bNgf9sNv
+            Ydj86FmGTMFK5d9kNYAqxwnfcVIc3/AdbyKNoky1Muu0z5XvUdgUcYu5RK9yL3DA
+            dUJVI5uam+ONUatFeTbS2Vz7KEbwh1H3gfQUQTrE6FOSrh8bk0lp1aG1geL69ram
+            XXh/uHkvzTgbq+oiyiqbodurrEQHcdhrYJwvPELLQwtIq+0iVu7xNIFz+LNuAMqK
+            d1lualLK7xHNqCOhihY1nKR3PjDrE4tUKjtwu1lp2Ae+VEXg1FgrqdkquxlE+0XS
+            XgG0jfeGqwQKM1qGkaj9UX/xXe8Io5KhOAqRhnkauU9nZ4Uaj5X1rFpbLAOT2/FZ
+            rHjT46gUUh1hK2TEnL14yJ8ttIntlcXh6lJ6zbkIL7G+56GlqhPmr8M6N67VEq8=
+            =8M3y
+            -----END PGP MESSAGE-----
+          fp: F7D37890228A907440E1FD4846B9228E814A2AAC
+    unencrypted_suffix: _unencrypted
+    version: 3.8.1

secrets/bekkalokk/bekkalokk.yaml

@@ -35,86 +35,82 @@ bluemap:
     ssh-key: ENC[AES256_GCM,data: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,iv:WdJIHRzjlm8bEldolCx1Q7pZJvjxGkNZALSOy3IjizU=,tag:5ZAikiqttq/76+thG+4LMw==,type:str]
     ssh-known-hosts: ENC[AES256_GCM,data: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,iv:GI8w7h7xX8gMHuAoWUyrW+BQb85LNlASoYvGBPlCZaI=,tag:WnHNMevfFSMc0ikBZwWn/g==,type:str]
 sops:
-    kms: []
-    gcp_kms: []
-    azure_kv: []
-    hc_vault: []
     age:
         - recipient: age12nj59tguy9wg882updc2vjdusx5srnxmjyfaqve4zx6jnnsaw3qsyjq6zd
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBNbjFxWk5lY0kxaStxcnVh
-            SnlYamw5WXBRTkU0ZGFEWnZvME1nZk94TlIwCmlhVGFtckJpN1RZdXRBYkxDbnVS
-            UmZtWENzZWNYRmptY2kwem42ek1LbXcKLS0tIElsRXBmNHNmdjdqTmFLL2ltMnFC
-            VG11M3ZpeUJPUGlEQmExOEdSZFJERE0KSIo1pzx8AcoJWEzNzEDoV3eM7194IHxL
-            4pCSSztKDCF+XdJZLh5sgudaYLJGtX5n7q1hbuL0wOmotM9bN2YLog==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAvQjZvVEplU2pMQmgrQXE2
+            Qy9FY1NRZEhpSTVCdy9rVEFHekM4NHJEVlRvCkNnVUlCQzdGenlKOW56ZGY4bzJm
+            K1c1N25ZbDFNMDY0YzlGMTlMN2htSEEKLS0tIEYvWEVoMUVtVDRkeEt5eWFZckJs
+            aFRsYmhNMkQwdFlDa1ROWXdhWGFKUUEKqixofKZBMXpV8q801HtVoHzZWJhsifSB
+            DLPHbOAWpXjKygNJ1ogi66FWBFfRL0KGffQEuaIozTA1r1NafSCLKA==
             -----END AGE ENCRYPTED FILE-----
-        - recipient: age17tagmpwqjk3mdy45rfesrfey6h863x8wfq38wh33tkrlrywxducs0k6tpq
+        - recipient: age1ug30gg4y7ftuya0wdv7q0vh4egn00wlv2th7mt7cgc2ze46wmvyq9lq6ge
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBybXRjNEM3ZDYwa21LdWpE
-            dDg1MUxaeHlJSHRhWk40TndYbHZLWHVsVWk4CkxkRVJ4c1lhaXZodGxhNGhkUy9q
-            M0I1SHdjeXVXL1E4OXgxS2x0cU9ESFkKLS0tIFpNMjNKLzNDWWtvTkhHRDFSTklH
-            T1k1cXp4NXVvVGdkYXp0VVNJejVJRkkK6K31gqRRvo0mbJy6aCTKotVmrfqZoARG
-            w6wKe1TJLWJv8RAD3GQrub9MJwQhUG38Jtj1WrXgNMlF24zFPlZDEQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB1YmhFNHNuaXlFZXMxNmtR
+            S3ZIM25xVnYxNE5kL0RJR0lpNWo1c2ZTczFRCkRKakRNek8xdVcxcFN5Wkc1VDJ5
+            QjJuQjcwZ25RVkpoMXFpQXltU21MOTQKLS0tIFVrNVJ1alAwM1RtTy9zUUIzMkpi
+            bnFVWG5xWW1hSDZob0NzZVZNOHdqRTAKci5uPZI7K/ljVRZ1j2qQFABpf+Anuj2a
+            yqz92A7DbMUSUqmUNCHWg2vKmMwuRL3CXLPzZoXgIN07dpYQlk6qgg==
             -----END AGE ENCRYPTED FILE-----
         - recipient: age1mrnldl334l2nszuta6ywvewng0fswv2dz9l5g4qcwe3nj4yxf92qjskdx6
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB2azhwMEJRZ3JQRnhDNlFR
-            a283MitGTTdaMTZURmFYam85TU43RkdXYTI0CnQxWnRUZ2F6MHd1TWlHMDZ4b1p0
-            WStOVndGTUpmdncvd1k0WlV3c0xKYmMKLS0tIFpSb1hKbHJyM1dCOVBMa1Jabndp
-            NWlGSFhQUngvWG5BQ1lyOFAxanlGdlEKt09a9bMErR3wqbutxhDRfSWp40mmfShJ
-            KAAO2TEMKkEGFvaxYu+G9rbR37h/ZttikJMvIVlfRzmVADlFwO7eHw==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBUZExMODZvbUo5VWt4UWs4
+            ZXRXWkdDczQxcGRJbUFyU3V5bDllampVWTF3CndVSzZESmlwUFcxMjZKODhPY1pz
+            WHo5aC9JOUg0VndhdGIxeU1PU2t2QWMKLS0tIExQelVMSWUrMkUrY3htMVIxTHFo
+            blNkNG02ZTFHR1ZjL1dBbjlDNXk5VmMK+EbzW0Rdq5cxIm8EnQ2P87BTxfMKywyM
+            Q3LGAw4RDR/Gstj9hzpTPnNjb4D5tMcQmeQlAvBriZPFXCrmq5WCXA==
             -----END AGE ENCRYPTED FILE-----
         - recipient: age1hmpdk4h69wxpwqk9tkud39f66hprhehxtzhgw97r6dvr7v0mx5jscsuhkn
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBtYVJLMTZma08xZVo3cEZs
-            Ym1FTU9ZdmxlcUxselltWDRwdUhUdU1udnpjCmh4TlJEK09UdlNFLzN0YnN3WGtt
-            aGpzd25Vckc1TmVCamQ0ekk2QWpraUEKLS0tIG9CNzBOM1g2aTRlQmt3WWVrTlNB
-            ZWsrZy9HSWt4OUdMb3ZZQmNjNGZNZjQKMhvkRnis8P2iV3hoigiN2IXeIFvFuYRK
-            FeMG/cNOtAUsOgHMs4xDPqpLrhpay7IEvwQukBxscd/88I8/ZdGeHQ==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBrSGFIdjJwTkpRdzdIQ2Iz
+            WW1jamZFY1JrTTBZRjM5enZmNkNEMTRaQ24wCjdJY2l4OVJyU2pVR3dQZFg0cHRl
+            dU1xS0gwbWM0MktPL2d6dG1wN1ZsWEkKLS0tIHJscElDRVFrakJCZmtMbk0xaVp4
+            MDBoekhiMWZaeU9IWkcybFNWczVtUUUK4BOBttXkGhmUYTjR68ZvaT0BpbIw67rr
+            Ls5XV6Azkid7GAttNayqb/OjshUco1xIbAyGRz77b5uzMzM1cM6+dA==
             -----END AGE ENCRYPTED FILE-----
         - recipient: age1wrssr4z4g6vl3fd3qme5cewchmmhm0j2xe6wf2meu4r6ycn37anse98mfs
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBtazZ2RUo3ZjdKeStLWW0r
-            bm1NVWJRbjZpZTVRcEFWTnJwYkp2YUN3OTM4CnhRa2RpOS83MW9zaWlUV1M4b21t
-            OG5Ub3VkK1dSMkVzN2VtT0JrWkFSTkEKLS0tIGMvOFU2U243RnpUTThRRWthaHpZ
-            SjBhZjJpNGlUclF3bXRKOXk0KzlHdzQKp/asp39bRfNXyetc3ySVpnzfO6it9D/e
-            XWyhq0yKRFAC8yMYeAuA4kIcNM4DGRc0PnwA/ce3IgHsV1ZNdvdWfg==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBNSmVyNkNiWkxob05lakJI
+            N1dWVWl4bnd0cWV0bzlzQTdhMTZ6aWZJMFU4CkYwc29NTW5PODVVTU5DNFdCV0RO
+            RTJHaDVmbWZ1WFdSRVE4Tk9SbHhsdUkKLS0tIFhiN3M1aGJtY2ZqTkIwYjB6S095
+            WkpCQWlab2s5anVIa2Vlak1vNzI5U0kKRhPzmr9IW0fVDRKzfR1du7KgevNUchxJ
+            GDz5B/EekvwZwhcAGvkE6uwHIAIMaau49S9iwqK4NjIcBIGagoqiDQ==
             -----END AGE ENCRYPTED FILE-----
         - recipient: age1zhxul786an743u0fascv4wtc5xduu7qfy803lfs539yzhgmlq5ds2lznt5
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBnT3lTUEFaN3pOMGhsQ1Ra
-            SVZ6cE90a1BteXgzaldsN3ZTSGZpZXlyWHdvClhJM2ZDRHR0VzVSQXd0b1drK3hG
-            aW8zUWlHcVFkTFpJYXpxWlAwVHV0ckUKLS0tIGVmR0g2Vk56dlZCU01Dd3NzUFZU
-            UHpLRkdQTnhkeGlWVG9VS1hkWktyckEKAdwnA9URLYZ50lMtXrU9Q09d0L3Zfsyr
-            4UsvjjdnFtsXwEZ9ZzOQrpiN0Oz24s3csw5KckDni6kslaloJZsLGg==
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBpSXJKL3RzUEMzZXN5Qmsw
+            aFRrMXE2b2dNU05NeWNuaEZOdkcyMWpvUlM0ClVkMVJoS3Y5SnJxQ3RtaUtncDcw
+            cWRKYjdFbEJ3aWE1ei9wYnpVRGhBd00KLS0tIFFycFgyWGVvMFc3azN3T2Z4aHln
+            UzR0dUp5MHFWdDFya0hlRXM4M1d5YVUKhaXAFsId/SGv5wmKvjTLSAAlDNuSH80H
+            SahjRm7nj5Z6ZHJfBZu9cGoZ5ZdvPsr1DtLgErSndnOnh7TWA8SgGQ==
             -----END AGE ENCRYPTED FILE-----
     lastmodified: "2024-12-09T21:18:23Z"
     mac: ENC[AES256_GCM,data:scdduZPcJZgeT9LarRgxVr/obYsGrJAbMoLGJPPPp19qxOJMTdvYfMz8bxPjCikB4MacEgVZmcnKIn5aCzHJAnCI/7F2wm1DDtW9ZI5qbhDJKSSld+m2leOSPfR8VY/0qj6UNgGnwkwx7dfcAlv8cP2Sp3o1M2oyQxeXPr5FWEg=,iv:JEAwkCewMp0ERmYU62kZkbl7+FET1ZeRr6xeEwt6ioM=,tag:jxvli935X3JyZYe7fFbnLg==,type:str]
     pgp:
-        - created_at: "2024-08-04T00:03:28Z"
+        - created_at: "2025-12-01T10:58:17Z"
           enc: |-
             -----BEGIN PGP MESSAGE-----
 
-            hQIMA0av/duuklWYAQ/7BlyYej03uyhLheXS406h3Ew7v7D+rHHvHjiw3FCJxHoC
-            1revUrMa/M6iTNQteaBvBcYVR4+SpUpRyN/6BSzEQBrNhUBR+70VWL2yzeeb6Bw7
-            GBtuyS7O3DEd0froE3aFETR0NfQ1FfcndOBd3SDKOsCgL5nfJSyOPQtr1OMLKzoW
-            +CARt457xEx0KY7IIpN6e57IT7bVjJx5UuDcN0ZncUyuGUAKHdn0nAHzWqiSZV9w
-            bIftLJ936zvBOhhl3DkzvALnI9+//KPSMM3o/1ti07FoAx8cK2w83VA5Ia9qeNkB
-            wfVuE6f5a2KP/KrfnVCfvweMh/MIEUGb14XEaniyYwvlW5vwF9YgPH6HGc0c+lH6
-            UWy8+Iw7kXkUEJuhtNWyBPJeVKheSBieoWUBZZAK4uWUpChJxfc5M3+P3mgzTIP+
-            7P04xdtS0GwrNwMBiQFqc56hoYDAwMYbn9lFzM3LLq+h8Ztg2G4X9LXjD956TP5C
-            bPV7BFcjTSaAt1TDJcDJRxfrtx6Mo/DLknpGTMRM0UfQ/22uMz2GAH38L0C7lD9B
-            RrKlpDuMKzj/LUihO33Ry9J0IpZ3XF6oaSl/+P+uO9QYNxA/zkuxuSWfqoysldyN
-            bSo1dHGapY/+PVMjM0E/2Dkk9T2IbQUlkVxPrlvuUd3YfrJ7bCva2GDjLvXSp7LS
-            XgGgLgrj54YoOn4uUFsxzDIS7yVps3fCkByVtc1Lc3C8uPPF1B+jOX7O87kZOHag
-            XvT2ze2ITfdxPzoyZO1nWVIGO8rAtQ/vK/Iv2/hHtc4gfzL+gy7GeUWGHkvZ1Kk=
-            =wDmH
+            hQIMA0av/duuklWYAQ/+IxSo/UF0bv0ktR4aYDhZF/7y8Xv56jaZbW+bI8os57SY
+            mk7MbCqMmujf31gDlWwvytn3sEBTs69tre2rJH0JhDnfxrfL4uHJqD2Idtfhejgv
+            6ezh37/aFy0GgkUKUMpVG3sksZjQrKrSvJiHgfIAaiEiNU6grc6EDLPqDrgO0s1V
+            RBUiv2VMyg6a2MBf6TSrdoHw/HtK/PvOgrQ/C3q3jjUzVLUnScIsewwTq0zdmVf6
+            WPG5/sTjKoIYRdjrEZOIZglU61Q2/d0GTGkI7nkr5xl+iJicRO8O4cYmZ2NivMLt
+            pjsYGQ+Kyuxzmgqjh2aRv5uu7p4g1fYIBZdcqmm14Jc/IznNUAdfpgoRGUxEbnGW
+            R6C2eTzvhZGFj0+jssLwcWtGxa2xxPAHL8TbAvroffzx7W9IdyWkmOEaMuyHFAWT
+            FpsdlSkYmQs1H5YCdRnapFkNbaIPsQy/c4dQhzYakrheMdpXo6efSPmk9RdjKZrd
+            HvJaepwJA7Uf9+eY+LgPVTKY4ObJziJEEIM8QwmBW4h7ZujbntUHXhL1dt2Bc8nZ
+            5foSRmLA0lsd59QSPA3lg30TpJARC8aq4dlYsTFqQgHVTHA2W1m5gYvIgNKlhR/F
+            NGNaAWW0+3V6NeQF5UVp/ug4RbJK+qbrQw/+jeyRaPj3TWaFobOfs+Ad5zcL5QfS
+            XgG1ix1Re4pnbeGbTE0QsFQ/Ir0mwPGuNzr1CFuVQWvPUYqA4iv8nlxIj2E43gcL
+            4ihGEE6dKrrwLJuALNq4p7mqnCMJ7/kjLNTRUSmWY8fHaVmX/QL0uGZwYH1Y5P4=
+            =2j4b
             -----END PGP MESSAGE-----
           fp: F7D37890228A907440E1FD4846B9228E814A2AAC
     unencrypted_suffix: _unencrypted